(6) Maintain tools with care. Keep cutting tools sharp and clean. Properly maintained tools, with sharp cutting edges are less likely to bind and are easier to control. (7) Check for misalignment or binding of moving parts, breakage of parts, and any other condition that may affect the tools operation. If damaged, have the tool serviced before using. Many accidents are caused by poorly maintained tools. (8) Use only accessories that are recommended by the manufacturer for your model. Accessories

5 English 8. Mounting the bit For details, refer to the item “Mounting and dismounting the hex-socket or the bit”. Self-drilling screw Fig. 6 1 – 1.5 mm Sub-Stopper (A) HOW TO USE THE SCREW DRIVER 1. Switch operation and rotational speed adjustment Bit rotational speed can be regulated between 0 – 2600/min (W6VB2) or 0 – 1700/ min (W8VB) varying the degree by which the trigger switch is pulled. Rotational speed increases as the trigger switch is pulled, and reaches a maximum speed of 2600/min (W

Lire soigneusement et bien assimiler ces instructions avant usage. Prima dell’uso leggere attentamente e comprendere queste instruzioni. Deze gebruiksaanwijzing s.v.p. voor gebruik zorgvuldig doorlezen. Leer cuidadosamente y comprender estas instrucciones antes del uso. Handling instructions Bedienungsanleitung Mode d’emploi Instruzioni per l’uso Gebruiksaanwijzing Instrucciones de manejo The exploded assembly drawing should be used only for authorized service center. Item No. Part Name 1 Name p

3. Before starting to break, chip or drill into a wall, floor or ceiling, thoroughly confirm that such items as electric cables or conduits are not buried inside. English SPECIFICATIONS Voltage (by areas)* (110V, 220V, 230V, 240V) Input* 460W No-load speed 0-900/min Full-load impact rate 3500/min Capacity: concrete steel wood 20 mm 13 mm 15 mm Weight (without cord and side handle) 3.1 kg * Be sure to check the nameplate on product as it is subject to change by areas. STANDARD ACCESSORIES (1) Cas