7452-7- 7 mm 10 mm 13 mm 16 mm 19 mm 8 mm 11 mm 14 mm 17 mm 9 mm 12 mm 15 mm 18 mm □ 14 x 18 mm Order No. 7852-7- 13 mm 17 mm 22 mm 30 mm 14 mm 18 mm 24 mm 32 mm 15 mm 19 mm 27 mm Ring insert tools 9 x 12 mm Order No. 7452-8- 7 mm 10 mm 12 mm 14 mm 17 mm 8 mm 11 mm 13 mm 15 mm 19 mm □ 14 x 18 mm Order No. 7852-8- 13 mm 15 mm 19 mm 24 mm 30 mm 14 mm 17 mm 22 mm 27 mm 32 mm Open-ring insert tools □ 9 x 12 mm Order No. 7452-9- 10 mm 12 mm 14

7452-7- 7 mm 10 mm 13 mm 16 mm 19 mm 8 mm 11 mm 14 mm 17 mm 9 mm 12 mm 15 mm 18 mm □ 14 x 18 mm Order No. 7852-7- 13 mm 17 mm 22 mm 30 mm 14 mm 18 mm 24 mm 32 mm 15 mm 19 mm 27 mm Ring insert tools 9 x 12 mm Order No. 7452-8- 7 mm 10 mm 12 mm 14 mm 17 mm 8 mm 11 mm 13 mm 15 mm 19 mm □ 14 x 18 mm Order No. 7852-8- 13 mm 15 mm 19 mm 24 mm 30 mm 14 mm 17 mm 22 mm 27 mm 32 mm Open-ring insert tools □ 9 x 12 mm Order No. 7452-9- 10 mm 12 mm 14

7452-7- 7 mm 10 mm 13 mm 16 mm 19 mm 8 mm 11 mm 14 mm 17 mm 9 mm 12 mm 15 mm 18 mm □ 14 x 18 mm Order No. 7852-7- 13 mm 17 mm 22 mm 30 mm 14 mm 18 mm 24 mm 32 mm 15 mm 19 mm 27 mm Ring insert tools 9 x 12 mm Order No. 7452-8- 7 mm 10 mm 12 mm 14 mm 17 mm 8 mm 11 mm 13 mm 15 mm 19 mm □ 14 x 18 mm Order No. 7852-8- 13 mm 15 mm 19 mm 24 mm 30 mm 14 mm 17 mm 22 mm 27 mm 32 mm Open-ring insert tools □ 9 x 12 mm Order No. 7452-9- 10 mm 12 mm 14

slotted, PHILLIPS, POZIDRIV, hex. Here too the requirement is that the same tightening torque (Nm) is used. Product code EAN-Code 731415+ Nm o o i—;—g ^3 3 mm mm mm BE-6990-IP6 1846725 0,6 IP6 T6 55 32 x 113 168 100 1 BE-6990-IP7 1846732 0,9 IP7 T7 55 32 x 113 168 100 1 BE-6990-IP8 1846749 1,2 IP8 T8 55 32 x 113 168 100 1 BE-6990-IP9 1846756 1,4 IP9 T9 65 32 x 113 178 100 1 BE-6990-IP10 1846763 2,0 IP10 T10 65 32 x 113 178 100 1 BE-6990-IP15 1846770 3,0 IP15 T15 65 32 x 113 178 10

Excessively high tightening torque leads to rapid screw fracture. Operation Torque Screwdriver BE-6990-IP uses a built-in spring. It is preset to a fixed torque and cannot be recalibrated. The blades can be changed. Finish of the blade Blade made of VANADIUM EXTRA. Blade nickel- and chrome-plated, hardened over the entire length, tip black oxidized. Patent No.: US 6,487,943 B1 (USA), SE 513 457 (Sweden), TW 143955 (Taiwan) Patent pending: Europe, Japan BE-6990-IP6 - IP15 Accuracy ±10% wit

When undoing screws, there is no torque limit. 3" Correct size The screwdriver has a fixed torque, which is matched to the actual size of the blade. The size is specified by the identification on the blade and on the handle of the screwdriver. Changing the blade As required, the blade can be removed from the handle and replaced by a new blade. Care must be taken to ensure that the figure on the blade (Nm) agrees with the figure on the handle. Using different blade profiles Torque Screwd

MAX TORQUE 125% MAX PRESET 100% TOLERANCE +% PRESET VALUE TOLERANCE –% *MIN PRESET 10% ZERO TORQUE OK-area applied torque *IZO-DM/DFM-135 = 5% FEEL BACK Deciding Advantages The BAHCO IZO-D/DF, -DM/DFM is the only electronic torque tools which combines accuracy and ease of operation of modern electronic torque tools with a feelable signal when the set torque range is reached. This provides a modern and precise alternative to conventional mechanical torque tools. Feedback by feeling – FEELBACK The

These products will be found everywhere, where quality has no compromise. Product design: winner 2003 The award “red dot” for high design quality, expressing innovation in form and function in an exemplary manner, is presented to: Electronic Torque Wrench IZO-D-135 The red dot design award is one of the most prestigious international design competitions. Since 1955, expert juries have made awards annually in the competition for outstanding design achievements which set new standards in the relev

stanfudnaTrcdthisoe a nInsZd aO nr-edDq fuMeiar/etDumrFeeMsn tt sos e wmrieethse ithn ta hasen e yhx itgehnedsetd application. docoupmeTreahntetiaosteni o anlnl ofdow tro ft hupelrlo uavsniedarel yt oasp ifspu alrintehde prt orsoriqmcuepesls id fayt ah is control at any time. Data T ransmission Dir via eccatb Pler intout Later Printout fr om memory Memory ISO 9000 The BAHCO IZO-DM/DFM allows to document and analyse his torque data line with ISO-9000 requirements. In many areas of industrial asse

IZO-DF-30 390 295 360 In some applications it is necessary to add an IZO-DFM-30 390 295 360 extension to the wrench, especially when some work has to be carried out in confined areas. In such cases it is necessary to compensate for this extension by reducing the program Dimensions mm L L1 L2 IZO-D-135 450 345 410 med set torque on the wrench according to following formula: IZO-DM-135 450 345 410 IZO-DF-135 445 345 395 C = L1 x T IZO-DFM-135 445 345 395 L1 + B Dimensions mm L L1 L2 L1= Distance f