You may wish to soften your laundered fabrics or reduce the static electricity in them, by using a dryer-applied fabric softener or an anti-static conditioner. We recommend you use either a fabric softener in the wash cycle, according to the manufacturer’s instructions for those products, or try a dryer-added product for which the manufacturer gives written assurance on the package that their product can be safely used in your dryer. Service or performance problems caused by use of these produc

Cycle Signal Option (on some models) This signal will sound just before the end of the cycle to remind you to remove the clothes. On some models the signal sound level cannot be adjusted. If you selected the WRINKLE CARE option, the signal will sound at the end of the drying time and will sound several times during the WRINKLE CARE cycle. This will remind you that it is time to remove the clothes. NOTE: Remove garments promptly at the sound of the signal. Place clothes on hangers so wrinkles wo

. . . . . . 2–4 Operating Instructions Control Panel . . . . . . . . . . . .5, 6 Control Settings . . . . . . . . . . . .7 Features . . . . . . . . . . . . . . . . .8, 9 Loading and Using the Dryer . . . . . . . . . . . . . . . . .11 Reversing the Door . . . . . . . . . 10 Venting the Dryer . . . . . . . . . .12 Troubleshooting Tips . . . 13, 14 Consumer Support Consumer Support . . Back Cover Warranty . . . . . . . . . . . . . . . . .15 Write the model and serial numbers here: Model # _________

Below are fabric care label “symbols” that affect the clothing you will be laundering. WASH LABELS DRY LABELS Machine wash cycle Normal Permanent Press/ Gentle/ Do not wash Do not wring wrinkle resistant delicate Hand wash Water temperature Hot Warm Cold/cool (50°C/120°F) (40°C/105°F) (30°C/85°F) Tumble dry Dry Normal Permanent Press/ wrinkle resistant Gentle/ delicate Do not tumble dry Do not dry (used with do not wash) Heat setting High Medium Low No heat/air Specialinstructions Line dry/ hang

10 Loading and using the dryer. Always follow the fabric manufacturer’s care label when laundering. Sorting and Loading Hints As a general rule, if clothes are sorted properly for the washer, they are sorted properly for the dryer. Do not overload. This wastes energy and causes wrinkling. Do not dry the following items: fiberglass items, woolens, Do not add fabric softener sheets once the load has rubber-coated items, plastics, items with plastic trim and become warm. They may cause fabric softe

We recommend you use either a fabric softener in the wash cycle, according to the manufacturer’s instructions for those products, or try a dryer-added product for which the manufacturer gives written assurance on the package that their product can be safely used in your dryer. Service or performance problems caused by use of these products are the responsibility of the manufacturers of those products and are not covered under the warranty to this appliance. Before discarding a dryer, or removin

It provides approximately 15 minutes of no-heat tumbling after the clothes are dry. This option can only be used with the COTTONS and EASY CARE cycles. If you are using the CYCLE SIGNAL knob and you select the WRINKLE CARE option, a signal will sound at the end of the drying time and several times during the WRINKLE CARE cycle. This will remind you that it is time to remove the clothes. If WRINKLE CARE is not on, the dryer will stop once the timer reaches the WRINKLE CARE mark on the cycle dial.

Do not use this drying rack when there are other clothes in the dryer. Stainless Steel Drum (on some models) The stainless steel used to make the normal use, the drum will not rust or dryer drum provides the highest reliability corrode. These surface blemishes will available in a GE dryer. If the dryer drum not affect the function or durability of should be scratched or dented during the drum. 9 Consumer SupportTroubleshooting Instructions About reversing the door. Safety InstructionsConsumer S

Avoid resting the duct on sharp objects. Venting must conform to local building codes. Correct Venting Incorrect Venting 12 Before you call Customer Support… Troubleshooting Tips Save time and money! Review the charts on the following pages, or visit You may not need to call Customer Support. Problem Possible Causes What To Do Dryer doesn’t start Dryer is unplugged • Make sure the dryer plug is pushed completely into the outlet. Fuse is blown/circuit breaker is tripped • Check the house fuse/c

Close supervision is necessary if this appliance is used by or near children. Do not allow children to play on, with or inside this or any other appliance. WHEN USING YOUR DRYER Keep all laundry aids (such as detergents, bleaches, etc.) out of the reach of children, preferably in a locked cabinet. Observe all warnings on container labels to avoid injury. Never climb on or stand on the dryer top. Never reach into the dryer while the drum is moving. Before loading, unloading or adding clothes,