i--w® Adjustable Drill Press Support MODEL H6238 Introduction The Model H6238 Adjustable Drill Press Support (Figure 1) provides stability and control for drilling long workpieces. The Model H6238 was carefully packed when it left our warehouse. If you discover this unit is damaged after you have signed for delivery, please immediately call Customer Service at (570) 546-9663 for advice. Save the containers and all packing materials for possible inspection by the carrier or its agent. Other

Typical socket extensions that remain perpendicular to the ratchet head do not change the length of the torque wrench, and therefore, do not change the torque applied to the fastener. Extension Formula L-H ™=TE (ttt) TE = Actual Torque at Extension TW = Torque Setting on Wrench E = Extension Length L = Torque Wrench Length from Drive to Center of Handle Example: To reach 50 Lb.ft of torque with a 6" long extension, set the torque on the wrench to 37 Lb.ft. See the steps below for details.

An undersized cord will cause a drop in line voltage resulting in loss of power and overheating. Your extension cord must also contain a ground wire and plug pin. Always repair or replace extension cords if they become damaged. Minimum Gauge for Extension Cords AMP RATING LENGTH 25ft 50ft 100ft 0-6 18 16 16 7-10 18 16 14 11-12 16 16 14 13-16 14 12 12 17-20 12 12 10 21-30 10 10 No 11. WEAR PROPER APPAREL. Do not wear loose clothing, gloves, neckties, rings, bracelets, or other jewel

8:1 Inventory Refer to Figure 1 and the table below to inventory the contents of the shipping box . REF PART # DESCRIPTION 1V2 PH8370001V2 MOUNTING ASSY W/O WIRES V2.07.11 2 PH8370002 GEAR SAFETY COVER 3V2 PH8370003V2 PWR FEED & LIMIT SWITCH ASSY V2.07.11 4 PH8370004 LIMIT STOP 5 PH8370005 LIMIT SWITCH BRACKET 6 PH8370006 LEADSCREW GEAR 7V2 PH8370007V2 RAPID SWITCH W/LED V2.07.11 8 PH8370008 ZYTEL GEAR 7V2 2 X\ A 1V2 \ " * 8, <* 1 6 3V2 « A N : 4 Figure 1. Model H8370 inventory .

PRINTED IN CHINA SAFETY For Your Own Safety Read Instruction Manual Before Operating This Equipment Indicates an imminently hazardous situation which, if not avoided, WILL result in death or serious injury. Indicates a potentially hazardous situation which, if not avoided, COULD result in death or serious injury. Indicates a potentially hazardous situation which, if not avoided, MAY result in minor or moderate injury. It may also be used to alert against unsafe practices. This symbol is used to

Make sure operation instruc-wrenches before turning machinery tions are safe and clearly under-ON. stood. 18. CHECK FOR DAMAGED PARTS 8. KEEP CHILDREN AND VISITORS BEFORE USING MACHINERY. AWAY. Keep all children and visi-Check for binding and alignment tors a safe distance from the work of parts, broken parts, part mount- area. ing, loose bolts, and any other conditions that may affect machine 9. MAKE WORKSHOP CHILD operation. Repair or replace dam- PROOF. Use padlocks, master aged parts. switch

Average air consumption is 6 CFM and the recommended air pressure is 90 PSI. Includes a V NPT quick connect fitting and chuck key. Inventory A. Air Drill........................................................1 B. W NPT Quick Connect Fitting (male)........1 C. Chuck Key..................................................1 Lubricating Your New Air Drill Lubricate your air drill with pneumatic tool oil. If you do not have a lubricator installed in your air line, place one drop of pneumatic too