Read manual completely before first using this product. SAVE THESE INSTRUCTIONS GENERAL SAFETY RULES-FOR ALL BATTERY OPERATED TOOLS SAVE THESE INSTRUCTIONS Work Area 1 ) Keep your work area clean and well lit. Cluttered benches and dark areas invite accidents. 2) Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases, or dust. Power tools create sparks which may ignite the dust or fumes. 3) Keep bystanders, children, and visitors away whi

Follow instructions in the Maintenance section of this manual. Use of unauthorized parts or failure to follow Maintenance Instructions may create a risk of shock or injury. SPECIFIC SAFETY RULES 1) Hold tool by insulated gripping surfaces when performing an operation where the cutting tool may contact hidden wiring. Contact with a “live” wire will also make exposed metal parts of the tool “live” and shock the operator. Symbol meaning V Volts --- Direct Current *1. no load speed „7 min r

Unauthorized copying and distribution is a violation of law. EY6506-U1 1 SCHEMATIC DIAGRAM 2 WIRING CONNECTION DIAGRAM 2 EY6506-U1 3 DISASSEMBLY/ASSEMBLY INSTRUCTIONS HOW TO DISASSEMBLE MAIN UNIT. Ref. No. 1A Procedure 1A Removal of the Fixation cover and Housing. 1. Remove four screws tightened with the fixation cover and take it out. 2. Remove eight housing screws. Ref. No. 1B Procedure 1A > >>>> 1B Removal and attachment of the Motor. (Removal) 1. Take out the motor with the driving block fro

Use of the power tool for operations different from those intended could result in a hazardous situation. Battery Tool Use and Care 1) Ensure the switch is in the off position before inserting battery pack. Inserting battery pack into power tools that have the switch on invites accidents. ) Recharge only with the charger specified by the manufacturer. A charger that is suitable for one type of battery pack may create a risk of fire when used with another battery pack. 3) Use power tools only wit

.GENERALSAFETYRULESFORALLBAT- TERYOPERATEDTOOLS WARNING! READ AND UNDERSTAND ALL INSTRUCTIONS. Failure to follow all instructions listed below, may result in electric shock, fire and/or serious personal injury. SAVETHESEINSTRUCTIONSWorkArea 1) Keep your work area clean and welllit. Cluttered benches and dark areas invite accidents. 2) Do not operate power tools inexplosive atmospheres, such asin the presence of flammable liquids, gases, or dust. Power tools create sparks which may ignite the dus

3) Different bolt diameters The size of the bolt diameter affects the tightening torque. Generally, as the bolt diameter increases, tightening torque rises. - 11 EY7270(EU).indb 11 13:25:06 2006/05/25 4) Tightening conditions Tightening torque will vary, even with the same bolt, according to grade, length, and torque coefficient (the fixed coefficient indicated by the manufacturer upon production). Tightening torque will vary, even with the same bolting material (e.g. steel), according to the su

• Charging will not start if the battery pack is warm (for example, immediately after heavy-duty operation). The orange standby lamp will be flashing until the battery cools down. Charging will then begin automatically. 4. The charge lamp (green) will flash slowly once the battery is approximately 80% charged. 5. When charging is completed, the charging lamp will start flashing quickly in green color. 6. If the temperature of the batter pack is 0°C or less, charging takes longer to fully charge

Read manual completely before first using this product and save this manual for future use. IMPORTANT Ce mode d’emploi contient des informations sur la securite. Lisez-le en entier avant d’utiliser le produit et conservez-le pour reference. IMPORTANTE Este manual contiene informacion de seguridad. Lea completamente este manual antes de utilizar por primera vez este producto, y guardelo para poder consultarlo en el futuro. Index/Index/Indice English: Page 3 Francais: Page 17 Espanol: Pagina 33 FU

• Do not cover vent holes on the charger and the battery pack. • Unplug the charger when not in use. Li-ion Battery Pack NOTE: Your battery pack is not fully charged at the time of purchase. Be sure tocharge the battery before use. Battery charger (EY0L80) 1. Plug the charger into the AC outlet. NOTE: Sparks may be produced when theplug is inserted into the AC power supply, but this is not a problem in terms of safety. 2. Insert the battery pack firmly intothe charger. 1 Line up the alignment ma

The battery will discharge rapidly and damage to the unit may occur. 6)During charging, the charger may become slightly warm. This is normal. Do NOT charge the battery for a long period. 7)When storing or carrying the tool, set the Forward/Reverse lever to the center position (switch lock). 8)Do not strain the tool by holding the trigger switch halfway (speed control mode) so that the motor stops. II.ASSEMBLY NOTE: When attaching or removing a bit or socket, disconnect battery pack from tool or