Assessments - 5, GPA: 4.2
(
)
)
|
Facilidade de uso
To go back to the previous level: Press b on the remote control. Initial Settings General Operation 1 11 Press SETUP. The setup menu appears. The screen will show the current setting for the selected item. 2 22 Use v/V to select the desired item. 3 33 While the desired item is selected, press B to move to the second level. 4 44 Use v/V to select the second desired item. 5 55 Press B to move to the third level. 6 66 Press v/V to select the desired setting then press ENTER to confirm your selection. Some items require additional steps. 7 77 Press SETUP to exit the setup menu. LANGUAGE LANGUAGE Menu Language Original English Off Original Disc Audio Disc Subtitle Disc Menu Move Select Menu Language Select a language for the VCR and DVD’s setup menu and information display. Disc Language (Audio, Subtitle, Menu) DVD Select a language for the disc’s Audio, Subtitle, and Menu. Original : The original language set for the disc is selected. Other : To select another language, press number buttons to enter the corresponding 4-digit number according to the language code list on page 37. If you enter the wrong language code, press CLEAR. DISPLAY DISPLAY TV Aspect Widescreen 16 : 9 Display Mode OffProgressive Scan Move Select TV Aspect DVD 4:3: Select when a standard 4:3 TV is connected. 16:9: Select when a 16:9 wide TV is connected. Display Mode DVD The Display Mode setting works only when the TV Aspect mode is set to “4:3”. Letterbox: Displays theatrical images with masking bars above and below the picture. Panscan: Select when a conventional TV set is connected. The video material formatted in the Pan & Scan style is played back in that style (Both sides of the picture are cut off). Progressive Scan DVD Progressive Scan Video provides the highest quality picture with less flickering. If you are using the COMPONENT/ PROGRESSIVE SCAN VIDEO OUT jacks, but are connecting the DVD+VCR to a standard (analog) television, set Progressive Scan to Off. If you are using the Component Video jacks for connection to a TV or monitor that is compatible with a progressive scan signal, set Progressive Scan to On. Caution • Once the setting for progressive scan output is entered, a confirmation message appears. Use the b/B buttons to select “Enter” and press the ENTER button. An image will be visible only on a progressive scan compatible TV or monitor. If you set Progressive Scan to ON in error, you must reset the DVD+VCR. First, remove the disc in the DVD+VCR. Next, press STOP (x) and hold it for five seconds before releasing it. The video output will be restored to the standard setting, and a picture will once again be visible on a conventional analog TV or monitor. •Do not turn off the DVD+VCR while the "PROGRESSIVE SCAN MODE" message is displayed on the TV screen. 18 DVD Operation Setup (Continued) DVD Operation Setup (Continued) AUDIO Each DVD disc has a variety of audio output options. Set the player’s Audio Output according to the type of audio system you use. Dolby Digital Bitstream: Select “Bitstream” if you connected the DVD Player’s DIGITAL OUT jack to a Dolby Digital decoder (or an amplifier or other equipment with a Dolby Digital decoder). PCM: Select when connected to a two-channel digital stereo amplifier. DVDs encoded in Dolby Digital will be automatically downmixed to two-channel PCM audio. DTS Bitstream: Select “Bitstream” if you connected the DVD Player’s DIGITAL OUT jack to a DTS decoder (or an amplifier or other equipment with a DTS decoder). Off: If you select “Off”, the DTS signal through the DIGITAL OUT jack is not outputted. MPEG Bitstream: Select “MPEG” if you connected the DVD Player’s DIGITAL OUT jack to a MPEG decoder (or an amplifier or other equipment with a MPEG decoder). PCM: Select when connected to a 2-channel digital stereo amplifier. The DVD+VCR outputs sounds in the PCM 2ch format when you play a DVD video disc recorded on the MPEG1, or MPEG2 recording system. Sample Freq. (Frequency) To change the Sample Frequency setting, first select the desired Dolby Digital, DTS, and MPEG mode as indicated as above. If your receiver or amplifier is NOT capable of handling 96 kHz signals, select 48 kHz. When this choice is made, this unit will automatically convert any 96 kHz signals to 48 kHz, so your system can decode them. If your receiver or amplifier is capable of handling 96 kHz signals, select 96 kHz. When this choice is made, this unit will pass through each type of signal without any further processing. Dynamic Range Control (DRC) With the DVD format, you can hear a program’s sound- track in the most accurate and realistic presentation possible, thanks to digital audio technology. However, you may wish to compress the dynamic range of the audio output (the difference between the loudest and quietest scenes), e.g., when watching a movie late at night. With DRC set to ON, you can listen to a movie at a lower volume without losing sound clarity. Vocal Set Vocal to On only when a multi-channel karaoke DVD is...