Assessments - 0, GPA: 0
(
)
)
|
Facilidade de uso
To return to the default setting Select the sybol or the item, then press CLEAR. 39EN Dolby Digital Surround Dolby Digital Surround Setting for Dolby Digital Surround To enjoy Dolby Digital Surround sound, set the output signal from the 5.1 channel output connectors. Note To enjoy the original Dolby Digital (AC-3) sound through the 5.1 OUTPUT connectors, do not set “DIGITAL OUT” to “D-PCM” under “INITIAL SETUP 2” in the setup display. For details, see page 35. SET UP ENTER ?/>/.// 1 Press SET UP and select “ 2”, then press ENTER. 2 Set “MODE” to the desired item. * These settings also affect the output from the LINE OUT (AUDIO 1, 2) connectors. Notes • When you select an item, the sound cuts off for a moment. • When you select “PRO LOGIC”, the sound may only come from the center speaker depending on the disc. • When the playing signal does not contain the surround component, the effects may be difficult to hear even if you select “PRO LOGIC”, “VES A” or ”VES B.” In this case, set this item to “OFF”. • If the sound distortion occurs when you select “PRO LOGIC”, “VES A” or ”VES B,” set this item to “OFF”. • If you connect the front speakers only, there is no surround effects even if you select “PRO LOGIC.” • When you select “VES A” or ”VES B,” you cannot adjust the level or the balance of the speakers except for the front speakers. • If both the front speakers are not placed an equal distance from your listening position, the effects may be difficult to hear even though you select “VES A” or “VES B.” • The setting “PRO LOGIC” affects only when: – you play a CD/VIDEO CD – you play the PCM sound track on a DVD – you play the “DOLBY DIGITAL 2/0“ sound track on a DVD. Ill.1 VES (Virtual Enhanced Surround) A L R Ill.2 VES (Virtual Enhanced Surround) B L R Default setting is “OFF.” 1 2 5. 1 OUTPUT SETUP 2 TEST TONE: FRONT ENTER QUIT SETUP 1 2 REAR LEVEL CENTER BALANCE SUBWOOFER MODE: OFF OFF 0. 0dB REAR 0. 0dB 0. 0dB 0. 0dB 0. 0dB pMODE • OFF : outputs all channel signals recorded on the DVD. When you connect fewer than 5 (+1) speakers, the player distributes the output signal for the missing speaker to other speakers appropriately. When you play a CD or a VIDEO CD, outputs the stereo signal to the front speakers. • PRO LOGIC : outputs the Pro Logic processed signals when the input signals are stereo. • VES A* : uses 3D sound imaging to create virtual rear speakers from the sound of the front speakers (L, R) without using actual rear speakers. The virtual speakers are reproduced as shown in Ill. 1. • VES B* : uses 3D sound imaging to create virtual rear speakers from the sound of the front speakers (L, R) without using actual rear speakers. The virtual speakers are reproduced as shown in Ill. 2. 40EN Dolby Digital Surround Dolby Digital Surround To display the playing channels You can display the playing channels on the screen. In Dolby Digital (AC-3) format, the signals from monaural to 5.1 channel can be recorded on a DVD. Depending on the DVD the numbers of the recorded channels are different. 1 2 3 4 5 6 7 8 9 0 DISPLAY Press DISPLAY repeatedly until the channel display appears. DVD TITLE: 1 : 32 : 55 CHAPTER: SUBTITLE: AUDIO: ANGLE: PLAY 32 ( 50 ) 30 ( 50 ) ENGLISH ( 32 ) ENGLISH ( 8 ) 1 ( 9 ) L C R LS RSLFE