Assessments - 3, GPA: 3.3
(
)
)
|
por este dispositivo também tem outras instruções :
DVD-player - RDR-AT105 (3.02 mb)
DVD-player - RDR-AT105 (7.44 mb)
Facilidade de uso
Y ZOOM (RDR-AT100/AT200 only) (107) Zooms an image during a slideshow. * Use the tactile dot as a reference when operating the recorder. ,continued Front panel A [/1 (on/standby) (25) Turns the recorder on or off. B (remote sensor) (23) C Disc tray (34) D Front panel display (13) E Z (open/close) (34) Opens or closes the disc tray. F N (play) (65, 107) The N button has a tactile dot*. G x (stop) (65, 97, 107) H HDD Lights up when the HDD is selected. DVD Lights up when the DVD is selected. I PROGRAM +/– (35) The + button has a tactile dot*. J INPUT (input select) (63) Selects an input source. K x REC STOP (35) L z REC (35) M LINE 2 IN (S VIDEO/VIDEO/ L(MONO) AUDIO R) jacks (30) Connect a VCR or similar recording device to these jacks. N ONE-TOUCH DUB (89, 93) Starts dubbing from a connected digital video camera. O DV IN jack (91) Connect a DV camcorder to this jack. P USB jack (type A) (95, 101) Connect a USB device to this jack. Q PictBridge USB jack (type B) (111) Connect a PictBridge-compatible printer to this jack. * Use the tactile dot as a reference when operating the recorder. To lock the recorder (Child Lock) You can lock all of the buttons on the recorder so that the settings are not cancelled by mistake. When the recorder is turned off, hold down x (stop) on the recorder until “LOCKED” appears in the front panel display. The recorder does not work except for timer recordings and Synchro-Recording (RDRAT100/ AT200 only) while the Child Lock is set. To unlock the recorder, hold down x (stop) on the recorder until “UNLOCKED” appears in the front panel display. Front panel display A SYNCHRO REC indicator (RDRAT100/ AT200 only) (64) Lights up when the recorder is set to stand by for Synchro-Recording. B Displays the following: • Playing time • Current title/chapter/track/index number • Recording time/recording mode •Clock • Programme position • EPG indication (RDR-AT105/AT107/ AT205 only) (47) “EPG” appears when receiving the GUIDE Plus+ data. • TV Direct Rec. indication (35) “TV” appears in the right most two digits. C NTSC indicator (118, 123) Lights up when NTSC colour system is selected. D VPS/PDC indicator (55, 59) Lights up when the VPS/PDC function is turned on. E Timer indicator (52, 58) Lights up when the timer for recording is set. F Disc type Lights up when a recordable DVD-R or DVD-RW disc is loaded. G Command Mode indicator (132) Displays the Command Mode of the remote. When the Command Mode for the recorder is set to “3 (Default setting),” either “1” or “2” does not appear. H Recording status I Dubbing direction indicator J Playing status ,continued Rear panel A AERIAL IN/OUT jacks (15) B LINE 2 OUT (R-AUDIO-L/VIDEO) jacks (18, 21) C LINE 1/DECODER jack (29) D G-LINK jack (RDR-AT105/ AT107/AT205 only) (16) Connect the set top box controller to this jack. E HDMI OUT (high-definition multimedia interface out) jack (18, 21) F DIGITAL OUT (COAXIAL) jack (21) G AC IN terminal (22) H LINE 3 – TV jack (18) I LINE 2 OUT (S VIDEO) jack (18) J COMPONENT VIDEO OUT (Y, PB/CB, PR/CR) jacks (18) Hookups and Settings Hookups and Settings Hooking Up the Recorder Follow steps 1 through 6 to hook up and adjust the settings of the recorder. Do not connect the mains lead until you reach “Step 4: Connecting the Mains Lead” on page 22. b Notes • See “Specifications” (page 155) for a list of supplied accessories. • Plug in cords securely to prevent unwanted noise. • Refer to the instructions supplied with the components to be connected. • You cannot connect this recorder to a TV that does not have a SCART or video input jack. • Be sure to disconnect the mains lead of each component before connecting. Step 1: Connecting the Aerial Cable and Set Top Box Controller Select one of the following aerial hookups. Do NOT set “LINE 1 In” to “Decoder” in the “Video In/Out” setup (page 123) when making connection A. “Standby Mode” is set to “Mode 1” (default) in the “Basic” setup and the picture does not appear on the TV when the recorder is in standby mode. To watch TV in standby mode, set “Standby Mode” to “Mode 2” in “Step 6: Easy Setup” (page 25) or use a splitter to divide aerial input signals between the TV and the recorder. If you have Hookup Set top box receiver A (page 16) No set top box receiver B (page 17) z Hint You can also set “Standby Mode” to “Mode 2” in the “Basic” setup (page 118). b Notes • If your aerial is a flat cable (300-ohm twin lead cable), use an external aerial connector (not supplied) to connect the aerial to the recorder. • If you have separate cables for AERIAL antennas, use an AERIAL UHF/VHF band mixer (not supplied) to connect the aerial to the recorder. • If you disconnect the recorder’s mains lead, you will not be able to view the signals from the connected set top box receiver. Hookups and Settings ,continued A: Connecting a set top box receiver (RDR-AT105/AT107/AT205 only) With this hookup, you can record any programme position on the set top box receiver. To watch cable programmes, you...
Este manual também é adequado para os modelos :DVD-player - RDR-AT100 (7.5 mb)
DVD-player - RDR-AT107 (7.5 mb)
DVD-player - RDR-AT200 (7.5 mb)
DVD-player - RDR-AT205 (7.5 mb)