Assessments - 3, GPA: 4.7
(
)
)
|
Facilidade de uso
MOVE IS INVALID. The sub clip cannot be moved. This appear hen an attempt is made to execute a MOVE operation (see page 71) when there are no sub clip in the current clip list, or when there is only 1. REC INHI! The disc is write protected. This appears when an attempt is made to execute an operation that requires recording while the disc is write protected. DISC FULL! The disc is full. This appears when an attempt is made to execute an operation that requires recording while the disc is full. SHOT MARK DOES NOT EXIST. The specified shot mark has not been recorded. This appears when an attempt is made to execute a DELETE SHOT MARK operation on a clip when the specified shot mark has not been recorded for that clip. REC START CANNOT BE DELETED. REC START cannot be deleted. This appears when an attempt is made to delete a REC START with a DELETE SHOT MARK operation. DELETE SHOT MARK can delete only SHOT MARK1 and SHOT MARK2 marks. CLIP IS LOCKED. The clip is locked. This appears when an attempt is made to delete a clip, set the clip thumbnail, or delete a shot mark when the clip is locked. ALL CLIPS ARE LOCKED. All clips are locked. This appears when an attempt is made to execute a LOCK ALL CLIPS operation when all clips are already locked. ALL CLIPS ARE UNLOCKED. All clips are unlocked. This appears when an attempt is made to execute an UNLOCK ALL CLIPS operation when all clips are already unlocked. Appendix Alarms relating to audio and video signals Alarm message in time data display section Alarm message in monitor video section Action No INPUT! a) INPUT VIDEO IS NOT DETECTED. CHECK THE VIDEO INPUT MODE AND SUPPLY A VIDEO SIGNAL TO VIDEO INPUT. • Check the setting of V INPUT on the HOME page of the function menu (see page 81). • Input an HDSDI signal. Troubleshooting Alarm message in time data display section Alarm message in monitor video section Action EMPHASIS! a) INPUT AUDIO EMPHASIS IS NOT SUPPORTED. CHECK THE EMPHASIS OF THE AUDIO INPUT SIGNAL. Check the emphasis of the audio input signal. a) Displayed only when DISPLAY CONTROL >ALARM is set to “ON”. Alarms relating to sensors and drives Alarm message in time data display section Alarm message in monitor video section Description/action FAN Stopped FAN MOTOR STOPPED. Contact your Sony dealer. DR-FAN Stop High TEMP! DRIVE FAN MOTOR STOPPED. HIGH TEMPERATURE. HIGH TEMPERATURE IN DRIVE. The unit will not stop operating, but if you continue to use it in this state temperatures inside the unit or the drive will rise, possibly resulting in failure or fire. Note Error Messages Error codes appear in the time data display when an error (usually a hardware problem) occurs. In addition, both error messages and error codes appear in the monitor video section and on the video monitor connected to the unit. When an error message appears, follow the instructions in the error message to resolve the problem. Error code Error code in time data display section ERROR AN ERROR HAS BEEN DETECTED. INFORM SERVICE OF FOLLOWING CODE: PRESS EJECT KEY TO EJECT DISC. Error code in monitor video section To Eject Discs With the Unit Powered Off As an emergency measure, disc cartridges can be removed with the unit powered off. This operation should always be done by a trained service technician. About i.LINK This section explains the specifications and features of i.LINK. What is i.LINK? i.LINK is a digital serial interface designed to integrate devices equipped with i.LINK connectors. i.LINK allows your device to: -Perform two-way transmission and reception of data such as digital audio and digital video signals. -Control other i.LINK devices. -Easily connect multiple devices with a single i.LINK cable. Your i.LINK device is capable of connecting to a wide range of digital AV devices for data transfer and other operations. Other advantages include the following feature. When connected to multiple i.LINK devices, your i.LINK device can perform data transfer and other operations not only with the directly connected devices but also with any of the devices that are connected to those devices. Therefore, you do not need to be concerned with device connection order. However, depending on the features and specifications of the connected devices, you may need to use certain functions differently, and you may not be able to transfer data or perform certain operations. i.LINK, a nickname for IEEE 1394 proposed by Sony, is a trademark supported by many companies worldwide. IEEE 1394 is an international standard defined by IEEE, the Institute of Electrical and Electronics Engineers, Inc. Appendix About i.LINK Note Note The unit can be connected to one device with the i.LINK cable (DV cable). When you connect with a device that has two or more i.LINK connectors, refer to the operating instructions supplied with the connected device. About data transfer speed of i.LINK i.LINK defines maximum data transfer speeds of approximately 100, 200 and 400 Mbps 1) that are referred to as S100, S200 and S...