• When you are not going to use the Unit for a long period of time, disconnect the power cord. E - 15 ADJUSTING THE SOUND To adjust the surround sound balance while Dolby Digital and Pro Logic II decoding is in effect Use the remote control to make the following changes to speaker balance: Front speaker (left) • Press the SOUND button repeatedly to display , then press the or CURSOR button to adjust the sound level. It will show on the display of the Unit. Front speaker (right) • Press the SOUND

For Your Reference: • You can use the viewer rating lock ONLY with DVD video discs featured with the rating lock function. ! Some discs may not be encoded with specific rating level information though its disc jacket says that is for “adults”. For those discs, the rating lock will not function. CUSTOM SETUP- continued Rating [DVD] You can set on the rating lock to a specific rating so that the DVD video discs rated higher than the rating you selected cannot play unless the correct password is en

Language barriers broken down by sound tracks in as many as eight languages, plus subtitles - if available on disc - in as many as 32. And whether you watch DVD-Video on wide- screen or regular TV, you always see it the way it was meant to be. Manufactured under license from Dolby Labaratories. “Dolby” and the double-D symbol are trademarks of Dolby Labaratories. Confidential Unpublished Works. ©1992-1999 Dolby Labaratories Inc. All rights reserved. DIGITAL VIDEO DVD-Video uses state-of-the-art

“Dolby” and the double-D symbol are trademarks of Dolby Laboratories. Confidential Unpublished works. ©1992-1997 Dolby Laboratories, Inc. All rights reserved. 2 IB-DVD2003-COMPUSA-E-061202 CONNECTIONS Choose Your Connection There are several ways to connect your DVD player. Please use the following chart to determine which connection is best for you. Turn to the appropriate page and connect your DVD player. COMPONENTS CABLES NEEDED GO TO ... Í (j • Audio/Video (included) • Coaxial (op

3. Press the PLAY button to resume normal playback. Still Picture and Frame Advance 1. Press the PAUSE II button during playback. This will freeze the picture on your TV. 2. If the picture vibrates vertically during still mode, use the CH +/-buttons to adjust for minimum distortion. If noise bars appear on the screen during still mode, set your VCR to the slow mode and press the CH +/-buttons to make the noise disappear. Then press the PAUSE II button again. 3. Press the PAUSE II button during s

Primare Systems AB Renvagen 1 SE-352 45 Vaxjo Sweden Issue: DVD26 The information in this guide is believed to be correct as of the date of publication. However, our policy is one of continuous development and so the information is subject to change without notice, and does not represent a commit ment on the part of Primare Systems AB. Primare is a trademark of Primare Systems AB. Man u fac tured under license from Dolby Laboratories Dolby, Pro Logic, and the double-D symbol are trademarks of Do

INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION. WARNING: DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE, DUE TO THE HIGH RISK OF FIRE OR ELECTRIC SHOCK.AND DO NOT OPEN THE CABINET FOR DANGEROUS HIGH VOLTAGES ARE PRESENT INSIDE THE ENCLOSURE. ONLY QUALIFIED SERVICE PERSONNEL SHOULD ATTEMPT THIS. CAUTION: DURING PLAYBACK, THE DISC SPINS AT HIGH SPEED, SO DO NOT LIFT OR MOVE THE PLAYER, DOING SO MAY DAMAGE THE DISC. CAUTION:This Digital Video Disc Player employs a Laser System. Make

Press --Turn left OSD display ,press it again to resume normal. Press --Turn right OSD display ,press it again to resume normal. Press the PLAY to continue slideshow transitions. Press the REW or FF to see the previous or next picture. -29 Kodak Picture CD Playback Advanced Features Zoom Function: Note: During the ZOOM function, slideshow transitions and image rotation are disabled. Q off: close zoom, pressPLAY Q1, Q2, Q3: zoom in; Q4, Q5: zoom out again to resume slideshow transition mode. This

4.Start playback Press ENTER/PLAY to enjoy the pictures or songs. The pictures will be displayed in a style of a slideshow, there are many styles of transition effects such as Wipe Top (default mode), Wipe Bottom, Wipe Left, Wipe Right, Diagonal Wipe Left Top, Diagonal Wipe Right Top, Extend from Centre H, Compress to Centre H, Window H, etc. 5.Rotate an image (for KODAK PICTURE CD/JPEG) During the slide show, you can use arrow keys to rotate an image: a.Press Up/Down to mirror an image. b.Press

© 1992-1997 Dolby Laboratories Inc. All rights reserved. ® A Registered Trademark of Magnadyne Corporation LS5000DVD_UM.qxp 4/18/05 10:37 Page 2 LS5000DVD_UM.qxp 4/18/05 10:37 Page 2 INTRODUCTION Please take the time to read all of the information in this manu-WARNING! To prevent fire or electrical shock hazard, do not al. Familiarity with installation and operation procedures will expose this product to moisture, or remove cover or bottom help you obtain the best possible performance from your