Assessments - 5, GPA: 4.4
(
)
)
|
por este dispositivo também tem outras instruções :
Facilidade de uso
(When the replaced “Memory Stick Duo” contains a file with a number higher than the last assigned number, a number one higher than the largest number is assigned.) Reset Starts from 0001 each time the folder is changed. (When the recording folder contains a file, a number one higher than the largest number is assigned.) USB Connect Selects the USB mode to be used when connecting the camera to a computer or a PictBridge compliant printer using the USB cable. PictBridge Connects the camera to a PictBridge compliant printer (page 65). PTP When [PTP] (Picture Transfer Protocol) is set and the camera is connected to a computer, the images in the recording folder on the camera are copied to the computer. (Compatible with Windows XP and Mac OS X.) Mass Storage Establishes a Mass Storage connection between the camera and a computer or other USB device (page 52). 46 For details on the operation 1 page 39 Video Out Sets the video signal output according to the TV color system of the connected video equipment. Different countries and regions use different TV color systems. If you want to view images on a TV screen, check page 71 for the TV color system of the country or region where the camera is used. NTSC Sets the video output signal to NTSC mode (e.g., for the USA, Japan). PAL Sets the video output signal to PAL mode (e.g., for Europe). Clock Set Sets the date and time. OK Select [OK] with ▲ on the control button, and press •. Then, perform the procedure explained in “Set the clock.” *0 Cancel Cancels setting the clock. 47 Using the Setup screen 1Л Using your computer Enjoying your Windows computer I Recommended computer environment The following environment is recommended for a computer connected to the camera. Recommended environment for copying images OS (pre-installed): Microsoft Windows 2000 Professional, Windows Millennium Edition, Windows XP Home Edition or Windows XP Professional • Operation is not assured in an environment based on an upgrade of the operating systems described above or in a multi-boot environment. USB jack: Provided as standard Recommended environment for using “Cyber-shot Viewer” OS (pre-installed): Microsoft Windows 2000 Professional, Windows Millennium Edition, Windows XP Home Edition or Windows XP Professional Sound card: 16-bit stereo sound card with speakers Processor/Memory: Pentium III 500 MHz or faster, 128 MB of RAM or more (Recommended: Pentium III 800 MHz or faster and 256 MB of RAM or more) Software: DirectX 9.0c or later Hard Disk: Disk space required for installation—200 MB or more Display: Screen resolution; 800 x 600 dots or more Colors; High Color (16-bit color) or more • This software is compatible with DirectX technology. “DirectX” must be installed for use. Notes on connecting your camera to a computer • Operations are not guaranteed for all the recommended computer environments mentioned above. • If you connect two or more USB devices to a single computer at the same time, some devices, including your camera, may not operate, depending on the types of USB devices you are using. • Operations are not guaranteed when using a USB hub. • There are two modes for a USB connection when connecting a computer, [Mass Storage] (default setting) and [PTP] modes. This section describes [Mass Storage] as an examples. For details on [PTP], see page 46. • When your computer resumes from a suspend or sleep mode, communication between your camera and your computer may not recover at the same time. 49 Using your computer I Installing the software (supplied) You can install the software (supplied) using the following procedure. • When using Windows 2000/Me, do not connect the camera to the computer before installation. • In Windows 2000/XP, log on as Administrator. Turn on your computer, and insert the CD-ROM (supplied) into the CD-ROM drive. The installation menu screen appears. 4 Follow the instructions on the screen to complete the installation. • When the restarting confirmation message appears, restart the computer following the instructions on the screen. • “DirectX” will be installed if you have not yet installed them. 5 Remove the CD-ROM after the installation is complete. 1 • If it does not appear, double-click Q (My Computer) -► ig) (CYBERSHOTSOFT). 2 Click [Install]. The “Choose Setup Language” screen appears. 3 Select the desired language, then click [Next]. The “License Agreement” screen appears. Read the agreement carefully. If you accept the terms of the agreement, click the radio button next to [I accept the terms of the license agreement] and then click [Next]. 50 Copying images to your computer ■ This section describes the process using a Windows computer as an example. You can copy images from the camera to your computer as follows. For a computer with a Memory Stick slot Remove the “Memory Stick Duo” from the camera and insert it in the Memory Stick Duo Adaptor. Insert the Memory Stick Duo Adapt...