Assessments - 3, GPA: 4
(
)
)
|
por este dispositivo também tem outras instruções :
Facilidade de uso
• Camera (1) • Battery charger BC-VW1 (1) • Power cord (mains lead) (1) (not supplied in the U.S.A. and Canada) • Rechargeable battery pack NP-FW50 (1) • USB cable (1) • Shoulder strap (1) • Eyepiece cup (1) • Body cap (1) (attached to the camera) • Accessory shoe cap (1) (attached to the camera) • Cleaning Cloth (1) • CD-ROM (1) – Application Software for . camera – . Handbook • Instruction Manual (Getting Started: This manual) (1) • Instruction Manual (Operations) (1) NEX-7K only • E18 – 55 mm zoom lens (1)/Front lens cap (1)/Rear lens cap (1) (The caps are attached to the lens.) • Lens hood (1) Attaching the shoulder strap is recommended not to drop the camera. Charging the battery pack When using the camera for the first time, be sure to charge the NP-FW50 “InfoLITHIUM” battery pack (supplied). The “InfoLITHIUM” battery pack can be charged even when it has not been fully depleted. It can also be used when it has not been fully charged. • The charging time differs depending on the remaining capacity of the battery pack or charging conditions. The above charging time is when charging a fully depleted battery pack at a temperature of 25 °C (77 °F). • We recommend charging the battery pack in an ambient temperature of between 10 °C and 30 °C (50 °F and 86 °F) to efficiently charge the battery pack. • Connect the battery charger to the nearest wall outlet (wall socket). • A charged battery discharges little by little even though you do not use your camera. Charge the battery before using the camera to avoid missing an opportunity to shoot. Inserting the charged battery pack x Removing the battery pack Inserting a memory card (sold separately) xMemory cards that you can use You can use following types of memory cards with this camera. However, proper operation cannot be guaranteed for all types of the memory cards. You cannot use MultiMediaCard. x Removing the memory card Open the cover, make sure that the access lamp is not lit, and push the memory card once. • When the access lamp is lit, do not remove the memory card or the battery pack, or turn off the power. The data may be corrupted. Attaching/removing the lens Set the power switch of the camera to OFF before you attach or remove the lens. • When attaching a lens, do not press the lens release button. • Do not use force when attaching a lens. • The Mount Adaptor (sold separately) is required to use an A-mount lens (sold separately). For details, refer to the operating manual supplied with the Mount Adaptor. x Removing the lens • When changing the lens, if dust or debris gets inside the camera and adheres to the surface of the image sensor (the part that acts as the film), it may appear as dark spots on the image, depending on the shooting environment. The camera vibrates slightly when it is turned off, due to the anti-dust function, to prevent dust from adhering to the image sensor. However, attach or remove the lens quickly somewhere away from dusty locations. Setting up the date When you turn on the camera for the first time, the screen to set date and time appears. Adjusting the viewfinder (diopter adjustment) Adjust the viewfinder so that you can see the screen displays clearly. Attaching/removing the eyepiece cup It is recommended that you attach the eyepiece cup when you intend to use the viewfinder. • Remove the eyepiece cup when you attach an accessory (sold separately) to the accessory shoe. Installing the software To utilize images recorded with the camera, the following software is provided: • “Image Data Converter” You can edit RAW images, etc. • “PMB” (Picture Motion Browser) (Windows only) You can import images to the computer, edit them, such as displaying them on a calender. • If “PMB” has already been installed on the computer, and the version number of the previously installed “PMB” is lower than that of the “PMB” on the CD-ROM (supplied), install “PMB” also from the CD-ROM (supplied). x Windows The following computer environment is recommended when using the supplied software and importing images via a USB connection. * 64-bit editions and Starter (Edition) are not supported. Windows Image Mastering API (IMAPI) Ver. 2.0 or later is required to use the function for creating discs. ** Starter (Edition) is not supported. x Macintosh The following computer environment is recommended when using the supplied software and importing images via a USB connection. Precautions The Cleaning Cloth Remove large specks of dirt from the Cleaning Cloth before using it. On the functions available with the camera You may feel uncomfortable symptoms such as eyestrain, nausea, or a tired feeling while watching 3D images recorded with the camera on 3D compatible monitors. When you watch 3D images, we recommend that you take a break at regular time intervals. Since the need for or frequency of break times varies between individuals, please set your own standards. If you feel sick, stop watching 3D images, and consult a doctor as needed. Also, refer to the op...
Este manual também é adequado para os modelos :Câmaras - NEX-7K (1006.01 kb)