Assessments - 3, GPA: 2.3 ( )

Fabricante : Canon Arquivo Tamanho: 789.57 kb Arquivo Nome : Língua de Ensino:

por este dispositivo também tem outras instruções :

Câmaras - PowerShot SX500 IS (13.22 mb)

Câmaras de vídeo - PowerShot SX500 IS (2.71 mb)

Câmaras de vídeo - PowerShot SX500 IS (1.37 mb)

Câmaras de vídeo - PowerShot SX500 IS (27.71 mb)

If it is unclear whether the card has been approved for use in the area, please check with the card manufacturer. Charging the Battery Remove the battery cover and insert the battery in the charger. 3-1 zzAfter aligning the o marks on the battery and charger, insert the battery by pushing it in ( ) and down ( ). Charge the battery. 3-2 zzBattery chargers with a plug: Flip out the plug and plug the charger into a power outlet. The lamp turns orange. zzBattery chargers with a power cord: Connect the power cord to the battery charger, and then plug the other end into a power outlet. zzWhen charging is finished, the lamp turns green. Remove the battery. Inserting the Battery and Memory Card Open the cover. 4-1 zzSlide the cover ( ) and open it ( ). Insert the battery. 4-2 zzHolding the battery with the terminals ( ) facing as shown, move the battery lock in the direction of the arrow, insert the battery, and push it in all the way until the lock clicks shut. zzTo remove the battery, press the battery lock in the direction of the arrow. Check the card's write-protect tab and insert the memory card. 4-3 zzShooting is not possible with cards that have a write-protect tab ( ) in the locked position. Slide the tab up until it clicks into the unlocked position. zzInsert the memory card with the label ( ) facing as shown until the lock clicks shut. zzTo remove the memory card, push it in until you feel a click, and then slowly release it. Close the cover. 4-4 zzLower the cover ( ) and hold it down as you slide it, until it clicks into the closed position ( ). 1 2 3-1 3-2 CB-2LY CB-2LYE 4-1 4-2 4-3 4-4 5-1 5-2 5-3 6-1 6-2 7-1 7-2 7-3 7-4 8-1 8-2 8-3 Setting the Date and Time Turn the camera on. 5-1 zzPress the power button to turn the camera on. The [Date/ Time] screen is displayed. Set the date and time. 5-2 zzPress the buttons to choose an option, and then adjust the setting, either by pressing the

buttons or turning the <5> dial. zzWhen finished, press the button. Specify your home time zone. 5-3 zzPress the buttons or turn the <5> dial to choose your home time zone. zzPress the button when finished. After a confirmation message, the setting screen is no longer displayed. Change the date and time. 1 Press the button. 2 Move the zoom lever to choose the [3] tab. 3 Press the

buttons or turn the <5> dial to choose [Date/ Time], and then press the button. 4 Follow step 5-2 to configure the setting, and then press the button. Display Language Enter Playback mode. 6-1 zzPress the <1> button. Access the setting screen. 6-2 zzPress and hold the button, and then immediately press the button. zzPress the

buttons or turn the <5> dial to choose a language, and then press the button. Shooting Turn the camera on and enter mode. 7-1 zzPress the power button and set the mode dial to . Compose the shot. 7-2 zzTo zoom in and enlarge the subject, move the zoom lever toward (telephoto) as you watch the screen, and to zoom away from the subject, move it toward (wide angle). Shoot still images. 7-3 zzPress the shutter button lightly ( ). zzThe camera beeps twice after focusing, and AF frames are displayed to indicate image areas in focus. Press the shutter button all the way down ( ). Shoot movies. 7-4 zzPress the movie button to start shooting, and press it again to stop. Viewing Enter Playback mode. 8-1 zzPress the <1> button. Browse through your images. 8-2 zzTo view the previous or next image, press the buttons or turn the <5> dial. zzMovies are identified by a [ ] icon. To play movies, go to step 8-3. Play movies. 8-3 zzPress the button to access the movie control panel, choose [ ] (either press the buttons or turn the <5> dial), and then press the button again. zzMovie playback begins, and you can adjust the volume as needed by pressing the

buttons. zzAfter the movie is finished, [ ] is displayed. Erase the images. 1 Press the button. 2 After [Erase?] is displayed, press the buttons or turn the <5> dial to choose [Erase], and then press the button. Enggliisshh PPrreelliimmiinnaarryy NNootteess aanndd LLeeggaall IInnffoorrmmaattiioonn Safety Precautions • Before using the product, please ensure that you read the safety precautions described below. Always ensure that the product is used correctly. • The safety precautions noted on the following pages are intended to prevent injuries to yourselfand other persons, or damage to the equipment. Warning Denotes the possibility of serious injury or death. • Do not trigger the flash in close proximity to people's eyes. Exposure to the intense light produced by the flash could damage eyesight. In particular, remain at least 1 meter (39 inches) away from infants when using the flash. • Store this equipment out of the reach of children and infants. Strap: Putting the strap around a child's neck could result in asphyxiation. Date/time battery (if removable): Dangero...

Baixe o seu

Para fazer o download, introduza 2 dígitos :