Assessments - 4, GPA: 3.5
(
)
)
|
Facilidade de uso
date DPOF Settings File Name, number of copies, 183 PRINTING IMAGES To configure print settings for a single image 1. In the PLAY mode, press [MENU]. 2. Select the “PLAY” tab, select “DPOF”, and then press []. 3. Use [] and [] to select “Select images”, and then press []. 4. Use [] and [] to display the image you want. 5. Use [] and [] to specify the number of copies. • You can specify up to 99 for the number of copies. Specify 00 if you do not want to have the image printed. 6. To turn on date stamping for the prints, press [DISP] so “On” is displayed. •“On”indicates that date stamping is turned on. • To turn off date stamping for the prints, press [DISP] so “Off”is displayed. • Repeat steps 4 through 6 if you want to configure other images for printing. 7. After all the settings are the way you want, press [SET] to apply them. 184 PRINTING IMAGES To configure print settings for all images 1. In the PLAY mode, press [MENU]. 2. Select the “PLAY” tab, select “DPOF”, and then press []. 3. Use [] and [] to select “All images”, and then press []. 4. Use [] and [] to specify the number of copies. • You can specify up to 99 for the number of copies. Specify 00 if you do not want to have the image printed. 5. To turn on date stamping for the prints, press [DISP] so “On” is displayed. •“On”indicates that date stamping is turned on. • To turn off date stamping for the prints, press [DISP] so “Off”is displayed. 6. After all the settings are the way you want, press [SET] to apply them. 185 PRINTING IMAGES IMPORTANT! • DPOF settings are not cleared automatically after printing is complete. This means that if you perform another printing operation without clearing DPOF settings, printing will be performed in accordance with the last settings you configured. If you want to prevent this from happening, perform the procedure under “To configure print settings for all images” (page 185) and change the number of copies to “00”. After that, you can configure new DPOF settings as required. • If you take a memory card to a professional print service, be sure to tell them that it includes DPOF settings for the images to be printed and the number of copies. If you don’t, the printing service may print all images without regard to your DPOF settings, or date printing may not be performed. • Note that some professional print services do not support DPOF printing. Check with your service before ordering prints. • Some printers may have settings that disable date stamp and/or DPOF printing. See the user documentation that comes with your printer for details about how to enable these features. Using PictBridge or USB DIRECT-PRINT You can connect the camera directly to a printer that supports PictBridge or USB DIRECT-PRINT, and perform image selection and printing using the camera monitor screen and controls. DPOF support (page 183) also lets you specify which images you want to print and how many copies of each should be printed. • PictBridge is a standard established by the Camera and Imaging Products Association (CIPA). • USB DIRECT-PRINT is a standard proposed by Seiko Epson Corporation. 186 PRINTING IMAGES 1. Press [MENU]. 2. Select the “Set Up” tab, select “USB”, and then press []. 3. Use [] and [] to select the setting you want, and then press [SET]. When connecting to this type of device: Select this setting: Computer or USB DIRECTPRINT- compatible printer Mass Storage (USB DIRECT-PRINT) PictBridge-compatible printer PTP (PictBridge) • Mass Storage (USB DIRECT-PRINT) causes the camera to see the computer as an external storage device. Use this setting for normal transfer of images from the camera to a computer (using the bundled Photo Loader application). • PTP (PictBridge) simplifies the transfer of image data to the connected device. 4. Check the battery level indicator to make sure that the batteries are fully charged, and then press the power button to turn off the camera. • If battery power is low, replace the batteries or switch to AC power. • To power the camera using AC power, you need to purchase an optionally available AC adaptor. • The camera does not draw power over the USB cable. 187 PRINTING IMAGES 5. Use the USB cable that comes with the camera to connect the camera to a printer. USB •Take care when connecting the USB cable to the camera or your computer. USB ports and cable plugs are shaped for proper positioning. •Plug the USB cable plugs into the ports securely, as far as they will go. Proper operation is not possible if connections are not correct. 6. Turn on the printer. 7. Load paper for printing the images into the printer. 8. Press the camera’s power button. • This displays the print menu on the camera’s monitor screen. 9. Use [] and [] to select “Paper Size”, and then press []. 188 PRINTING IMAGES 10.Use [] and [] to select the paper size you want to use for printing, and then press [SET]. • The following are the print sizes that are available. 3.5. . 5. 5. . 7. 4. . 6. A4 8.5. . 11. By Printer • Select...