Assessments - 2, GPA: 4.5
(
)
)
|
por este dispositivo também tem outras instruções :
Facilidade de uso
You cannot do any further shooting during the reduction. • Set the flash mode to (Fill-flash) when you shoot with the flash (page 75). However, when using the flash, if you close the aperture (a larger F-number) by making the shutter speed slower, the light of the flash will not reach distant subjects. This mode is suitable for zShooting with the desired exposure setting by adjusting both the shutter speed and aperture. 1 Set the mode dial to M. Shooting images 2 Rotate the control dial to adjust the shutter speed, and while pressing the button, rotate the control dial to adjust the aperture. • You can select the item the control dial adjusts (shutter speed or aperture) with [Ctrl dial setup] (page 113). button Shutter speed Aperture (F-number) 65 3 Shoot the image after the exposure is set. 3 Shoot the image after the exposure is set. Toward +: Images become brighter. Toward –: Images become darker. : Metered Manual Exposure value Notes • The (Camera shake warning) indicator is not indicated in manual exposure mode. • When the mode dial is set to M, the ISO setting [AUTO] is set to [100]. In M mode, the ISO setting [AUTO] is not available. Set the ISO sensitivity as necessary (page 82). • Set the flash mode to (Fill-flash) when you shoot with the flash (page 75). However, the flash range differs according to the aperture value. When you shoot with the flash, check the flash range (page 77). The EV scale in M mode You can confirm the exposure value on LCD monitor (Standard Display) the EV scale on the Standard Display or on the screen of the viewfinder. The bB arrow appears if the set exposure is Standard value beyond the range of the EV scale. The arrow starts flashing if the difference becomes Viewfinder greater. Standard value This mode is suitable for zShooting trails of light, such as fireworks. zShooting trails of stars. 1 Set the mode dial to M. 2 Rotate the control dial to the left until [BULB] is indicated. BULB 3 While pressing the button, rotate the control dial to adjust the aperture (F-number). button Shooting images 67 4 Press the shutter button halfway down to adjust the focus. 4 Press the shutter button halfway down to adjust the focus. As long as the shutter button is pressed, the shutter remains open. Shooting techniques • Use a tripod. • Set the focus to infinity in manual focus mode when shooting fireworks, etc. • Use the wireless Remote Commander (sold separately) (page 93). Pressing the SHUTTER button on the Remote Commander triggers BULB shooting and pressing it again stops BULB shooting. You do not need to press and hold the SHUTTER button on the Remote Commander. Notes • When using a tripod, turn off the SteadyShot function (page 46). • The longer the exposure time, the more conspicuous the noise on the image. • After shooting, noise reduction (Long exp.NR) will be done for the same amount of time that the shutter was open. You cannot do any further shooting during the reduction. Selecting the focus method Selecting the focus method The type of lens The switch to be used To switch to auto focus To switch to manual focus The lens is equipped with a focus mode switch Lens (Always set the focus mode switch on the camera to AF.) Set the focus mode switch on the lens to AF. Set the focus mode switch on the lens to MF. The lens is not equipped with a focus mode switch Camera Set the focus mode switch on the camera to AF. Set the focus mode switch on the camera to MF. Using autofocus 1 Set the focus mode switch on the camera to AF. 2 When the lens is equipped with the focus mode switch, set it to AF. 3 Look into the viewfinder. The subject inside the focus area comes into focus automatically (Eye-Start AF). Using the function 69 4 Press the shutter button halfway Focus area sensor 4 Press the shutter button halfway Focus area sensor • When the focus is confirmed, the focus indicator changes to z or (below). • The sensor used for focusing in the AF area illuminated in red (page 73). Focus indicator Focus area Shooting technique • To select the area used for focusing, set up [AF area] (page 73). Focus indicator Focus indicator Status z lit Focus locked. Ready to shoot. lit Focus is confirmed. Focal point moves following a moving subject. Ready to shoot. lit Still focusing. You cannot release the shutter. z flashing Cannot focus. The shutter is locked. Subjects that may require special focusing Using the autofocus, it is hard to focus on the following subjects. In such cases, use the focus lock shooting feature (page 71) or manual focus (page 74). • A subject that is low in contrast, such as blue sky or a white wall. • Two subjects at different distances overlapping in the AF area. • A subject that is composed of repeating patterns, such as the facade of a building. • A subject that is very bright or glittering, such as the sun, the body of an automobile, or the surface of water. • Ambient light is not sufficient. To measure the exact distance to the subject To measure the exact distance to t...
Este manual também é adequado para os modelos :Câmaras - DSLR-A230H (5.6 mb)
Câmaras - DSLR-A230L (5.6 mb)
Câmaras - DSLR-A230Y (5.6 mb)