Assessments - 2, GPA: 3.5
(
)
)
|
Facilidade de uso
770-7212J I CONTENTS OF HARDWARE PACK/LOOSE PARTS IN CARTON в- cf K-ÎÎ N—f ffÎÎÎff i °рц§ 0 (May Be Assembled) Q--ÎÎÎÎÎÎTÎ11 R- CONTENTS OF HARDWARE PACK (See figure 1): (Hardware pack may contain extra items which are not used on your unit.) Group A—Discharge Chute Tube Assembly FIGURE 1.—Contents of Hardware Pack A (5) Hex Bolts 1/4-20 x 5/8" Long В (3) Spring Washers 1/4" I.D. С (5) Hex Lock Nuts 1/4-20 Thread D (2) Retainer Clips E (3) Retainer Straps Group B—Grass Collector Cover Assembly F (2) Shoulder Bolts 3/8-16 Thread G (2) Belleville Washers 1/2" I.D. H (2) Lock Washers 3/8" I.D. I (2) Hex Nuts 3/8-16 Thread Group С—Latch Support Bracket К (2) Hex Bolts 5/16-18 x 3/4" Long L (2) Lock Washers 5/16" I.D. M (2) Hex Nuts 5/16-18 Thread N (8) Hex Bolts 1/4-20 x 5/8" Long 0 (8) Lock Washers 1/4" I.D. P (8) Hex Nuts 1/4-20 Thread Group D—Grass Catcher Frame and Bag Q (10) Truss Machine Screws #10-24 x 1/2" Long R (10) Hex Sems Nuts #10-24 Thread S (8) Hex Bolts 1/4-28 x 7/8" Long T (8) Lock Washers 1/4" I.D. u (8) Hex Nuts 1/4-28 Thread FIGURE 2.—Loose Parts in Carton 2 ASSEMBLY INSTRUCTIONS N A WARNING: When mounting the 063 Grass Collector on a 600 series lawn tractor with a 36" or 38" deck built prior to 1990, wheel weights must be installed for stability before the lawn tractor is operated. Order part number 753-0476. IMPORTANT: For 600 series lawn tractors with a 38" “deep” deck (Model 805) produced prior to 1987, replace the right hand blade on the deck with a 3” wide high lift blade (part number 742-0473A) for proper operation of the grass collector. Grass Catcher Frame FIGURE 3. Hex Bolt (S) NOTE: Reference to right or left hand side of the unit is observed from the driver’s seat, facing forward. ASSEMBLY OF GRASS CATCHER FRAME AND BAG (if Unassembled—Group D) 1. Feed frame into the channel on the fabric portion -of the grass catcher bag as shown in figure 3. The plastic portion of bag goes toward the open end of frame. 2. Attach one frame hanger bracket to the bag and — frame as follows. See figure 4. a. Place the ends of the frame inside the bag, with the grommets in the bag lined up with the holes in the frame. b. The frame hanger bracket goes outside of the bag and the frame. The flange with the slots is the top of the hanger bracket. Working on one side, line up the holes in the frame and bag with the holes in frame hanger bracket. Secure hex bolts (S), lock washers (T) and hex nuts (U), finger tight only. The head of the bolts go to the outside of the bag. c. Secure the other side of the frame, bag and frame hanger bracket in the same manner. d. Tighten all four nuts and bolts securely. Hex Sems - Nut (R) Screw (Q) FIGURE 5. 3. Attach the front of grass bag to the hanger bracket with five truss machine screws (Q) and hex sems nuts (R). The heads of the screws go on — the inside of the bag as shown in figure 5. 4. Assemble the second bag and frame by repeating steps 1 through 3. 3 ASSEMBLY OF DISCHARGE CHUTE TUBE (Group A) 1. Attach the retainer clips (D) to the bottom of the -lower tube as shown in figure 6. Secure with hex bolts (A) and hex lock nuts (C). 2. Assemble two retainer straps (E) to the upper end of the discharge chute as shown in figure 7. Secure with hex bolts (A), spring washers (B) and hex lock nuts (C). FIGURE 6. Retainer Strap (E) Hex Lock Nut (C) Hole for 36" & 38" Decks Hex Bolt (A) Retainer Stra| > (E) Hex Lock Nut (C) Sp ring Waslier (B) Hole for 32", 42" & 46" Dec Este manual também é adequado para os modelos :
Gazonouborschiki - 190-103-000 (834.42 kb)