Assessments - 4, GPA: 3.5 ( )

Fabricante : Agri-Fab Arquivo Tamanho: 2.32 mb Arquivo Nome : 501887,551887,190-217D-100.pdf Língua de Ensino:

Do not operate on slopes in excess of 10 degrees. STAY OFF STEEP SLOPES. • Follow the maintenance instructions outlined in this manual. Look for this symbol to point out important safety precautions. It means — Attention!! Become alert!! Your safety is involved. DANGER: This Mow-N-Vac was built to be operated according to the rules for safe operation in this manual. As with any type of power equipment, carelessness or error on the part of the operator can result in serious injury. This unit is capable of amputating fingers and hands and throwing objects. Failure to observe the following safety instructions could result in serious injury or death. WARNING to avoid serious injury • Read Owner's Manual and all safety labels on machine before starting and using machine. • Do Not remove top cover or attempt to empty contents of cart while engine is running. • Do Not stand behind cart in exhaust discharge area while engine is running. • Keep hands, feet, face, long hair and clothing out of chipper inlet, vac inlet, and discharge area. There are ROTATING BLADES inside these openings. • Wear approved safety glasses and gloves. Avoid loose fitting clothes. • Keep the area of operation clear of all persons, particularly small children and pets. • Keep all shields and guards (e.g. upper chipper chute extension, discharge chute, nozzle assembly) in place and securely attached. • Check discharge boot frequently for wear. Replace if worn or damaged. • If unit becomes clogged or jammed, shut off engine right away. Do Not attempt to clear clog or jam with engine running. • Muffler and engine get hot and can cause burns. Do Not Touch. To avoid a fire hazard, keep leaves, grass and other combustible debris off hot muffler and engine. • Do Not attempt to remove or attach vac nozzle or optional Hose Kit with engine running. • Do Not operate unit unless nozzle or optional Hose Kit is secured in place. • Do Not fill gas tank while engine is running. Allow engine to cool at least 2 minutes before refueling. DANGER DANGER HAZARDOUS ROTATING BLADES INSIDE. KEEP HANDS AWAY FROM ALL OPENINGS. DO NOT REMOVE OR ATTACH HOSE, HOSE ADAPTER, ELBOW OR OPTIONAL HOSE KIT WHEN ENGINE IS RUNNING! MUFFLER ANDADJACENT AREASMAY EXCEED 150 F777-5863 HARDWARE PACKAGE CONTENTS KHPNLIJGFEDCBASRTUVWXYZAAQSHOWN FULL SIZEONOT SHOWN FULL SIZEBBCCEEDDM See page 13 for contents of Deck Adapter hardware package. (Contents not included here.) ref. qty. description Cart Vac A 3 — Bolt, Hex 3/8" x 3" B — 1 Bolt, Hex 1/2" x 1-1/4" C 2 — Bolt, Hex 3/8" x 1-1/4" D — 5 Bolt, Hex 1/4" x 1-1/4" E — 2 Bolt, Hex 1/4" x 1" F — 6 Bolt, Hex 5/16" x 3/4" G — 14 Bolt, Hex 1/4" x 3/4" H 9 20 Bolt, Hex 1/4" x 5/8" I — 4 Bolt, Hex 5/16" x 3/4" Thread Forming J 12 — Bolt, Truss Head 5/16" x 3/4" K 2 36 Washer, Flat 1/4" L — 6 Washer, Nylon M — 4 Washer, Flat 5/16" N — 1 Washer, Flat 7/16" O 4 — Washer, Flat 1" P 9 40 Nylock Hex Nut, 1/4" ref. qty. description Cart Vac Q 12 6 Nylock Hex Nut, 5/16" R 5 — Nylock Hex Nut, 3/8" S — 1 Nylock Hex Nut, 1/2" T 1 — Pin, Hair Cotter 1/8" U 2 — Pin, Cotter 1/8" x 1-1/2" V 2 — Hub Cap W 2 — Spacer Tube X 2 — Door Support Y — 1 Hitch Plate Z — 3 Knob AA — 2 Door Latch BB 1 — Hitch Pin CC — 1 Tarp Strap, 25" DD — 4 Tarp Strap (Less Hooks) EE — 4 "S" Hooks 10 5 8 17 23469 CARTON CONTENTS (Cart Body Carton) ref. qty. description 1 1 Wheel Support 2 1 Rear Tongue 3 1 Front Tongue 4 1 Hose Hanger Rod 5 2 Cart Body ref. qty. description 6 1 Hose 7 1 Tailgate Reinforcement Bracket 8 1 Axle 9 1 Latch Stand Bracket 10 2 Wheels 3 1 2 4 7 5 98 10 6 11 12 CARTON CONTENTS (Mow-N-Vac Carton) ref. qty. description 1 1 Front Panel 2 2 Side Panels 3 1 Rear Door 4 1 Cross Brace 5 1 Poly Hard Top 6 1 Adapter Bracket 7 1 Hitch Bracket ref. qty. description 8 1 Elbow 9 1 Engine Base Assembly 10 1 Deck Adapter 11 2 Hose Clamp 12 1 Hose Adapter (Nozzle) ASSEMBLY This unit is shipped WITHOUT GASOLINE or OIL. After assembly, see separate engine manual for proper fuel and engine oil recommendations. 3. Fit the tailgate reinforcement bracket over the end of the cart bed. Position the two door support brackets on the bottom of the reinforcement bracket as shown in figure 2. Fasten the reinforcement bracket and the door supports to the bottom of the cart using four 5/16" x 3/4" truss head bolts and 5/16" Nylock hex nuts. Do not tighten yet. See figure 2. 4. Fasten the tailgate reinforcement bracket to the sides of the cart body using four 1/4" x 5/8" hex bolts and 1/4" Nylock hex nuts as shown in figure 2. Do not tighten yet. TOOLS REQUIRED FOR ASSEMBLY (1) Screwdriver (1) Pliers (2) 7/16" Wrenches (2) 1/2" Wrench (2) 9/16" Wrenches (2) 3/4" Wrenches (only if figure 22 on page 12 is used) 5/16" NYLOCKHEX NUT1/4" NYLOCK HEX NUT1/4" x 5/8" HEX BOLT5/16" x 3/4" TRUSSHEAD BOLTDOORSUPPORTTAILGATEREINFORCEMENTBRACKET REMOVAL OF PARTS FROM CARTONS 1. Remove the hardware packs and all loose parts from the cartons. 2. Lay out and identify parts shown in carton contents. 3. Lay o...

Baixe o seu

Para fazer o download, introduza 2 dígitos :