Log:
Assessments - 3, GPA: 4 ( )

Instruções de Operação Garmin, Modelo GPSMAP 6208

Fabricante : Garmin
Arquivo Tamanho: 4.88 mb
Arquivo Nome :
Língua de Ensino: en
Ir para baixar



por este dispositivo também tem outras instruções :

Facilidade de uso


Dangerous target has been lost. A red X indicates that the AIS transmission from the vessel has been lost, and the chartplotter displays a message banner asking whether the vessel should continue to be tracked. If you discontinue vessel tracking, the lost dangerous target symbol disappears from the chart or the 3D chart view. GPSMAP® 6000/7000 Series Owner’s Manual Charts and 3D Chart Views Heading and Projected Course of Activated AIS Targets When heading and course over ground information are provided by an activated AIS target, the heading of the target appears on a chart as a solid line attached to the AIS target symbol. A heading line does not appear on a 3D chart view. The projected course of an activated AIS target appears as a dashed line on a chart or a 3D chart view. The length of the projected course line is based on the value of the projected heading setting (page 17). If an an activated AIS target is not transmitting speed information, or if the vessel is not moving, a projected course line does not appear. Changes in the speed, course over ground, or rate of turn information transmitted by the vessel can impact the calculation of the projected course line. When course over ground, heading, and rate of turn information are provided by an activated AIS target, the projected course of the target is calculated based on the course over ground and the rate of turn information. The direction in which the target is turning, which is also based on the rate of turn information, is indicated by the direction of the barb at the end of the heading line. The length of the barb does not change. MMSI Heading Direction of turn Projected course Activated dangerous target Target with Course over Ground, Heading, and Rate of Turn When course over ground and heading information are provided by an activated AIS target, but rate of turn information is not provided, the projected course of the target is calculated based on the course over ground information. MMSI Heading Projected course Activated target Target with Course over Ground and Heading Turning Off AIS Reception AIS signal reception is turned on by default. From the Home screen, select Configure > other Vessels > AIS > off. All AIS functionality on all charts and on all 3D chart views is disabled. This includes AIS vessel targeting and tracking, collision alarms that result from AIS vessel targeting and tracking, and the display of information about AIS vessels. 6 GPSMAP® 6000/7000 Series Owner’s Manual Charts and 3D Chart Views Showing AIS and MARPA Vessels on a Chart or on a 3D Chart View AIS requires the use of an external AIS device and active transponder signals from other vessels. Mini Automatic Radar Plotting Aid (MARPA) functionality works with radar (page 77). You can configure how other vessels appear on a chart or on a 3D chart view. The display range and MARPA settings configured for one chart or one 3D chart view are applied only to that chart or to that 3D chart view. The details, projected heading, and trails settings configured for one chart or one 3D chart view are applied to all charts and to all 3D chart views. Note: The Fishing chart and Mariner’s Eye 3D are available with a preprogrammed BlueChart g2 Vision data card. 1. From the Home screen, select Charts. 2. Select Navigation Chart, Fishing Chart, Perspective 3D, or Mariner’s eye 3D. 3. Select Menu > other Vessels > Display Setup. 4. Complete an action: • Select Display Range to indicate the distance from your location in which AIS vessels appear. Select a distance. • Select MARPA > Show to show MARPA-tagged vessels. • Select Details > Show to show details about AIS-activated and MARPA-tagged vessels. • Select Proj. Heading to set the projected heading time for AIS-activated and MARPA-tagged vessels. For the GPSMAP 6000 series, use the Rocker or the Numeric Keypad to enter the time. For the GPSMAP 7000 series, use the on-screen keyboard. Select Done. • Select trails to show the tracks of AIS vessels. Select the length of the track that appears using a trail. Activating a Target for an AIS Vessel Note: The Fishing chart and Mariner’s Eye 3D are available with a preprogrammed BlueChart g2 Vision data card. 1. From the Home screen, select Charts. 2. Select Navigation Chart, Fishing Chart, Perspective 3D, or Mariner’s eye 3D. 3. Complete an action: • For the GPSMAP 6000 series, use the Rocker to select an AIS vessel. • For the GPSMAP 7000 series, touch an AIS vessel. 4. Select AIS Vessel > Activate target. Viewing Information about a Targeted AIS Vessel You can view the AIS signal status, MMSI, GPS speed, GPS heading, and other information that is reported about a targeted AIS vessel. 1. From the Home screen, select Charts. 2. Select Navigation Chart, Fishing Chart, Perspective 3D, or Mariner’s eye 3D. 3. Complete an action: • For the GPSMAP 6000 series, use the Rocker to select an AIS vessel. • For the GPSMAP 7000 series, touch an AIS vessel. 4. Select AIS Vessel. GPSMAP® 6000/7000 Serie...

Este manual também é adequado para os modelos :
navegadores GPS e receptores - GPSMAP 190-01120-00 (4.88 mb)
navegadores GPS e receptores - GPSMAP 6008 (4.88 mb)
navegadores GPS e receptores - GPSMAP 6012 (4.88 mb)
navegadores GPS e receptores - GPSMAP 6212 (4.88 mb)

Escreva a sua própria avaliação do dispositivo



Mensagem
Seu nome :
Introduza os dois dígitos :
capcha





categorias