Assessments - 4, GPA: 3.5 ( )

Fabricante : Garmin Arquivo Tamanho: 4.88 mb Arquivo Nome : Língua de Ensino:

From the Home screen, select Radar > Radar Setup > Front of Boat. 2. Select and hold Up or Down to adjust the offset. GPSMAP® 6000/7000 Series Owner’s Manual Radar Radar Overlay Display Appearance Adjusting Gain and Clutter on the Radar Overlay See “About Gain and Clutter” (page 85). Setting the Radar Overlay Display Orientation See “Changing the Map Orientation” (page 11). Setting Data Bars for the Radar Overlay See “Data Bar Settings” (page 91). Tracks and Waypoints Settings Showing Tracks on the Radar Overlay You can set whether vessel tracks appear on the Radar Overlay. From the Home screen, select Charts > Radar overlay > Menu > Waypoints & tracks > tracks > on. Managing Tracks See “Tracks” (page 39). Selecting a Waypoint Label Type You can select the type of labels shown with waypoints on the Radar Overlay. 1. From the Home screen, select Charts > Radar overlay > Menu > Waypoints & tracks > Waypoint Display > Display. 2. Complete an action: • Select Label to identify waypoints using labels. • Select Comment to show comments as waypoint labels. • Select Symbol to identify waypoints using symbols. Managing Waypoints See “Waypoints” (page 34). Alarms and Other Vessel Settings Setting the Safe-zone Collision Alarm See “Setting the Safe-zone Collision Alarm” (page 18). Viewing a List of AIS and MARPA Threats See “Viewing a List of AIS and MARPA Threats” (page 79). 6 GPSMAP® 6000/7000 Series Owner’s Manual Radar Showing Other Vessels on the Radar Overlay AIS requires the use of an external AIS device and active transponder signals from other vessels. You can configure how other vessels appear on the Radar Overlay. The display range setting configured for the Radar Overlay is applied only to the Radar Overlay. The details and projected heading settings configured for the Radar Overlay are also applied to all radar modes. 1. From the Home screen, select Charts > Radar overlay > Menu > other Vessels > Display Setup. 2. Complete an action: • Select Display Range to indicate the distance from your location in which AIS vessels appear. Select a distance. • Select Details > Show to show details about AIS-activated and MARPA-tagged vessels. • Select Proj. Heading to set the projected heading time for AIS-activated and MARPA-tagged vessels. For the GPSMAP 6000 series, use the Rocker or the Numeric Keypad to enter the heading. For the GPSMAP 7000 series, use the on-screen keyboard. Select Done. • Select trails to show the tracks of AIS vessels. Select the length of the track that appears using a trail. Radar Overlay Navigation Display Settings Changing the Map Zoom Detail You can adjust the amount of detail shown on the map, at different zoom levels, for the Radar Overlay. 1. From the Home screen, select Charts > Radar overlay > Menu > Setup > Chart Setup > Detail. 2. Select a level of detail. Showing an Inset Map while Panning You can control whether an inset map appears while panning the Radar Overlay. 1. From the Home screen, select Charts > Radar overlay > Menu > Setup > Chart Setup > Inset Map. 2. Complete an action: • Select on to show an inset map while panning. • Select Auto to show an inset map only when the position icon ( ) is no longer visible on the screen. Showing and Configuring the Heading Line The heading line is an extension drawn on the map from the bow of the boat in the direction of travel. You can configure the appearance of the heading line on the Radar Overlay. 1. From the Home screen, select Charts > Radar overlay > Menu > Setup > Chart Setup > Heading Line. GPSMAP® 6000/7000 Series Owner’s Manual 7 Radar 2. Complete an action: • Select Distance to set the distance to the end of the heading line. For the GPSMAP 6000 series, use the Rocker or the Numeric Keypad to enter the distance. For the GPSMAP 7000 series, use the on-screen keyboard. • Select time to set the amount of time until you reach the end of the heading line. For the GPSMAP 6000 series, use the Rocker or the Numeric Keypad to enter the time. For the GPSMAP 7000 series, use the on-screen keyboard. 3. Select Done. Showing and Configuring Spot Depth Soundings On the Radar Overlay, you can turn on spot soundings and set a dangerous depth. 1. From the Home screen, select Charts > Radar overlay > Menu > Setup > Chart Setup > Spot Depths > on. 2. Select Spot Depths > Dangerous. 3. Enter the dangerous depth: • For the GPSMAP 6000 series, use the Rocker or the Numeric Keypad. • For the GPSMAP 7000 series, use the on-screen keyboard. 4. Select Done. Showing and Configuring Navaid Symbols You can show and configure the appearance of navaid symbols on the Radar Overlay. 1. From the Home screen, select Charts > Radar overlay > Menu > Setup > Chart Setup > Symbols. 2. Complete an action: • Select Navaid Size to set the size of the navaid symbols shown on the map. Select a size. • Select Navaid type > NoAA to show the NOAA navaid symbol set on the map. • Select Navaid type > IALA to show the IALA navaid symbol set on the map. Showing Additional ...

Baixe o seu

Para fazer o download, introduza 2 dígitos :