Log:
Assessments - 4, GPA: 3.8 ( )

Instruções de Operação Cannon, Modelo 10265G

Fabricante : Cannon
Arquivo Tamanho: 151.86 kb
Arquivo Nome :
Língua de Ensino: en
Ir para baixar



Facilidade de uso


If desirable, they can be wiped with a cloth wrung out in hot soapy water followed by a clean damp cloth. FITTING/REPLACING THE BATTERY The battery is not covered by the guarantee. Use an alkaline AA battery. The battery holder is located in the plinth panel below the oven door. Open the oven door fully. Unscrew the knurled fixing screw anti - clockwise and remove. Withdraw the battery holder just enough to get access to the battery. Fit the new battery with the end marked “+” on the same side of the battery holder as the red lead. Replace the battery holder by placing it into the hole in the plinth and sliding to the left. Refit the screw. Battery Knurled Plinth Holder Screw CARE AND CLEANING COOKER FINISH CLEANING METHOD Vitreous Enamel Hotplate, burner caps, fascia, roasting dish, grill pan, oven base and rear, inside of grill compartment, inside of doors. Cloth wrung out in hot soapy water. Stubborn stains can be removed with a cream paste, liquid cleaner or by rubbing with fine steel wool soap pads. Check that the cleaning agent is approved by the Vitreous Enamel Development Council. Paint Side trims, plinth, fascia bottom trim, side panels. Lid & rear end caps (Oxford) Wash with a cloth wrung out in hot soapy water only. DO NOT USE ABRASIVES. Aluminium Hotplate burner bodies Similar to paint cleaning above. Use a nylon brush to remove any cleaning materials, water or dirt from the hotplate burner rings. Glass Oven/grill door fronts Lid (Oxford) As for enamel cleaning. Polish with a clean dry cloth or kitchen roll. Chromium Plating Oven shelves, grill pan grid, grill pan handle support Wipe with a cloth wrung out in hot soapy water. A fine steel wool soap pad e.g. Brillo, Ajax, or a chrome or stainless steel cleaner may be used. Plastic Grill pan handle, door handles, control knobs Wipe with a cloth wrung out in hot soapy water. Stubborn stains can be removed with a cream cleaner. Note: To ensure rapid lighting of the hotplate burners every time they are used, the ignitors must be kept clean and dry. Remove any food spillage or cleaning materials from the electrode using a small nylon brush such as a toothbrush. SOMETHING WRONG WITH YOUR COOKER Before calling a Service Engineer, please check through the following lists. THERE MAY BE NOTHING WRONG. Problem Check Slight odour or small amount of smoke when grill / oven used first time This is normal and should cease after a short period. Oven cooks too fast or too slow Check that the gas mark and shelf positions are as recommended in the Oven Cooking Charts. However, it may be necessary to increase or decrease the recommended setting slightly to suit your taste. Ignition does not work. Burner ports Ignitor Oven burner Grill burner If all burners fail to ignite: Check that sparks appear at the burners; a clicking noise should be heard. If not Check the battery, or fit a known good battery to the product. Batteries are not covered by the guarantee. The battery is easily changed - see the section on battery replacement. (An “AA” size alkaline battery should...

Este manual também é adequado para os modelos :
Fornos Elétricos - 10250G (151.86 kb)
Fornos Elétricos - 10251G (151.86 kb)
Fornos Elétricos - 10269G Mk2 (151.86 kb)
Fornos Elétricos - 10268G Mk2 (151.86 kb)

Escreva a sua própria avaliação do dispositivo



Mensagem
Seu nome :
Introduza os dois dígitos :
capcha





categorias