Assessments - 3, GPA: 3.3
(
)
)
|
Facilidade de uso
Pull firmly on the plug, DO NOT unplug by pulling on the cord. 16. Always unplug the unit before moving or cleaning, or whenever the heater is not in use. 17. Use only for intended household use as described in this manual. Any other use not recommended by the manufacturer may cause fire, electric shock, or injury to persons. The use of attachments not recommended or sold by unauthorized dealers may cause hazards. 18. Always use on a dry, level surface. 19. DO NOT use outdoors. 20. WARNING: To reduce the risk of fire or electric shock, DO NOT use this unit with any solid-state speed control device. 21. DO NOT attempt to repair or adjust any electrical or mechanical functions on this unit. Doing so will void your warranty. The inside of the unit contains no user serviceable parts. Qualified personnel should perform all servicing only. 22. CAUTION: Use supply wires suitable for 105.. 23. DO NOT locate against walls or behind drapes or furniture when it is free-standing used. 24. The heater is not to be used in wet or moist locations. 25. SAVE THESE INSTRUCTIONS. PRODUCT INFORMATION & SPECIFICATIONS Reflective heating technology replicates the sun’s healthy rays, directly warming the object or person in front of the heater. As the temperature of the heated surface rises, the warming effect is felt throughout the air and surrounding areas. Reflective heaters are great for open or large rooms, and actually save you energy by warming objects and not the entire room. Reflective heating is both safe and healthy– it produces no odors, chemicals, or fumes, and doesn’t stir up dust. As a safety feature, the heater’s exterior does not get as warm to reduce the risk of burns from anyone or anything touching the heater while in use. Remarkably efficient, our heater uses less power to create the same amount of heat as traditional heaters. Equipped with safety tip-over switch and overheat auto-off, our heater is safe and reliable. Voltage Rating 120 V (60Hz) Power Consumption 800W on High, 400W on Low Unit Size 10.8” W x 7.87” D x 21.3” H Unit Weight 4.15 lbs DISCLAIMER ALL INFORMATION AND THE TECHNICAL SPECIFICATIONS PRESENTED IN THIS USER’S MANUAL ARE THE PRESENTATION OF THE MANUFACTURER. SOLEUS INTERNATIONAL HAS NOT CONDUCTED INDEPENDENT TEST TO THE INFORMATION AND THE SPECIFICATIONS PRESENTED HEREWITHIN. SAFETY FEATURES Polarized Plug Warning: This heater is equipped with a polarized plug (one blade is wider than the other). The plug is intended to fit into a power outlet only one way, with the wide blade in the wide slot. This is a safety feature; if you are unable to insert the plug fully into the outlet, try reversing the plug. If the plug still does not fit, contact a qualified electrician. DO NOT DEFEAT THE SAFETY PURPOSE OF THE POLARIZED PLUG. Tip-Over Safety Switch This heater equipped with tip-over safety switch located underneath the base of the heater. This switch must be pressed inward for the heater to function properly. Some soft surfaces such as carpet may not be able to fully press in this switch. For some soft surfaces, a hard flat object will need to be placed underneath the heater for it to function properly. PLEASE DO NOT TAPE OR GLUE THIS SWITCH. SAFETY SWITCH BOTTOM OF THE HEATER PRODUCT DIAGRAM Operating Knob Carry Handle (on back) Reflective Halogen Tubes Base Tip-over Safety Switch (on bottom) ASSEMBLY Remove the heater body and base from box. Remove the packaging materials. 1. Lay the heater body on a level surface, and then unscrew the 2 butterfly screws from the bottom of the heater. 2. Pull the power cord through the hole at the center of the base, and align the base with the bottom of the heater. The power cord should fit through the slot in the base. 3. Attach the base to the heater body with the butterfly screws. OPERATING INSTRUCTIONS Place the heater on a firm, level surface and plug into a grounded 120V 60Hz power outlet. Turn the knob located on top to the desired setting: OPERATING THE HEATER: • LOW: Both reflective tubes operate, heating up to 400W. • HIGH: Both reflective tubes operate, heating up to 800W. • LOW SWING: The unit will oscillate 60° on low power mode. • HIGH SWING: The unit will oscillate 60° on high power mode. • OFF: Heater will stop operating. • Unplug the heater when not in use NOTE: A tip-over safety protection switch is installed at the bottom of the heater. When the heater is not placed horizontally, laid down or lifted up, it stops operating to ensure safety. After placing it upright the heater will resume operation. (See Page 4 for more information). NOTE: For safety, if the heater’s internal temperature rises above a certain point, the heater is designed to automatically shut off. To restart the heater in this situation: 1. Turn the Operating Knob to OFF. 2. Unplug the power cord from the outlet and allow the heater to cool for at least 10 minutes. 3. Plug the power cord back into the outlet. Turn the knobs located on top to select the desired setting. WARNI...
Este manual também é adequado para os modelos :Eléctrico - HR3-08-21 (701.17 kb)