Assessments - 4, GPA: 3.8 ( )

Fabricante : Jura Capresso Arquivo Tamanho: 514.79 kb Arquivo Nome : Língua de Ensino:

ADD TABLET (Fig. 9) / PRESS CLEANING UNIT CLEANING / PLEASE WAIT EMPTY TRAY PLEASE WAIT RINSE UNIT COFFEE READY The powder funnel for pre-ground coffee should be cleaned after each cleaning process. Remove it from the machine, rinse it with hot tap water and replace it after drying. 16. Decalcifying Your machine has an integrated decalcifying program. It lasts approx. 50 minutes. Jura de-scaling tablets which are specially designed for the de-scaling program of your IMPRESSA S90/S95/S9/701/601 are available at your authorized dealer. Please note that machine defects or residues in the water cannot be excluded if you use inappropriate de-scaling agents. Run the decalcifying program only after the machine has been switched off for at least 5 hours and has cooled down completely. The running decalcifying program must not be interrupted. If using acidic decalcifying agents be sure to immediately remove any splashes and drops from delicate surfaces, especially natural stone and wooden surfaces, or take corresponding precautions. In any case please wait until the filled decalcifying agent is used up and the tank is empty. Never top up the decalcifying agent. Remove and empty water tank. Replace empty water tank. Switch off your machine by pressing ON/OFF key and let it cool down for approx. 5 hours. Open cover (3). Press key until you can hear an acoustic signal. EMPTY TRAY AGENT IN TANK Pour 0.6 litres of water into a container and completely dissolve the contents of a blister pack (2 tablets). Then fill the mixture into the water tank. AGENT IN TANK / OPEN TAP / PRESS CALC Place a sufficiently large container under the pivoting nozzle (20). Remove the Auto-Cappuccino. Turn selector switch for coffee (19) to the symbol and press key . UNIT DECALCIFYING / PLEASE WAIT When an acoustic signal is heard place a container under the height-adjustable tea-spout (22). PRESS CALC UNIT DECALCIFYING / PLEASE WAIT CLOSE TAP UNIT DECALCIFYING / PLEASE WAIT Inside the machine the decalcifying agent is conducted to the drip tray. EMPTY TRAY FILL WATER Place a container under the pivoting nozzle (20). OPEN TAP PRESS CALC UNIT DECALCIFIYING / PLEASE WAIT Place a container under the height-adjustable tea-spout (22). PRESS CALC UNIT DECALCIFIYING / PLEASE WAIT CLOSE TAP UNIT DECALCIFIYING / PLEASE WAIT Inside the machine the water is conducted to the drip tray. CLEAN CONTACTS / EMPTY TRAY (please refer to chapter 14.8) PLEASE WAIT RINSE UNIT UNIT RINSING COFFEE READY 17. Disposal For correct disposal, you should return your coffee machine to your dealer, Jura service centre or Jura Elektroapparate AG. 18. Tips for a perfect coffee Height adjustable coffee-spout You can adjust the height of the coffee-spout to the size of your cups. Grinding Please refer to chapter 3.4 “Adjusting grinder“. Pre-warm cups You should warm cups in advance with hot water or steam. The smaller the quantity of coffee, the more important warming the cups is. Sugar and cream Warmth is lost by stirring the contents of the cup. Adding milk or cream from the refrigerator considerably lowers the temperature of the coffee. 19 E 19. Messages Cause Action FILL WATER FILL BEANS EMPTY GROUNDS Water tank is empty Water level indicator in tank is jammed Tank is calcified, water level indicator is stuck Bean container is empty Message still displayed, although beans filled A foreign object is stuck in the grinder Coffee grounds container is full Message still displayed although grounds container emptied. The message appears after only a few cups have been drawn off Top up with water Empty tank, rinse out, fill up and replace Remove tank, decalcify, rinse well, fill up with water and replace Top up with beans Draw off cup of coffee. FILL BEANS message only disappears after coffee is drawn off Remove foreign object as described in chapter 14.5 “Removing foreign objects“ Remove drip tray, empty grounds container, replace tray The tray was out of the machine for less than 8 sec for emptying. Take tray out again for approx. 10 sec and replace Leave the machine switched on while the grounds container is being emptied. The counter is only reset to zero if the machine is left switched on TRAY MISSING EMPTY TRAY Tray has not been replaced correctly Grounds have fallen under tray and are preventing it from being correctly inserted The residual water container is full Message still displayed, although container emptied Insert tray correctly Remove tray, clean inside of machine, replace tray Remove container carefully, empty, rinse out and replace Remove container, clean metal contacts (please refer to chapter 14.8) Cause Action CLEAN UNIT You have drawn off coffee 220 times or run the rinsing program 180 times Message still displayed, although machine cleaned Clean as described in chapter 14.6 Run cleaning program again; this time do not add cleaning tablet UNIT CALCED The espresso/coffee machine sector needs decalcifying Message still displayed, although machine decalc...

Baixe o seu

Para fazer o download, introduza 2 dígitos :