Step 3.2 Click the Available Network tab of the Wireless Monitor, select the SSID (Network Name) of the wireless network that you wish to connect to, and click Add to Profile. 10 Step 3.3 Enter the wireless security key into the Network Key box if the network you are attempting to connect has wireless security enabled. Click OK. Step 3.4 The connection should be now established. Verify that IP Address, Subnet Mask and Gateway have valid numbers assigned to them (instead of all 0’s). The Status s
Rescan: Clicking Rescan will refresh the network list. Connect: To connect to a wireless network, please refer to Step 1 to 3 in Chapter 3. Add to Profile: To add a network to profile, please follow the instructions below. Step 1 Under Network tab, select a desired network, and click Add to Profile. Step 2 Specify a Profile Name, and configure other settings if needed when the “System Config” box appears below, Click OK. 13 Profile Name: Please give this profile a name, up to 32 alphanumerical C
If your wireless router does not support this feature, you will need to set up the wireless security manually and you can skip this section. We are using the AWLH3028v2 and the AR570W Airlink101 Wireless 150 Router to illustrate the following setup instructions. Step 4.6.1 Open the Airlink101 802.11g Wireless LAN Monitor. Click the Wi-Fi Protect Setup tab. Choose your configuration method: 21 -For Push Button method, click Push Button Config (PBC) button, continue to Step 4.6.2 -For Pin Input Co
1.0 Table of Contents 1. Introduction.......................................................................................................................... 3 1.1 Package Contents.......................................................................................................... 3 1.2 Features......................................................................................................................... 3 1.3 LED Indicators ......................................................
For detailed instructions of other advanced features, please refer to the User’s Manual that can be found on the provided CD. For Macintosh users, you can find the software and installation instructions for MAC 10.4, 10.5, 10.6 is under the MAC directory on the provided CD. Step 1.1 Insert the USB adapter into an available USB port of your computer. Step 1.2 Click Cancel when you see the Found New Hardware Wizard. Windows XP/2000 Users: Windows 7/Vista Users: Step 1.3 Insert the Installation CD
1A Table of Contents 1. Introduction................................................................................................................................. 3 1.1 Package Contents.................................................................................................................. 3 1.2 Features................................................................................................................................. 3 2. Installation....................................
1A RLm. Quick Installation Guide 10/100/1000Mbps PCI Network Adapter Model # AGIGA32PCI Package Contents: • 10/100/1000Mbps PCI Network Adapter • Quick Installation Guide • Driver CD Section 1 Hardware Installation Thanks for your purchase of Airlink101® 10/100/1000Mbps PCI Network Adapter. The Installation of the 10/100/1000Mbps PCI Network Adapter requires hardware installation first and then driver installation. Step 1 Switch off the computer, unplug the power cord, and remove the
1A Introduction The 3.5” External Enclosure provides a simple way to add additional hard disk drive to your notebook or desktop PC. The Enclosure holds standard 3.5" hard disk drive with USB 2.0 interface and data transfer rate of 480 Mbps. Features • LED indicator provides the operating status of your drive • Compatible with any standard 3.5" hard disk drives • Support high capacity hard disk drive of up to 300 GB • Plug-and-Play • Hot swappable capability allows you to connect and disconnect t