Assessments - 0, GPA: 0
(
)
)
|
por este dispositivo também tem outras instruções :
Facilidade de uso
Open the handle. Insert the Pass-Thru into the bay (1). Close the handle
European Union regulatory notice
Chinese notice
WARNING: Use of controls or adjustments or
(2).
performance of procedures other than those specified
Products bearing the CE marking comply with the following EU
Class A equipment
herein or in the laser product's installation guide may result
Directives:
in hazardous radiation exposure. To reduce the risk of
•
Low Voltage Directive 2006/95/EC
exposure to hazardous radiation:
•
EMC Directive 2004/108/EC
• Do not try to open the module enclosure. There are no
user-serviceable components inside.
•
Ecodesign Directive 2009/125/EC, where applicable
• Do not operate controls, make adjustments, or perform
CE compliance of this product is valid if powered with the correct
BSMI notice
procedures to the laser device other than those
CE-marked AC adapter provided by HP.
specified herein.
•
Compliance with these directives implies conformity to applicable
Al ow only HP Authorized Service technicians to repair
harmonized European standards (European Norms) that are listed in
the unit.
the EU Declaration of Conformity issued by HP for this product or
The Center for Devices and Radiological Health (CDRH) of the U.S.
product family and available (in English only) either within the product
Food and Drug Administration implemented regulations for laser
documentation or at the following HP website
products on August 2, 1976. These regulations apply to laser products
(http://www.hp.eu/certificates) (type the product number in the
manufactured from August 1, 1976. Compliance is mandatory for
search field).
products marketed in the United States.
The compliance is indicated by one of the following conformity
Regulatory compliance
markings placed on the product:
identification numbers
For non-telecommunications products and for EU harmonized
telecommunications products, such as Bluetooth® within power class
For the purpose of regulatory compliance certifications and
below 10mW.
Japanese class A notice
identification, this product has been assigned a unique regulatory
model number. The regulatory model number can be found on the
product nameplate label, along with all required approval markings
and information. When requesting compliance information for this
product, always refer to this regulatory model number. The regulatory
For EU non-harmonized telecommunications products (If applicable, a
model number is not the marketing name or model number of the
4-digit notified body number is inserted between CE and !).
Korean class A notice
product.
Federal Communications Commission notice
This equipment has been tested and found to comply with the limits for
a Class A digital device, pursuant to Part 15 of the FCC Rules. These
Please refer to the regulatory label provided on the product.
limits are designed to provide reasonable protection against harmful
Vietnam compliance marking notice
interference when the equipment is operated in a commercial
The point of contact for regulatory mat ers is Hewlet -Packard GmbH,
environment. This equipment generates, uses, and can radiate radio
Dept./MS: HQ-TRE, Herrenberger Strasse 140, 71034 Boeblingen,
This marking is for applicable products only.
frequency energy and, if not instal ed and used in accordance with the
GERMANY.
instructions, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause
Disposal of waste equipment by users in
harmful interference, in which case the user wil be required to correct
private households in the European Union
the interference at personal expense.
Modifications
This symbol on the product or on its packaging
indicates that this product must not be disposed of
with your other household waste. Instead, it is your
The FCC requires the user to be notified that any changes or
responsibility to dispose of your waste equipment by
modifications made to this device that are not expressly approved by
handing it over to a designated collection point for
Hewlett-Packard Company may void the user’s authority to operate the
the recycling of waste electrical and electronic
equipment.
equipment. The separate col ection and recycling of
Laser compliance
Canadian notice (Avis Canadien)
your waste equipment at the time of disposal will help
to conserve natural resources and ensure that it is
This product may be provided with an optical storage device (that is,
recycled in a manner that protects human health and
This Class A digital apparatus meets all requirements of the Canadian
CD or DVD drive) and/or fiber optic transceiver. Each of these devices
the environment. For more information about where
Interference-Causing Equipment Regulations.
contains a laser that is classified as a Class 1 Laser Product in
you can drop off your waste equipment for recycling,
accordance with US FDA regulations and the IEC 60825-1. The
Cet appareil numérique de la classe A respecte toutes les exigences du
please contact your local city office, your household
product does not emit hazardous laser radiation.
Règlement sur le matériel brouilleur du Canada.
waste disposal service or the shop where you
purchased the product.
Each laser product complies with 21 CFR 1040.10 and 1040.11
except for deviations pursuant to Laser Notice No. 50, dated June 24,
2007; and with IEC 60825-1:2007.
... Este manual também é adequado para os modelos :
Computadores - HP ProLiant xw460c Blade Workstation (425.22 kb)