Assessments - 0, GPA: 0
(
)
)
|
por este dispositivo também tem outras instruções :
Facilidade de uso
Cabling the interconnect switch
Accessing the interconnect
switch
The interconnect switch can be accessed remotely using the
Ethernet ports or locally using the DB-9 management serial
port.
To access the interconnect switch remotely:
1. Assign an IP address. By default, the interconnect switch
is set up to obtain its IP address from a BOOTP server
existing on the attached network.
2. From the BOOTP server, use the interconnect switch
MAC address to obtain the switch IP address.
3. From a computer connected to the same network, use the
IP address to access the interconnect switch using a Web
browser or telnet application, which enables you to
Item Description
access the interconnect switch browser-based interface
1
Port 20 RJ-45 connector for 10/100/1000 Mb uplink
(BBI) or command line interface (CLI). The interconnect
2
Port 21 RJ-45 connector for 10/100/1000 Mb uplink
switch logon prompt appears.
3
Port 22 RJ-45 connector for 10/100/1000 Mb uplink
NOTE: If the interconnect switch does not obtain the
4
Port 23 RJ-45 connector for 10/100/1000 Mb uplink
IP address by means of the BOOTP service, you can
5
Port 24 RJ-45 connector for 10/100/1000 Mb uplink
access the interconnect switch locally and configure
the IP address manually. After assigning the IP
address to the interconnect switch, you can then
access the switch remotely.
Regulatory notice
To access the interconnect switch locally:
For complete details, see the GbE2c Ethernet Blade Switch for
1. Connect the interconnect switch DB-9 serial connector,
HP c-Class User Guide located on the HP website
using the null-modem serial cable to a local client device
(http://www.hp.com/go/bladesystem/documentation).
(such as a laptop computer) with VT100 terminal
emulation software.
2. Open a VT100 terminal emulation session with the
following settings: 9600 baud rate, eight data bits, no
parity, one stop bit, and no flow control.
Logging on and configuring
the interconnect switch
To log on to the interconnect switch, enter admin for both the
default user name and password.
NOTE: If you are in the CLI, you might need to press
the Enter key to display the login prompt.
The interconnect switch comes configured with the factory
default configuration. For more information on configuring the
interconnect switch for your network environment, see the
GbE2c Ethernet Blade Switch for HP c-Class User Guide
located on the HP website
(http://www.hp.com/go/bladesystem/documentation).
... Este manual também é adequado para os modelos :
Computadores - HP ProLiant xw460c Blade Workstation (500.64 kb)