Assessments - 0, GPA: 0
(
)
)
|
por este dispositivo também tem outras instruções :
Facilidade de uso
5.
If needed, install the driver or update the driver to the latest version, by installing the latest
LAN remedial kit for the release. You can find the kit on http://itrc.hp.com/ by selecting
openvms_patches in the patch database. LAN kits are named
release_LAN-Vxxxx.ZIPEXE, for example, VMS83I_LAN-V0500.ZIPEXE is the fifth
LAN kit released for Integrity servers running OpenVMS Version V8.3. Consult the release
notes associated with this kit, the .TXT file with the same name, for installation procedures
and a list of changes contained in the kit. After installing the kit, you might need to reboot
the server.
Verifying the OpenVMS Configuration
Follow these steps to verify the OpenVMS configuration:
1.
Enter the following command to verify connectivity to the switch:
MCR LANCP SHOW CONFIGURATION
The link state, speed, duplex mode, flow control setting, auto-negotiation setting, MAC
address, device type, and device name should be listed.
2.
Set up or verify the applications running on the device. Some applications might require
reconfiguration especially as the device names might have changed after the device was
installed. For example, if TCP/IP was configured on the EWC0 device, but the new card is
configured as EWC0, you might need to adjust the TCP/IP configuration to enable it on the
desired device.
Configuring a Card Using Windows Server 2003, Windows Server 2008,
or Windows Server 2008 R2 on HP Integrity Systems
HP Integrity servers automatically detect and configure PCI-compliant adapters when restarting.
The adapter Interrupt Request Line (IRQ) level is automatically set by the Extensible Firmware
Interface (EFI) each time the server restarts. If you encounter configuration problems, see the HP
Support site at:
http://support.hp.com
To manually configure the adapter, follow these steps:
1.
If necessary, install the card as described in the server documentation available online at:
•
http://www.hp.com/go/integrity_servers-docs, or
•
http://www.hp.com/go/Blades-docs (for HP Integrity Server Blades)
2.
Download the driver from the web or from the HP SmartSetup media that came with the
adapter.
NOTE:
When using the HP SmartSetup media, the Hardware Update Wizard automatically
locates the driver.
To download from the web, follow these steps:
a.
Go to: HP Integrity Servers.
b.
Select one of the HP Integrity servers that supports this mezzanine card (for example,
BL860c/BL870c).
c.
Click Download drivers and software.
d.
Click the link that describes the server operating system.
e.
Click Driver-NIC.
f.
Select the appropriate driver.
g.
Download the driver to the server or to another system with a floppy, CD, or DVD
writer.
6
... Este manual também é adequado para os modelos :
Computadores - HP BL860c Single Processor Server Blade (332.21 kb)
Computadores - HP Integrity BL860c Carrier-grade Server Blade (332.21 kb)
Computadores - HP Integrity BL860c i2 Server Blade (332.21 kb)
Computadores - HP Integrity BL860c Server Blade (332.21 kb)