Assessments - 2, GPA: 5 ( )

Fabricante : Fujitsu Arquivo Tamanho: 708.5 kb Arquivo Nome : Língua de Ensino:

1 Carry out steps 1 to 2 of the “Setting Up the Weekly Timer Operation” procedure to select the day that you want to set as the DAY OFF. 2 Press the DAY OFF button. The DAY OFF setting is registered, and the DAY OFF caption appears on the display. . To cancel the DAY OFF setting: You can cancel the setting by pressing the DAY OFF button again. TIMER MODE SET ZONE START/STOP CLOCK ADJUST SET TIME TEMP./DAY FAN CONTROL MASTER CONTROL DAY OFF ENERGY SAVE PM PM TIMER DAY WEEKLY ON OFF DAY OFF 1COOL 2 Example: To switch off timed operation for day 2 (Tuesday) NOTES: (1) The DAY OFF setting is only available for days for which weekly time settings already exist. (2) You can make this setting for any of the next seven days (counting from the current day). (3) The DAY OFF setting is effective over the range illustrated below. The Weekly setting for which an ON time has been set is eligible for the day in which the DAY OFF has been set. Effective range of DAY OFF setting ON OFF ON OFF WEEKLY setting for preceding day WEEKLY setting Preceding day 12:00 a.m. DAY OFF day 12:00 a.m. Next day (4) The display on the clock’s lower line will usually be “ ” for the DAY OFF set day during Weekly operations. ° Precautions during setup MASTER Setup is not possible in the following cases, so amend the time. . If you set an ON time while leaving the OFF time setting blank: Nothing will happen when you press the SET button. To proceed, press the SET TIME button and enter an appropriate setting. . When an attempt is made to set only the OFF time. Nothing will happen when you press the SET TIME button. Press the SET button and amend the entry for the ON time. . ON and OFF times cannot be set to the same value. . The OFF time cannot be set earlier than the ON time. . The WEEKLY 2 settings cannot be set earlier than the WEEKLY 1 settings. . The WEEKLY 1 and WEEKLY 2 time spans cannot overlap. En-10 ENERGY SAVE OPERATION Instructions relating to heating (*) are applicable only to “HEAT & COOL MODEL” (Reverse Cycle). TIMER MODE SET ZONE START/STOP CLOCK ADJUST SET TIME TEMP./DAY FAN CONTROL MASTER CONTROL DAY OFF ENERGY SAVE °F NON STOP AM CLOCK AUTOTo Use the ENERGY SAVE Press the ENERGY SAVE button. The unit will run in the ENERGY SAVE mode. The ENERGY SAVE lamp (green) will light. To Stop the ENERGY SAVE Press the ENERGY SAVE button one more time. The ENERGY SAVE mode will be turned off. The ENERGY SAVE lamp goes off, and the unit will return to the former operat- ing conditions. About the ENERGY SAVE . The energy conservation mode (ENERGY SAVE) raises the set temperature slightly in the cooling mode and lowers the set temperature in the heating mode, using a computer program to economically control the operation of the unit. . If you press the ENERGY SAVE button while the air conditioner is on, it will change to the conservation mode. If you press the ENERGY SAVE button while the unit is in the timer mode (ON timer, WEEKLY timer), the unit will go into the conservation mo...

Baixe o seu

Para fazer o download, introduza 2 dígitos :