• Our products are carefully packed for transportation. All of the material used in our packaging is environmentally friendly (the cardboard is manufactured from used paper) and may be recycled. • Recycling packaging helps conserve raw materials and reduces the amount of waste produced in the world. • Actively help protect the environment by disposing of packaging properly. Take it to your nearest local council disposal point or it may be possible to return it to your supplier. • Packaging mater

. The manufacturer recommends that an air director be previously installed in order to distribute the air flow better. The director is fitted as shown in the following figures. • Select the heating function, Fig. 27. • Set the thermostat to the desired temperature. When this temperature is reached, the appliance turns itself off automatically. It comes back on again when the temperature drops 2-3.C. Warning! Do not cover the air intakes or outlets on your appliance! Fig. 24 Fig. 25 Fig. 26 Fig.

• It must be protected with a 10 A slow- action fuse. • Should an extension lead be required, then this lead should be at least 1.5 mm2 thick per terminal, less than 25 m long and earthed. • There is a cavity at the back of the appliance to house the mains electricity supply cable. See Fig. 2. • Do not allow water to enter your appliance and do not cover the air intakes/outlets. • For safety reasons, the appliance must be at least 20 cm away from any nearby surface before it is turned on, Fig. 5