WARNING: The gearbox gets very hot after extended periods of use. To avoid burns, do not touch the gearbox until it has been allowed to cool. CULTIVATING 1. Move the cultivator to the work area prior to starting the engine/motor. 2. With the engine/motor running and the tines off the ground, press the throttle trigger to increase the engine speed. 3. Hold trigger handle and assist handle firmly. Slowly lower the cultivator until the tines make contact with the ground. 4. As unit begins cultivati

Failure to do so can result in serious injury. ADVERTENCIA: Lea el manual de instrucciones y siga todas las advertencias e instrucciones de seguridad. El no hacerlo puede resultar en lesiones graves. AVERTISSEMENT: Lire le manuel d’instructions et bien respecter tous les avertissements et toutes les instructions de securite. Tout defaut de le faire pourrait entrainer des blessures graves. Electrolux Home Products, Inc. 250 Bobby Jones Expressway Augusta, GA 30907 Copyright E2002 Electrolux Home

Lock with jam nut so that . bars are free to swing. 2. Attach depth crank (2) at (3) and (3). Adjusting nuts should be equally spaced on threads. 3. Clamp wheel standards to draw bar assembly as shown at (4) and (4). 4. Clamp gang tool holders to tool bar as shown at (5) and (5). 5. Attach the four tool standards to the right and left tool frame assemblies as illustrated at (6). 6. Assemble upper and lower tool control handle as shown. 7. Attach tool handle assembly (7) to draw bar assemb

Remove all debris and hard or sharp objects such as glass, wire, etc. • Be aware of the risk of injury to the head, hands and feet. • Clear the area of children, bystanders, and pets. At a minimum, keep all children, bystanders, and pets outside a 50 feet (15 m.) radius; there still may be a risk to bystanders from thrown objects. Bystanders should be encouraged to wear eye protection. If you are approached, stop the unit immediately. • Squeeze the throttle control and check that it returns auto

These will provide a reminder of the care and attention that is required during operation. If any symbol is missing, has been damaged or is illegible, it must immediately be replaced with a new one. This is what the symbols mean: Warning! Read the owner’s manual before operating the machine. Warning! Rotating blade. Warning! This symbol highlights important text in these instructions. Risk of serious personal injury or damage to the machine if the instructions are not followed. 2 SAFETY INSTRUCT

Drain all fuel from the fuel tank into a container. Do not use fuel that has been stored for more than 60 days. Dispose of the old fuel in accordance to local regulations. 2. Start the engine and allow it to run until it stalls. This ensures that all fuel has been drained from the carburetor. 3. Allow the engine to cool. Remove the spark plug and put 1 oz. (30 ml) of high quality motor oil into the cylinder. Pull the starter rope slowly to distribute the oil. Reinstall the spark plug. NOTE: Remo

Spring Return Fuel Tank Capacity................................................................................................................................. 14 ounces (415 ml) CULTIVATOR* Drive Shaft Tube .................................................................................................................................................. Steel Tube Throttle Control ...................................................................................................................

2 SAFETY....................................................................... 3 Safety.....................................................................3 General Safety ....................................................... 4 Start-up Safety ....................................................... 4 Operation Safety .................................................... 4 Transport Safety..................................................... 4 Service and Maintenance Safety....................