Assessments - 1, GPA: 3 ( )

Fabricante : Hamilton Beach Arquivo Tamanho: 513.07 kb Arquivo Nome : Língua de Ensino:

11. Do not let cord hang over edge of table or counter, or touch hot surfaces. 12. Keep hands and utensils away from moving blade and disc while processing food to reduce the risk of severe personal injury and/or damage to the food processor. A rubber scraper may be used but ONLY when the food processor is not running. 13. The blade and disc are sharp. Handle carefully. Store out of reach of children. 14. To reduce the risk of injury, never place cutting blade or disc on base without first putting bowl properly in place. 15. Be certain lid is securely locked in place before operating appliance. 16. Never feed food into food chute by hand. Always use food pusher. 17. Do not attempt to defeat the lid interlock mechanism. 18. Make sure the blade or disc has come to a full stop before removing lid. 19. To reduce the risk of injury, be sure to insert or remove blade and disc using hubs provided for this purpose. Use caution when removing blade and disc from the bowl, when emptying the bowl, and when cleaning. 20. Be sure to turn switch to OFF ( O ) position after each use. Always use the pusher to clear the food chute. When this method is not possible, turn the motor off and disassemble unit to remove the remaining food. 21. The appliance is not intended for commercial, professional or industrial use. It is designed and built exclusively for household use only. 22. Never use appliance for a longer period or with a larger amount of ingredients other than that recommended by appliance manufacturer. 23. The maximum rating of this unit is based on using the Chopping/Mixing Blade. Using the Slicing/Shredding Disc may draw significantly less power. 24. Do not place on or near a hot gas or electric burner or in a heated oven. 25. Do not use appliance for other than intended use. SAVE THESE INSTRUCTIONS! Other Consumer Safety Information This appliance is intended for household use only. WARNING! Shock Hazard: This appliance has a polarized plug (one blade is wider than the other). To reduce the risk of electric shock, this plug is intended to fit into a polarized outlet only one way. If the plug does not fit fully into the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Do not attempt to modify the plug in any way. 2 To avoid an electrical circuit overload, do not use another high wattage appliance on the same circuit with your food processor. The length of the cord used on this appliance was selected to reduce the hazards of becoming tangled in, or tripping over a longer cord. If a longer cord is necessary, an approved extension cord may be used. The electrical rating of the extension cord must be equal to or greater than the rating of the appliance. Care must be taken to arrange the extension cord so that it will not drape over the countertop or tabletop where it can be pulled on by children or accidentally tripped over. 840170100 Ev03.qxd 7/16/07 10:37 AM Page 3 840170100 Ev03.qxd 7/16/07 10:37 AM Page 3 Parts and Features BEFORE FIRST USE: Unpack processor. Handle Chopping/Mixing Blade and Slicer/Shredder Disc carefully; they are very sharp. Wash all parts except base in hot, soapy water. Rinse then dry. Food Pusher Food Chute Lid Food Chute Bowl Lid Bowl Base Control Dial Chopping/Mixing Reversible Slicer/ Blade Shredder Disc Removable DriveSleeve 3 840170100 Ev03.qxd 7/16/07 10:37 AM Page 4 840170100 Ev03.qxd 7/16/07 10:37 AM Page 4 Optional Accessories 6.0mm Slicing Blade French Fry Blade Storage Case To Order Optional Accessories: 1-800-851-8900 (USA) 1-800-267-2826 (Canada) Using Your Food Processor How to Lock the Bowl Align base and bowl as illustrated. Turn bowl clockwise until it locks into place. The bowl will lock onto the base in 4 different positions for user convenience. NOTE: The food processor will not work unless the bowl is locked into position. 4 840170100 Ev03.qxd 7/16/07 10:37 AM Page 5 840170100 Ev03.qxd 7/16/07 10:37 AM Page 5 How to Assemble and Lock the Lid Align lid as illustrated by placing thumb on lid tab and twisting lid clockwise. Four visual alignment markers are provided (see illustration), one on bowl, one on handle and two on bowl lid. NOTE: The food processor will not work unless the lid is locked into position. Food chute lid hinges onto back of food chute. Push down lid to latch onto food chute. Before removing lid, switch to OFF (O) position and wait until blade stops rotating. To remove food chute lid for cleaning, place one hand in food pusher opening and the other on food chute. Rotate hand from left to right and lift up. This will disengage left notch from slot and then right notch from slot. Reverse the directions to place food chute lid back on food chute. How to Operate the Controls The control dial is conveniently located on the front of the base. Rotate the knob clockwise to select a speed: 1 and 2 for Low 3 and 4 for High The processor will run continuously. For instant on and off control, use the PULSE (P) button by rotating knob...

Baixe o seu

Para fazer o download, introduza 2 dígitos :