Assessments - 3, GPA: 4.7
(
)
)
|
Facilidade de uso
If the trouble cannot be solved, or if you have a problem other than those described hereunder, please contact our technical service or your nearest dealer. TROUBLE CAUSES REMEDY Low surface quality (at aluminum and similar materials) : Rough surface, Large chip, Not cooling the saw blade surfaces Lubricating the saw blade cutting surfaces, Using of cooling liquid Not homogenous surface, Saw blade traces visible Using of damaged or blunt saw blade Check the saw blade teeth. Replace if necessary. Saw blade moves to quick The cutting speed is too high for the material. Decrease the cutting speed. Motor does not work (Start button is pressed, not working) No power supply to the machine. Check the electric cable connections. Check the electric power sockets. Motor is working but the pneumatic clamp pistons do not work. The air supply connections are missing, or the air pressure is too low. Check the air compressor connections. Adjust the air pressure between 6-8 Bar on the conditioner. The saw blade rotates in reverse direction. The electric connection, the power cable or the connection at the panel is wrong. Let the electric connections carry out by a qualified electrician. 21 Operating and Safety Instructions 11. ELECTRIC / PNEUMATIC COMPONENTS 11.1 ELECTRIC COMPONENTS ORDER No. PART NAME QUANTITY 163-002 MOTOR QS 90 L 2A H 2.2 kW 400V 3 N PE 50 Hz 1 161-005 LE1-M35Q712 MOTOR PATCHER 1 164-013 4x1,5 mm POWER CABLE H0 7RN-F 3,5 m 165-050 ELECTRIC PLUG 1 11.2 PNEUMATIC COMPONENTS ORDER No. PART NAME QUANTITY 241-009 FRC-1/8-D-MINI CONDITIONER 1 241-023 SV-1/4-3/2-D-O VALVE 1 550-003 PNEUMATIC CLAMP 2 22 Operating and Safety Instructions ...
Este manual também é adequado para os modelos :Jig Saw e - PEGASUS-02 M (591.77 kb)
Jig Saw e - PEGASUS-02 M (591.77 kb)
Jig Saw e - PEGASUS-02 M (591.77 kb)
Jig Saw e - PEGASUS-02 P (591.77 kb)