Assessments - 3, GPA: 4.3
(
)
)
|
Facilidade de uso
After setting up the remote controls you can operate up to 3 different devices with the SRP2003 and up to 6 different devices with the SRP2006. Simple Setup Both universal remote controls come with the innovative Simple Setup technology After setup, the remote controls can operate TV, DVD player / recorder (including Blu-ray player) and all common Cable, Satellite, DTV and other set top boxes, such as DirecTV, Comcast, AT&T Verizon, Time Warner Scientific Atlanta, Tivo and many more. The SRP2006 can also be set up for VCR, and DVR. Simply follow the instructions in chapter 2.2 to set up the remote controls for your devices. 2 9 3 4 5 6 8 7 9 5 6 8 7 7 2 EN 3 Glow buttons (SRP2006 only) The SRP2006 glow buttons: (ENTER, (-) and the numeric buttons) glow in the dark, enabling easy use of the remote control, even in a dimly lit room. To fully benefit from the support that Philips offers, register your product at 2 Getting started 2.1 Inserting the batteries • Insert 2 AAA type batteries, noting the + and -configuration in the battery compartment. ^ Note_ When replacing the batteries, all user settings will be retained in the remote control memory for 5 minutes. 2.2 Setting up the universal remote controls The example below instructs you how to set up your universal remote controls for your TV You can repeat the same steps for other devices (DVD player / recorder; DTV Cable / Satellite box, DVR and VCR) which you want to operate, using the universal remote controls. Note_ The setup procedure is the same for both remote controls. The remote controls can be set up to operate any 3 or 6 of the following devices: Device name Description TV Traditional TV, LCD / Plasma TV and projection TV, TV part ofTV / VCR, TV / VCR / DVD and TV / DVD combos DVD DVD player / recorder (DVDR), DVD / Hard Disk Drive combination (DVDR-HDD), Blu-Ray player High Definition DVD player (HD-DVD), DVD part ofTV / DVD, TV / VCR / DVD and VCR / DVD combos CBL/SAT Cable box, satellite receiver Internet Protocol TV (IPTV), Free To Air TV High Definition Television decoder (HDTV), Digital Television (DTV) and Tivo VCR Video cassette player / (SRP2006 only) recorderVCR part of TV/ VCR, TV/VCR/DVD and VCR/DVD combos DVR Digital / Personal Video (SRP2006 only) Recorder (DVR / PVR), Tivo Example: setting up the universal remote controls to operate your TV: 1 Switch ON the TV manually or use the original remote control for this. Tune to channel 1. 2 Press and hold the 5 (tv~) device selection button for 5 seconds until the red Setup light © blinks. The remote control is now in setup mode. 4 EN EN 5 Look up the 4-digit code for your brand in the brand list at the back of this user manual. A 4-digit code is shown for each brand. Use the digit buttons to enter the code for your brand. • If the red Setup • light ® turns off, an invalid code was entered. In this case, try again. Aim the remote 5 - 60 sec control at the TV. Press and hold the ® button. Release it immediately as soon as the TV switches off • This step normally takes between 5 and 60 seconds. In extreme circumstances this step can take up to 15 minutes. Switch ON the TV. Try out the buttons that you need for operating it. Try, for example, if the - CH + and digit buttons function properly If a button does not work as expected, press and hold that button. Release it immediately as soon as it works. For more information, see chapter 2.2.2. Press the (tv) device selection button twice to finish setup. • When no button is pressed for 5 minutes or more, the remote control will exit setup mode, automatically saving all your settings. n Important If you made a mistake: • Press the device selection button twice to exit setup. The red Setup light ® turns off • Restart from the beginning. • If the device does not respond at all or not to all of the button commands or if you cannot find the code for your brand, enter r9, 9, 9, 9’ in step 3 and continue with step 4.The remote control will now search its full database for a code that works with your TV Full database search may take up to 15 minutes. 2.2.1 Setting up the remote controls for other devices (DVD player / recorder DTV Cable / Satellite box, DVR and VCR) 1 Make sure the device is switched on and operational. E.g. insert a disc in the DVD player / recorder or a video cassette in the VCR (SRP2006 only). 2 Then follow steps 2 to 6 of 'Setting up the universal remote controls to operate your TV'. Make sure to use the correct device selection button^ - for SRP2003: ® or - for SRP2006: (j™), dvr , (cbl), (vcr) or sat . 2.2.2 Improving buttons When correctly set up, the remote control should be able to operate all your devices. However when using the remote control for the first time it might occur that some buttons do not yet function as expected. In this case you can have the remote control search for alternatives. m Note Improving buttons is not p...