Assessments - 1, GPA: 4
(
)
)
|
Facilidade de uso
TUNE I T TO YOUR LOCAL PBS CH THEN. . . PLEASE PUSH CH UP KEY ---- SET UP CHANNEL ---- ANTENNA : CABLE AUTO SET WAHJIrfAl.MMinilia VCH Plus* CH SET UP 5 Follow the One Time D-VHS VCR Setup instructions on pages 12-14. * Clock Auto Set will be performed when channels are replaced in memory. To cancel, press STOP when “AUTO CLOCK SET PROCEEDING" appears on-screen. To Setup the D-VHS VCR in Case a Cable Box or DSS Receiver was Installed or Replaced 1 Press ACTION to display the menu. Sgt up vcr SET CLOCK 2 Press AT to select “SET HWhMimuitt UP CHANNEL,” and then press ► to display the “SET UP CHANNEL” screen. 3 Press AT and T to select and set “CABLE/ DSS BOX SET UP,” and then select and set your connection type. * If you selected “NO", go to “Alternate Instructions” on page 14. * To exit this mode, press ACTION three times. 4 Press AT and ► to select and set “CABLE/DSS BOX ► VCR►TV,”and then continue with steps 4-7 on pages 12, 13. If these steps are completed, the “SET UP CHANNEL” screen will appear. When Using the 100 key When selecting CABLE channels 100 to 125 with the NUMBERED keys, first press the 100 key and then enter the remaining two digits. For example, to select channel 125: Press NUMBERED keys 100, then 2, then 5. ARE YOU USING A CABLE BOX OR OSS RECEIVER? ¡rea NO m __IJUBBIsWKMliaJM VCR»CABLE/DSS BOX»TV SELECT SET END A ▼ KEY ► KEY ACTION KEY Some screens shown above may not be displayed during digital playback. This D-VHS VCR will accurately maintain its calendar up to Dec. 31, 2097,11:59PM. Normal TV or Cable channels are automatically selected and placed in memory depending on how your D-VHS VCR is hooked up. If you change your Cable Box or DSS Receiver, please perform the “Auto Clock Set" section on pages 12 and 13. 33 Advanced Operation D-VHS VCR & Cassette Information Reset all D-VHS VCR Memory Functions Use when moving the D-VHS VCR to a new location, or if a mistake was made in the One Time D-VHS VCR Setup section. • Make sure a tape is not inserted in the D-VHS VCR. p Press and hold both PLAY and CHANNEL A on the D-VHS VCR for more than 5 seconds. • The power will shut. Q Perform the One Time D-VHS VCR Setup section on page 12. To prevent accidental erasure a recorded tape Break off the tab. Tab Screw driver D.S.T. (Daylight Saving Time) Your D-VHS VCR can be set to automatically adjust the clock for Daylight Saving Time. Spring (First Sunday in April) When the D-VHS VCR is set to DST:ON, it automatically adds one hour. NORMAL TIME 1:00 a.m. 2:00 a.m. DAYLIGHT SAVING TIME 3:00 a.m. 4:00 a.m. Autumn (Last Sunday in October) When the D-VHS VCR is set to DST:ON, it automatically turns back one hour. DAYLIGHT 11:00 a.m. 2:00 a.m. SAVING TIME NORMAL TIMW] 1:00 a.m. 2:00 a.m. If your area does not observe Daylight Saving Time, select DST:OFF. Keep these time changes in mind when programming the D-VHS VCR for timer recordings. Record/Playback Time Only use tapes with the IVHSI or 0(VHSl mark in this unit. Tape Speed Setting [VHSl Type of Video Cassette T60 T120 T160 SP (Standard Play) 1 Hour 2 Hours 2 Hours 40 Minutes LP (Long Play) 2 Hours 4 Hours 5 Hours 20 Minutes SLP (Super Long Play) 3 Hours 6 Hours 8 Hours Tape Speed Setting tÖiVUSl Type of Video Cassette DF-300 DF-420 STD (Standard) 5 Hours 7 Hours HS (High Speed) 2 Hours 30 Minutes 3 Hours 30 Minutes 34 Built-in Head Cleaner Specifications A clean video head helps produce a clear picture. So, we have equipped your D-VHS VCR with a built-in, non chemical head cleaning system that helps prevent clogging of the video heads. Cleaning is performed each time you load or unload a video cassette. NOTE: This feature is preventative only. If your video heads are seriously clogged, consider the use of a chemical nonabrasive head cleaning kit. Cleaning the D-VHS VCR Use a soft cloth or dusting attachment of your vacuum cleaner to dust your D-VHS VCR. Remove dust from the ventilation holes on the back sides and bottom of the cabinet. Plastic surfaces are easily scratched and can be marred by alcohol and various solvents. Avoid excessive use of oil-based furniture polishes since the materials used in the cabinet will accumulate more dust. We recommend using a nonabrasive, antistatic cleaner and polisher. FCC Warning: To assure continued FCC compliance, the user must use only provided shielded interfacing cable with ferrite cores when connecting to the Set Top Box. Also, any unauthorized changes or modifications to this equipment would void the users authority to operate. Power Source: Power Consumption: VHS Video Signal: Video Recording System : Audio Track: Tuner: Broadcast Channels: CABLE Channels: D-VHS Video/Audio Signal: 120V AC, 60 Hz Approx. 33 watts (Power on) Approx. 8.9 watts (Power off) EIA Standard NTSC color 4 rotary heads helical scanning system 1 track (Normal) 2 channel (Hi-Fi Audio Sound) VHF2-13, UHF 14-69 Midband A through I ...