Log:
Assessments - 2, GPA: 4 ( )

Instruções de Operação Samsung, Modelo SC4320

Fabricante : Samsung
Arquivo Tamanho: 1.76 mb
Arquivo Nome :
Língua de Ensino: en
Ir para baixar



por este dispositivo também tem outras instruções :

Facilidade de uso


DUSTING BRUSH CREVICE TOOL Adjust the inlet lever according to the floor surface. Remove waste matter completely if the inlet is blocked. OPTION ....Carpet Cleaning ....Floor Cleaning Remove waste matter completely when inlet is blocked. Turn the lock button to ‘UNLOCK’, and remove waste matter. OPTION For picking up pet hair and fibre on upholstery and bed linen. Turbine Brush To reassemble, align the cover to the front of the main body and close. After closing the cover, ensure that the lock button is turned to the ‘LOCK’ position. Warning : Use for bedclothes only. Be cautious not to damage brush during unclogging. Clogs on turbine keep brush from turning, thus need to be unclogged as follows. Brush for blanket 5 1 4 5 6 2 3 3EMPTYING THE DUST BIN Once dust reaches the dust full mark, or sution is noticeably reduced during cleaning, empty the dust bin. Throw away dust into the bin. Close the dust bin cover. Before use, push the dust bin into the main body of the vacuum cleaner until you hear the "click" sound. Take the dust bin out by pressing the button. Separate the dust bin cover. NOTE You may rinse the dust bin with cold water. - Empty into a plastic bag (recommended for asthma/allergy sufferers) 4 CLEANING THE DUST PACK 4-1. WHEN TO CLEAN THE DUST PACK -If suction is noticeably reduced during cleaning, please check the dust pack as indicated below. Turn the vacuum power to 'MAX' HANDLE CONTROL If suction is noticeably reduced with the inlet floating 10cm above flat floor, clean it. NOTE When suction is noticeably reduced continuously, please empty the Dust Pack(4-2) as shown in the following illustration. 6 4-2 CLEANING THE DUST PACK 2 Remove the sponge and filter from the dust pack Remove the dust bin and dust pack as shown. 3 4 Wash the sponge and the filter of the dust pack with water. 5 6 Let the sponge and filter dry in the shade for more than 12 hours. Put the sponge and filter into the dust Put the assembled dust pack pack. into the main body. NOTE : Make sure the filter is completely dry before putting it back into the vacuum cleaner. Allow 12 hours for it to dry. 7 8 Take out both the dust bin and the dust pack. Remove the motor protection filter from the vacuum cleaner. Shake and tap the dust from it and put back in machine. NOTE : Replacement filters are available at your local Samsung distributor. 5CLEANING THE MOTOR PROTECTION FILTER Press the fixed frame part at the back of the main body to remove. 6CLEANING THE OUTLET FILTER Remove and replace the blocked outlet filter. OPTION - MICRO FILTER OPTION - IF YOU HAVE A PROBLEM PROBLEM CAUSE REMEDY 0 Motor does not start. No power supply. Thermal cut-out. Check cable, plug and socket. Leave to cool. Suction force is gradually decreasing. Nozzle, suction hose or tube is blocked. Check for blockage and remove it. Cord does not rewind fully. Check that the cord is not twisted or wound unevenly. Pull the cord out 2-3m and push the cord rewind button. Vacuum cleaner does not pick up d...

Este manual também é adequado para os modelos :
Aspiradores - SC4330 (1.76 mb)
Aspiradores - SC4340 (1.76 mb)
Aspiradores - SC4350 (1.76 mb)
Aspiradores - SC4360 (1.76 mb)

Escreva a sua própria avaliação do dispositivo



Mensagem
Seu nome :
Introduza os dois dígitos :
capcha





categorias