Assessments - 1, GPA: 4 ( )

Fabricante : Sony Arquivo Tamanho: 688.3 kb Arquivo Nome : Língua de Ensino:

Use these buttons for additional operations 0/) P p6 OPERATE (or POWER) VOL +/– To Press Adjust the volume VOL +/– Stop playback p6 Fast-forward or rewind the tape )or 0 Pause playback P Press the button again to resume play after pause. Eject the cassette p6 Turn on/off the player OPERATE (or POWER, see page 2) Basic Operations 9EN Basic Operations Recording on a tape 3 1 Connect the supplied AC power cord (see page 18). 1 Press p6to open the tape compartment and insert a blank tape. Use TYPE I (normal) tape only. With the side you want to record on facing upward 2 Select the program source you want to record. Display To record from the CD player, press CD and insert a CD (see page 4). CFD-V25/V34/V37 To record from the radio, press FM or AM (CFD-V25/V34/V37) or RADIO (CFD-V34L/V37L/ CFD-V34L/V37L/930L 930L) and tune in the station you want (see page 6). 10EN Basic Operations Press rto start recording. ((is depressed automatically). Tips • Adjusting the volume or the audio emphasis (page 20) will not affect the recording level. • CFD-V34L/V37L/930L only: If the MW/LW program makes a whistling sound after you’ve pressed rin step 3, press PLAY MODE/ISS (Interference Suppress Switch) repeatedly until the noise is at a minimum. • For the best results, use the AC power as a power source for recording. • To erase a recording, proceed as follows: 1 Press TAPE until “TAPE” appears in the display. Insert the tape whose recording you want to erase into the tape compartment. 2 Press r. Use these buttons for additional operations OPERATE p6 P (or POWER) To Press Stop recording p6 Pause recording P Press the button again to resume recording. Turn on/off the power OPERATE (or POWER, see page 2) Basic Operations 11EN Basic Operations The CD Player Using the display You can check information about the CD using the display. DISPLAY/ENTER Checking the total track number and playing time Check the display in stop mode. Total track number Total playing time Checking the remaining time Press DISPLAY/ENTER while playing a CD. To display Press DISPLAY/ENTER Remaining time on the Once current track* Remaining time on the CD Twice and the number of tracks left Playing time and the current Three times track number * For a track whose number is more than 20, the remaining time appears as “- -:- -” in the display. 12EN The CD Player Locating a specific track You can quickly locate any track using the number buttons. You can also find a Number specific point in a track while playing a buttons CD. =/+ The CD Note You cannot locate a specific track if “SHUF” or ”PGM” is lit in the display. Turn off the indication by pressing p. Tip When you locate a track numbered over 10, press >10 first, then the corresponding number buttons. Example: To play track number 23, press >10 first, then 2 and 3. To locate Press a specific track directly a number button of the track. a point while listening to the sound +(forward) or = (backward) while playing and hold down until you find the point. a point while observing the display +(forward) or = (backward) in pause and hold down until you find the point. 13EN The CD Player Playing tracks repeatedly (Repeat Play) Number You can play tracks repeatedly in buttons normal, shuffle or program play modes (see page 16). Tip To enjoy a short repeat play, use LOOP. As soon as you press and hold LOOP during play, the player starts a loop play of the part between the point where you pressed LOOP and a point about a second behind. When you release LOOP, the player returns to normal play. MODE ( CD 1 Press CD. 2 Press MODE (PLAY MODE on the player) repeatedly until the repeat mode you want appears in the display. To repeat Select a single track “REP 1” all tracks “REP ALL” tracks in random order “SHUF” “REP” programed tracks “PGM” “REP” 3 Do either of the following to start repe...

Baixe o seu

Para fazer o download, introduza 2 dígitos :