Assessments - 5, GPA: 3.8 ( )

Fabricante : Sony Arquivo Tamanho: 688.3 kb Arquivo Nome : Língua de Ensino:

Battery compartment to a wall outlet Tip Only for the customers supplied with an AC plug adaptor: Use the supplied AC plug adaptor if the plug of the AC power cord does not match your outlet. Note When you operate the player with the batteries, you cannot turn on the player using the remote. Connecting the AC power cord Insert one end of the supplied AC power cord to the AC IN socket located at the rear of the player, and the other end to the wall outlet. Adjusting the voltage (CFD-V25/V34/V37 only) Be sure to set the VOLTAGE SELECTOR (at the bottom) to your local power supply. Inserting batteries into the remote Insert two R6 (size AA) batteries (not supplied) Replacing batteries With normal use, the batteries should last for about six months. When the remote no longer operates the player, replace all the batteries with new ones. 18EN Setting Up Tip Replace the batteries when the OPR/BATT indicator dims or when the player stops operating. Replace all the batteries with new ones. Before you replace the batteries, be sure to take out the CD from the player. Using the player on batteries Insert six R20 (size D) batteries (not supplied) into the battery compartment. To use the player on batteries, disconnect the AC power cord from the player. Setting 19EN Setting Up Adjusting the MEGA BASS TONE H/L sound emphasis (TONE/MEGA BASS) You can adjust the audio emphasis of the sound you are listening to. Adjusting the tone Press TONE H or L. Press TONE H to enhance the high tone and TONE L to enhance the low tone. Reinforcing the bass sound Press MEGA BASS. To return to normal sound, press the button again. 20EN Setting Up Additional Information Precautions On safety • As the laser beam used in the CD player section is harmful to the eyes, do not attempt to disassemble the casing. Refer servicing to qualified personnel only. • Should any solid object or liquid fall into the player, unplug the player, and have it checked by qualified personnel before operating it any further. On power sources • For AC operation, check that the player’s operating voltage is identical with your local power supply (see “Specifications”) and use the supplied AC power cord; do not use any other type. The voltage selector is located at the bottom of the player (CFD-V25/ V34/V37 only). • The player is not disconnected from the AC power source (mains) as long as it is connected to the wall outlet, even if the player itself has been turned off. • For battery operation, use six R20 (size D) batteries. • When the batteries are not to be used, remove them to avoid damage that can be caused by battery leakage or corrosion. • The nameplate indicating operating voltage, power consumption, etc. is located at the bottom. On placement • Do not leave the player in a location near heat sources, or in a place subject to direct sunlight, excessive dust or mechanical shock. • Do not place the player on an inclined or unstable place. • Do not place anything within 10 mm of the side of the cabinet. The ventilation holes must be unobstructed for the player to operate properly and prolong the life of its components. • If the player is left in a car parked in the sun, be sure to choose a location in the car where the player will not be subjected to the direct rays of the sun. • Since a strong magnet is used for the speakers, keep personal credit cards using magnetic coding or spring- wound watches away from the player to prevent possible damage from the magnet. On operation • If the player is brought directly from a cold to a warm location, or is placed in a very damp room, moisture may condense on the lenses inside the CD player section. Should this occur, the player will not operate properly. In this case, remove the CD and wait about an hour for the moisture to evaporate. • If the player has not been used for a long time...

Baixe o seu

Para fazer o download, introduza 2 dígitos :