Assessments - 0, GPA: 5
(
)
)
|
Facilidade de uso
A list of the Factory Service Center locations and phone numbers is provided on page 24 for your convenience. 21 LIMITED WARRANTY - California Only - Makita U.S.A., Inc. a distributor of utility and ¡awn and garden equipment in the U.S., warrants to the owner of 1995 and later utility and/or lawn and garden equipment engines that the engine 0) has been designed, built, and equipped at the time of manufacture so as to conform with the applicable regulations of the California Air Resources Board,and (2) is free from defects in materials and workmanship which may cause it to fail to conform with those regulations as applicable according to the terms and conditions stated below. WARRANTY PERIOD The warranty period begins on the date which the utility and/or lawn and garden equipment engine is delivered to the original retail purchaser and ends two years after that date. During this two year period Maikita U.S.A., Inc. warrants to the original retail purchaser and each subsequent purchaser that the engine is free from defect in material and workmanship that can cause the failure of a warranted emission-related part. WHAT IS COVERED UNDER THIS WARRANTY Repair and/or replacement of any warranted emission-related part will be performed at no charge provided the work is performed at an authorized warranty station. There will also be no charge for any diagnostic labor performed at an authorized warranty station which leads to the determination that a warranted emission-related part is defective. Any warranted part which is not scheduled for replacement as required maintenance, or which is scheduled only for regular inspection to the effect of “repair or replace as necessary” shall be warranted for the warranty period. Any warranted part which is scheduled for replacement as required maintenance shall be warranted for the period of time up to the first scheduled replacement of the part. This warranty shall apply only towards the repair, replacement, and/or adjustment of the component parts listed below. EMISSION-RELATED PARTS COVERED UNDER THIS WARRANTY 1. Fuel Metering Systems (a) Carburetor and its internal parts (b) Air cleaner plate (c) Air cleaner case (d) Air cleaner element (e) Fuel filter (f) Throttle stopper 2. Ignition Systems (a) Spark Plug (b) Flywheel Magneto (c) Ignition Coil 3. Other Miscellaneous Items Used in Above Systems (a) Fuel Hoses (b) Sealing Gaskets If it is determined by an authorized warranty station that other engine components have been damaged due to the failure of a warranted emission-related part during the warranty period, Makita U.S.A., Inc. will repair and/or replace the necessary components. 22 WHAT IS NOT COVERED UNDER THIS WARRANTY This warranty does not cover any emission-related part which malfunctions, fails, or is damaged due to alterations and/or modifications such as changing, adding, or removing parts. When an engine is being serviced under warranty, Makita U.S.A., Inc. and any of its authorized dealers, distributors, or warranty stations shall not be liable for any loss of use of the engine, for any damage to goods, or loss of time or inconvenience. This limited warranty also does not apply to any emission-related part which malfunctions, fails, or is damaged due to failure to follow the maintenance and operating instructions specified in the 1995 and later Owner’s Manual including: (a) Improper or inadequate maintenance of any warranted emission-related part. (b) Improper installation, adjustment, or repair of the engine or any warranted emission-related part unless performed by a factory authorized warranty station. (c) Failure to use recommended fuel as specified in the 1995 and later Owner's Manual. (d) Repairs and diagnosis performed outside of an authorized warranty station. (e) Use of parts which are not authorized by Makita U.S.A., Inc. MAINTENANCE SCHEDULE The engine owner is responsible for having all scheduled inspection and maintenance services performed at the intervals specified in the 1995 and later Owner’s Manual and to retain records of these services as having been performed. These records should be transferred to each subsequent owner of the engine. Makita U.S.A., Inc., cannot deny a claim solely because there are no records of scheduled maintenance; however, a warranty claim may be denied if ihe failure to perform the scheduled maintenance and inspection resulted in the failure of a warranted emission-related part. As a minimum, the engine owner is responsible for the scheduled inspection and maintenance described below which an based on the procedures described in the Owner’s Manual. PROCEDURE INTERVAL (a) Check all nuts and bolts and tighten as necessary Every 8 hours of use or daily. (b) Check air passages and engine cylinder fins for clogging. Remove all obstructions as necessary. Every 8 hours of use or daily. (c) Clean the air cleaner. Every 8 hours of use or daily. (d) Check the spark plug. Clean and adj...
Este manual também é adequado para os modelos :Clippers - BRUSH CUTTER RBC280 (2.14 mb)
Clippers - BRUSH CUTTER RBC281 (2.14 mb)
Clippers - BRUSH CUTTER RBC320 (2.14 mb)