Assessments - 4, GPA: 3.8
(
)
)
|
Facilidade de uso
-Do not start the hedge trimmer without having a firm grip on both handles with both hands! The trimmer is designed for use by left- or right-handers, and can be used on both sides equally well. -NEVER affix the grip safeties in the down position! -NEVER affix the grip safeties in the down position! -Switch off the hedge trimmer immediately if you notice any change in its behaviour. -Immediately unplug the mains plug if the power cord should become damaged or severed. -Immediately switch off the motor and unplug the mains plug if the cutter should come into contact with a fence or other hard object. Check the cutter for damage. -Before checking the cutter, taking care of faults, or removing material caught in the cutter, always switch off the trimmer and unplug the mains plug. -Before taking breaks and before leaving the hedge trimmer unattended, always switch it off and unplug the mains plug. Place the trimmer in such a way that it cannot endanger anyone. Extension power cord -Use only splash-proof extension cords that are approved for outdoor use and marked as such. -When selecting an extension cord, give preference to cords in fluorescent or eye-catching colours. -The hedge trimmer is protectively insulated in accordance with VDE (German Electricians. Association) Standard 0740 Class II, and can therefore be connected to plug sockets without ground contact. -Always work in such a way that the extension power cord is behind you! -Always start near the power source and work away from it. This ensures that the extension cord stays behind the work area. -The trimmer power cord must likewise always be behind the operator. Make sure that it does not get caught, or comes into contact with sharp objects. Route the cord in such a way that no persons can be endangered. Important: Work especially carefully when the extension cord has to be routed over the hedge! -Do not use any extension cord with a line cross-section of less than 3 x 1.5 mm2. When using a reel, make sure that the cord is completely unrolled. The cord length must not exceed 30 m / 100 ft! Transportation and storage -When moving the hedge trimmer to another location, including during work, always unplug the mains plug. -Never carry or transport the trimmer with the cutter running! -Never grasp the cutter with your hands! -When transporting the hedge trimmer for more than short distances, always put on the sheath supplied with the unit. -Carry the trimmer only by the front handle. The cutter should be pointing backwards. -When carrying the hedge trimmer in a vehicle, make sure it is in a secure position. It should be transported only in the trunk or in a transport area separate from the driver. -Store the hedge trimmer with the sheath on, in a dry room. Keep it out of reach of children. Never store the trimmer outdoors. -Clean the hedge trimmer and especially the cutter after use, and before putting the trimmer into storage for extended periods. Lightly oil the cutter and put on the sheath. The sheath supplied with the unit can be hung on the wall, providing a safe and practical way to store the hedge trimmer. Maintenance -Switch off the trimmer and disconnect and secure the mains plug before doing any maintenance work. -Make especially sure the cutter is undamaged and in good condition. -Regularly inspect the power cord for damage to the insulation. If the power cord is damaged, disconnect the mains plug. -Regularly clean the trimmer. -If the plastic housing is damaged, have the unit repaired by a qualified service technician immediately. Shock hazard! Danger of injury! Follow the accident-prevention instructions and recom mendations of your trade association or insurer. Do not make any modifications to the hedge trimmer. Doing so will only endanger your safety. Perform only the maintenance and repair works described in the instruction manual. All other work must be carried out by MAKITA Service. Use only original MAKITA spare parts and accessories. Using other than original MAKITA parts or accessories brings a high risk of accidents. We cannot accept any responsibility for accidents and damage resulting from non- MAKITA parts and accesories which have not been approved. First aid For the event of a possible accident, please make sure that a first aid kit is always immediately available close by. Immediately replace any items used from the first aid box. When calling for help, give the following information: -Place of the accident -What happened -Number of injured -Kind of injuries -Your name! NOTE Individuals with poor circulation who are exposed to excessive vibration may experience injury to blood vessels or the nervous system. Vibration may cause the following symptoms to occur in the fingers, hands or wrists: ”Falling asleep” (numbness), tingling, pain, stabbing sensation, alteration of skin colour or of the skin. If any of these symptoms occur, see a physician! 5 Working technique - Work only in good lighting and visibility. - Never work on an...
Este manual também é adequado para os modelos :Clippers - UH 5550 (1.6 mb)
Clippers - UH 4050, UH 4850, UH 5550, UH 6350 (1.6 mb)