Assessments - 2, GPA: 3.5
(
)
)
|
Facilidade de uso
Straight cut 009280 To trim the hedge straight, pull triggers A and B. Vertical cut 009281 Cut upwards with both hands pull the switch triggers B and C and move it in front of your body. Far area cut 009282 To trim the hedge in far area with both hands pull the switch triggers A and C. ASSEMBLY CAUTION: • Always be sure that the tool is switched off and unplugged before carrying out any work on the tool. Engage the extension cord CAUTION: • Make sure that the extension cord is unplugged to the mains outlet. 1 2 3 007542 When engaging the extension cord, secure it to the tool's cord with the hook complete. Attach the hook about 100 - 200 mm from the extension cord connector. This will help prevent unintentional disconnection. Waist cord hook CAUTION: • Do not attach the holder of waist cord hook to other than the extension cord. Do not attach it in a position closer to the tool beyond the hook complete. Failure to do so may cause an accident or personal injury. • When using the waist cord hook, use the extension cord as a standard equipment. Using an extension cord available in the market may cause an accident or injury. 1. Hook complete 2. Tool's cord 3. Extension cord 1. Switch trigger B 2. Switch trigger A 3. Switch trigger C • • Using the waist cord hook helps to minimizing a risk of cutting off the extension cord unexpectedly caused by the loose extension cord. 1234567 1. Hook 2. Tool 3. Tool's cord 4. Hook complete 5. Extension cord 6. Holder 7. Waist cord hook 009278 Press in or pull out the cord through the opening of the holder. 1. Holder 1 2. Cord 2 CAUTION: • Do not force the opening of the holder. Failure to do so may cause deflection and damage to it. Arm cord hook (Accessory) CAUTION: • Do not attach the holder of arm cord hook to other than the extension cord. Do not attach it in a position closer to the tool beyond the hook complete hooks. Failure to do so may cause an accident or personal injury. • When using the arm cord hook, use the extension cord as a standard equipment. Using an extension cord available in the market may cause an accident or injury. • Attach firmly one hook of the hook complete to the tool's cord and the other hook of hook complete to the extension cord. Working with the tool with a sole hook only attached may cause an accident and injury. Using the arm cord hook helps to minimize a risk of cutting off the extension cord unexpectedly caused by the loose extension cord. 12 1. Holder 2. Arm cord hook 009294 Attach firmly the arm cord hook placing around your arm and pass the extension cord through the holder. The length of the arm cord hook band is adjustable. NOTE: • Do not pass the extension cord through the band. • Do not force the opening of the holder. Failure to do so may cause deflection and damage to it. • Using the arm cord hook together with the waist cord hook is more helpful. OPERATION Refer to the Important Safety Instructions before operation. CAUTION: • When operating the trimmer, keep extension cord behind trimmer. Never drape it over hedge being trimmed. • Be careful not to accidentally contact a metal fence or other hard objects while trimming. The blade will break and may cause serious injury. • Overreaching with a hedge trimmer, particularly from a ladder, is extremely dangerous. Do not work from anything wobbly or infirm. 5 6 • Do not attempt to cut branches thicker than 10 mm diameter with this trimmer. These should first be cut with shears down to the hedge trimming level. 007559 CAUTION: • Do not cut off dead trees or similar hard objects. Failure to do so may damage the tool. Hold the trimmer with both hands pull the switch trigger A or B and move it in front of your body. 009413 When operating the hedge trimmer, keep extension cord behind trimmer. As a basic operation, tilt the blades towards the trimming direction and move it calmly and slowly at the speed rate of 3 - 4 seconds per meter. 009284 1 2 3 009285 To cut a hedge top evenly, it helps to tie a string at the desired hedge height and to trim along it, using it as a reference line. 009286 Attaching the chip receiver (accessory) on the tool when trimming the hedge straight can avoid cut off leaves' being thrown away. 009287 To cut a hedge side evenly, it helps to cut from the bottom upwards. 009288 Trim boxwood or rhododendron from the base toward the top for a nice appearance and good job. 009289 1. Trimming direction 2. Tilt the blades 3. Hedge surface to be trimmed Installing or removing chip receiver (accessory) Installing or removing chip receiver (accessory) CAUTION: • Always be sure that the tool is switched off and unplugged before installing or removing chip receiver. NOTE: • When replacing the chip receiver, always wear gloves so that hands and face does not directly contact the blade. Failure to do so may cause personal injury. • Always be sure to remove the blade cover before installing the chip receicer. • The chip receiver receives cut-off leaves and alleviates collecting thro...
Este manual também é adequado para os modelos :Clippers - HEDGE HT-355 (1.96 mb)
Clippers - HEDGE HT-365 (1.96 mb)