Assessments - 2, GPA: 3 ( )

Fabricante : Echo Arquivo Tamanho: 902.37 kb Arquivo Nome : Língua de Ensino:

This unit is not insulated against electrical current. Do not operate closer than 15 M (50 ft.) from electrical hazards. Plan retreat path from falling objects. Primer bulb DO NOT allow flames or sparks near fuel. Wear slip resistant foot wear. Keep bystanders at least 4.5 meters (15 feet) away. EQUIPMENT Before operation a complete check of the unit must be performed; • Check unit for loose/missing nuts, bolts and screws. Tighten and/or replace as needed. • Inspect fuel lines, tank and area around carburetor for fuel leaks. DO NOT operate unit if leaks are found. • Never adjust blades when the engine is operating. • Inspect hand guard for damage. Replace if damaged or missing. • Check that the blade assembly is firmly attached and in safe operating condition. Dull, loose or damaged blades should not be used. • ECHO, INC. will not be responsible for the failure of cutting devices or accessories which have not been tested and approved by ECHO for use with this unit. HEDGE CLIPPER OPERATOR'S MANUAL 5 FUEL WARNING DANGER Fuel is VERY flammable. Use extreme care when mixing, storing or handling or serious personal injury may result. • Use an approved fuel container. • DO NOT smoke near fuel. • DO NOT allow flames or sparks near fuel. • Fuel tanks/cans may be under pressure. Always loosen fuel caps slowly allowing pressure to equalize. • NEVER refuel a unit when the engine is HOT! • NEVER refuel a unit with the engine running. • DO NOT fill fuel tanks indoors. ALWAYS fill fuel tanks outdoors over bare ground. • Securely tighten fuel cap after refueling. • Inspect for fuel leakage. If fuel leakage is found, do not start or operate unit until leakage is repaired. IMPORTANT Spilled fuel is a leading cause of hydrocarbon emissions. Some states may require the use of automatic fuel shut-off containers to reduce fuel spillage. Contact your ECHO dealer for ordering information. After Refueling; • Wipe any spilled fuel from the unit. • Move at lease 3 m (10 ft.) from refueling location before starting the engine. After use; • DO NOT store a unit with fuel in its tank. Leaks can occur. Return unused fuel to an approved fuel storage container. 3 m (10 ft.) PERSONAL CONDITION AND SAFETY EQUIPMENT WARNING DANGER Hedge Clipper users risk injury to themselves and others if the hedge clipper is used improperly and or safety precautions are not followed. Proper clothing and safety gear must be worn when operating a hedge clipper. 6 6 Physical Condition - Your judgment and physical dexterity may not be good: • if you are tired or sick, • if you are taking medication, • if you have taken alcohol or drugs Operate unit only if you are physically and mentally well. Eye Protection - Eye protection that meet ANSI Z87.1 or CE requirements must be worn whenever you operate the Hedge Clipper. Hand Protection - Wear no-slip, heavy duty work gloves to improve your grip on the handles. Gloves also reduce the transmission of machine vibration to your hands. Hearing Protection - Wear hearing protection. ECHO recommends wearing hearing protection whenever unit is used. Proper Clothing - Wear snug fitting, durable clothing; • Pants should have long legs, shirts with long sleeves. • DO NOT WEAR SHORTS, • DO NOT WEAR TIES, SCARFS, JEWELRY. Wear protective hair covering to contain long hair. Wear sturdy work shoes with nonskid soles; • DO NOT WEAR OPEN TOED SHOES, • DO NOT OPERATE UNIT BAREFOOTED. Wear no-slip, heavy duty work gloves. Hot Humid Weather - Heavy protective clothing can increase operator fatigue which may lead to heat stroke. Delay heavy work until temperature drops. HEDGE CLIPPER OPERATOR'S MANUAL 7 SAFE OPERATION Determine Operation Area • Do not operate this product indoors or in inadequately ventilated areas. • Review the area to be trimmed. Look for hazards that could contribute to unsafe conditions. • Spectators and fellow workers must be warned, and children and animals prevented from coming nearer than 4.5 m (15 ft.) while the Hedge Clipper is in use. • Provide all users of this equipment with the Operator's Manual and instructions for Safe Operation. Operation Use Proper Clothing & Equipment • Before starting the unit, equip yourself and any other personworking within the 4.5 m (15 ft.) Safety Zone with the required Protective Equipment and clothing. Keep a Solid Stance • Maintain footing and balance at all times. Do not stand on slippery, uneven or unstable surfaces. Do not work in odd positions or on ladders. Do not over reach. Keep a Firm Grip • Hold the front and rear handles with both hands, with thumbs and fingers tightly encircling the handles. 4.5 m (15 ft.) Avoid Hot Surfaces • During operation, the complete unit, especially the power head, muffler area and cutting attachment may become very hot, too hot to touch. Avoid contact during and immediately after operation. 8 8 EXTENDED OPERATION/EXTREME CONDITIONS Vibration and Cold It is believed that a condition called Raynaud’s Phenomenon, which affects the fingers of ...

Baixe o seu

Para fazer o download, introduza 2 dígitos :