Assessments - 1, GPA: 5
(
)
)
|
Facilidade de uso
(Please make sure your IDE device and cable are compatible with ATA33) IDE2 Conductor Cable Auto BIOS autodetects IDE2 conductor cable. (Default Value) ATA66/100/133 Set IDE2 Conductor Cable to ATA66/100/133. (Please make sure your IDE device and cable are compatible with ATA66/100/133) ATA33 Set IDE2 Conductor Cable to ATA33. (Please make sure your IDE device and cable are compatible with ATA33) On-Chip Primary PCI IDE Enabled Enable onboard 1st channel IDE port. (Default value) Disabled Disable onboard 1st channel IDE port. On-Chip Secondary PCI IDE Enabled Enable onboard 2nd channel IDE port. (Default value) Disabled Disable onboard 2nd channel IDE port. AC97 Audio Enabled Enable AC97 audio function. (Default value) Disabled Disable AC97 audio function. "*" Only for GA-8S661GXMP GA-8S661GXMP(-C) Motherboard - 34 English Onboard LAN device* Enabled Enable Onboard LAN device function. (Default value) Disabled Disable this function. USB Controller Enabled Enable USB Controller. (Default value) Disabled Disable USB Controller. USB Legacy Support Enabled Enable USB Legacy Support. Disabled Disable USB Legacy Support. (Default value) Onboard Serial Port 1 Auto BIOS will automatically setup the Serial port 1 address. 3F8/IRQ4 Enable onboard Serial port 1 and address is 3F8/IRQ4. (Default value) 2F8/IRQ3 Enable onboard Serial port 1 and address is 2F8/IRQ3. 3E8/IRQ4 Enable onboard Serial port 1 and address is 3E8/IRQ4. 2E8/IRQ3 Enable onboard Serial port 1 and address is 2E8/IRQ3. Disabled Disable onboard Serial port 1. Onboard Serial Port 2 Auto BIOS will automatically set up the Serial port 2 address. 3F8/IRQ4 Enable onboard Serial port 2 and address is 3F8/IRQ4. 2F8/IRQ3 Enable onboard Serial port 2 and address is 2F8/IRQ3. (Default value) 3E8/IRQ4 Enable onboard Serial port 2 and address is 3E8/IRQ4. 2E8/IRQ3 Enable onboard Serial port 2 and address is 2E8/IRQ3. Disabled Disable onboard Serial port 2. Onboard Parallel Port Disabled Disable onboard LPT port. 378/IRQ7 Enable onboard LPT port and address is 378/IRQ7. (Default value) 278/IRQ5 Enable onboard LPT port and address is 278/IRQ5. 3BC/IRQ7 Enable onboard LPT port and address is 3BC/IRQ7. Parallel Port Mode SPP Use Parallel port as Standard Parallel Port. EPP Use Parallel port as Enhanced Parallel Port. ECP Use Parallel port as Extended Capabilities Port. (Default value) ECP+EPP Use Parallel port as ECP & EPP mode. ECP Mode Use DMA This option is available only when Parallel Port Mode is set to ECP or ECP+EPP. 3 Set ECP Mode Use DMA to 3. (Default value) 1 Set ECP Mode Use DMA to 1. "*" Only for GA-8S661GXMP -35 -BIOS Setup English 2-4 Power Management Setup CMOS Setup Utility-Copyright (C) 1984-2005 Award Software Power Management Setup ACPI Suspend Type Soft-Off by PWR_BTTN System After AC Back IRQ [3-7, 9-15], NMI ModemRingOn PME Event Wake Up Power On by Keyboard Power On by Mouse Resume by Alarm x Month Alarm x Day(of Month) x Time(hh:mm:ss) Power LED in S1 state [S1(POS)] [Off] [Off] [Enabled] [Enabled] [Enabled] [Disabled] [Disabled] [Disabled] NA E v eryday 0 : 0 : 0 [Blinking] Item Help Menu Level • [S1] Set suspend type to Power On Suspend under ACPI OS [S3] Set suspend type to Suspend to RAM under ACPI OS ........: Move Enter: Select F5: Previous Values +/-/PU/PD: Value F10: Save F6: Fail-Safe Defaults ESC: Exit F1: General HelpF7: Optimized Defaults ACPI Suspend Type S1(POS) Set ACPI suspend type to S1/POS (Power On Suspend). (Default value) S3(STR) Set ACPI suspend type to S3/STR (Suspend To RAM). Soft-Off by PWR-BTTN Off Press power button to turn off the system instantly. (Default value) Suspend Press power button for 4 seconds to turn off the system. The system will enter suspend mode if the button is pressed for less than 4 seconds. System After AC Back Off When AC-power is back to the system, the system will be in "Off" state. (Default value) On When AC-power is back to the system, the system will be always in "On" state. Laststate When AC-power is back to the system, the system will return to the last state before AC-power was off. IRQ [3-7, 9-15], NMI When IRQ [3-7, 9-15] or NMI triggered, the suspend timer will be reloaded to prevent system from getting into green mode. Disabled Don’t monitor IRQ [3-7, 9-15] or NMI. Enabled Monitor IRQ [3-7, 9-15] or NMI.(Default value) ModemRingOn Disabled Disable ModemRingOn function. Enabled Enable ModemRingOn function.(Default value) GA-8S661GXMP(-C) Motherboard - 36 English PME Event Wake Up This feature requires an ATX power supply that provides at least 1A on the 5VSB lead. Disabled Disable this function. Enabled Enable PME Event Wake up. (Default value) Power On By Keyboard Password Enter one to five characters to set the Keyboard Power On password. Disabled Disabled this function. (Default value) Any Key Press any key to turn on the computer. Power On By Mouse Disabled Disable this function. (Default value) Enabled Move or click the left button of the PS/2 mouse to turn on the computer. Res...