Assessments - 3, GPA: 5
(
)
)
|
Facilidade de uso
To ensure safety, unplug mixer from electrical outlet before inserting or removing attachments. This mixer comes with 1 or more of the following attachments: ATTACHMENT DESCRIPTION The flat beaters are designed for general mixing purposes. The straight wire beaters, which have no center post for ease in cleaning, are designed for mixing thick batters and cookie dough. The single whisk is perfect for whipping cream. The whisk may be inserted into either opening. 3 840162200 ENv02.qxd 4/2/07 1:38 PM Page 4 Optional Attachments and Features (continued) ATTACHMENT DESCRIPTION The twisted wire beaters, which have no center post for ease in cleaning, are designed for mixing thick batters and cookie dough. The dough hooks can perfectly knead a one loaf bread recipe. Always use dough hooks on speed 4, 5, or 6. Power Burst Press and hold down the button for additional power at any speed. NOTE: Do not use Power Burst for more than two minutes at a time or motor may overheat. Bowl Rest™ This feature can be used on most large CAUTION: mixing bowls. Use the Bowl Rest while adding ingredients or checking a recipe. To use, TURN MIXER OFF, then set the mixer on the edge of the bowl. • Never use Bowl Rest when the mixer is on. • Do not use Bowl Rest on small (11.2 quart) mixing bowls or plastic mixing bowls. Snap On Case When finished using the mixer, clean as instructed. Then store the cord in the snap on storage case along with the accessories. To remove snap on case, squeeze the case on both sides (toward the back of the case) and pull down. Cord Wrap and Clip The mixer can also be stored separately from the snap on case. When finished using the mixer, clean as instructed. Then wrap cord around mixer body as illustrated and secure cord in clip. 4 840162200 ENv02.qxd 4/2/07 1:38 PM Page 5 To Insert Attachments Flat Beaters, Straight Wire Beaters and Whisk 1. Make sure mixer is unplugged and speed control is set to OFF. 2. Insert a beater or attachment into an opening on the bottom of the mixer. Push until it clicks into place. Repeat with other beater or attachment. Twisted Wire Beaters and Dough Hooks 1. Insert the wire beater or the dough hook with the collar into the opening indicated by the illustration on the mixer. Collar 2. Align tabs on the beater or dough hook with the slots in the opening. Push until it clicks into place. Repeat with other beater or dough hook. Tab Slot Using Your Mixer 1. Make sure mixer is unplugged and speed control is set to 0 (OFF). Insert beaters. 2. Plug mixer into electrical outlet. Place beaters into bowl. 3. Move the speed control to desired speed, starting at 1 and increasing to a higher speed as necessary. 4. When finished mixing, move the speed control to 0 (OFF) and unplug mixer. 5. To eject beaters, push straight down on the eject button. 5 840162200 ENv02.qxd 4/2/07 1:38 PM Mixing Guide Page 6 The following mixing guide is a suggestion for selecting mixing speeds for the 6 speed mixers. Begin on speed 1 and increase to desired speed depending on the recipe consistency. 6 SPEED FUNCTION 0 OFF and/or Eject 1 LOW speed for folding or mixing in dry ingredients, muffins, or quick breads 2 To cream butter and sugar; most cookie dough 3 MEDIUM speed for most packaged cake mixes 4 Frosting and mashed potatoes; kneading dough 5 Beating egg whites; kneading dough 6 HIGH speed for whipping cream; kneading dough Mixing Tips Cookie dough is one of the thickest doughs to mix. Make it easier by following these tips: • Use a large mixing bowl so that ingredients spread out for easier mixing. • Have butter or margarine at room temperature. • Add ingredients one at a time and thoroughly mix after each addition. • Add flour one cup at a time. • To add chips or nuts to a very thick dough or batter, we recommend stirring them in by hand at the very end of the recipe. 6 840162200 ENv02.qxd 4/2/07 1:38 PM Page 7 Cleaning Your Mixer 1. Always turn off and unplug mixer NOTE: Do not use abrasive cleaners from electrical outlet before ejecting or scouring pads. To reduce the risk the attachments. of electrical shock do not immerse the mixer body or cord in water or other water; rinse and dry. 2. Wash attachments in hot, soapy liquid. 3. Wipe the mixer body and cord with a clean, damp cloth. Customer Service If you have a question about your hand mixer, call our toll-free customer service number. Before calling, please note the model, type, and series numbers and fill in that information below. These numbers can be found on the bottom of your hand mixer. This information will help us answer your question much more quickly. MODEL: ______________ TYPE: _______________ SERIES: _________________ This warranty applies to products purchased in the U.S. or Canada. LIMITED WARRANTY This product is warranted to be free from defects in material and workmanship for a period of one (1) year from the date of original purchase, except as noted below. During this period, we will repair or replace this product, at our opti...