If an overload occurs, the driver breaks instead. However, the driver can easily be replaced. Otherwise spare parts with a predeterminedbreaking point are not a component of our warranty obligations. Such spare parts can be purchased from customer service (order no. 753348). Operation Risk of injury! Do not insert mains plug until all preparations for working withthe appliance are complete. • Before operating the appliance andaccessories for the first time, clean thoroughly; see “Cleaning and se

• Turn shredding attachment upwards until it engages. • Attach filling tray. • Place a bowl or plate under the outlet opening. • Insert the mains plug. • Place the food to be processedin the feed tube. • Insert pusher and hold in place. Note: Pusher can be inserted in one direction only. Note position of the curve! • Switch on the appliance (I). • Press food down using the pusher. Do not exert too much pressure! After using the appliance: • Switch off the appliance (0). • Remove mains plug. • Pu

Troubleshooting Fault Appliance stops but does not switch off. Cause Appliance overloaded, e.g. mincer blocked. Remedial action • Switch appliance off and wait until it comes to a standstill. • Remove mains plug. • Remove mincer attachment and remove blockage. • Switch on appliance again. Fault Mincer attachment stops but the appliance does not switch off. Cause Driver is broken because the appliance was severely overloaded (e.g. by bones). Remedial action • Replace driver (see „Predetermined br