Log:
Assessments - 4, GPA: 3.8 ( )

Instruções de Operação Nilfisk-ALTO, Modelo C 105.5

Fabricante : Nilfisk-ALTO
Arquivo Tamanho: 1.1 mb
Arquivo Nome : UM_C105.5_C115.3_EN.pdf
Língua de Ensino: en
Ir para baixar



Facilidade de uso


Children should be supervised to ensure that they do not play with the appliance. Before starting up your machine please check it carefully for any defects. If you find any, do not start up your machine and contact your Nilfi sk distributor. Before starting up your high- pressure washer for the first time, this instruction manual must be read through carefully. Save the instructions for later use. Safety instructions marked with this symbol must be observed to pre vent danger to persons. Especially check: • The insulation of the electric cable should be faultless and without any cracks. If the electric cable is damaged, an authorized Nilfisk di stributor should replace it. WARNING! • High pressure jets can be dangerous. Never direct the water jet at persons, pets, live electrical equipment or the machine itself. • Never try to clean clothes or footwear on yourself or other persons. • Hold the spray lance firmly with both hands. The spray lance is affected by a thrust of up to 16.4 N during ope– • This symbol is used to mark safety to prevent damage must be observed .instructions that to the machine and its performance. This symbol indicates tips and instructions to simplify work and to ensure a safe operation. ration. • The operator and anyone in the immediate vicinity of the site of cleaning should take action to protect themselves from being struck by debris dislodged during operation. Wear goggles and protection clothes during operation. • This appliance has been designed for use with cleaning agents supplied or recommended by the manufacturer. The use of other cleaning agents or chemicals may adversely affect the safety of the appliance. • Disconnect from electrical power supply before carrying out user maintenance. • To ensure the appliance 3 ENEN Nilfisk C 105.5 / C 115.3 safety only use original spare parts from the manufacturer or approved by the manufacturer. .High pressure hoses, fittings and couplings are important for the safety of the appliance. Only use hoses, fittings and couplings recommended by the manufacturer. .Do not use the appliance if a supply cord or important parts of appliance are damaged, e.g. safety device , high pressure hose and trigger gun. .The appliance is intended to clean cars and garden etc.. .Appropriate ear protection has to be used. .Never use the machine in an environment where there could be a danger of explosion. If any doubt arises, please contact the local authorities. .It is not allowed to clean asbestos- containing surfaces with high pressure. .This high pressure washer must not be used at temperatures below 0°C. WARNING! Inadequate extension cables can be dangerous. Cables on drums should always be completely unwinded to prevent the cable from overheating. If an extension cable is used, the plug and the socket must be waterproof and comply with the below-mentioned requirements for length and cable dimen sions. 1.0 mm. max. 12.5 m 1.5 mm. max. 20 m 2.5 mm. max. 30 m .If the electric cable is damaged, it must be replaced by the manufacturer or his service agent or similarly qualified person in order to avoid a hazard. Mains power connection The following should be observed when connecting the high pressure washer to the electric installation: .The electric installation shall be made by a certified electrician and comply with IEC 364. .It is recommended that the electric supply to this appliance should include either a residual current device that will interrupt the supply if the leakage current to earth exceeds 30 mA for 30 ms. Water connection .Connection to the public mains according to regulations. .Inlet hose can be connected to the water mains with a max. inlet pressure of 10 bars. This high pressure washer is only allowed to be connected with the drinking water mains, when an appropriate backflow pre- venter has been installed, Type BA according to EN 1717. The backfl ow preventer can be ordered under number 106411177. The length of the hose between the backflow preventer and the high pressure washer must be at least 10 metres to absorb possible pressure peaks (min diameter . inch). Operation by suction (for example from a rainwater vessel) is carried out without backflow preventer. Recommended suction set: 126411387. As soon as water has fl own through the BA valve, this water is not considered to be drinking water any more. IMPORTANT! Only use water without any impurities. If there is a risk of running sands in the inlet water (i.e. from your own well), an additional filter should be mounted. Safety devices .The unloader valve can reduce pressure if it exceeds pre-set values. Locking device on spray handle (7a) (see illustration at the end of this manual): The spray handle features a locking device. When the pawl is activated, the spray handle cannot be ope rated. Thermal sensor: A thermal sensor protects the motor against overloading. The machine will restart after a few minutes when the thermal sensor has cooled. 4 Nilfisk C 105.5 / C 115.3 2 Descriptio...

Este manual também é adequado para os modelos :
Equipamento de lavagem - C 115.3 (1.1 mb)

Escreva a sua própria avaliação do dispositivo



Mensagem
Seu nome :
Introduza os dois dígitos :
capcha





categorias