Assessments - 5, GPA: 3.6
(
)
)
|
Facilidade de uso
Cable attenuation should also be considered on long cable runs and adequate video signal levels made available. Features This device is a Multi-scanning Color Video/Data Monitor newly developed for computer information display and other multiple purpose signal sources. This new Color Video/Data Monitor can present a high-fidelity computer screen to meet various needs in our highly information oriented society. Wide-range computer compatibility • Compatibility with all PC signals which satisfy the range shown below. Horizontal scanning frequency (fH): 15 ~ 50kHz Vertical scanning frequency (fv): 50- 100 Hz Horizontal blanking time: 15.0 - 36.0 kHz ............ S.Ojlis. (Typical) 37.0 - 50 kHz ............... 4.Ops. (Typical) Vertical blanking time: 0.45 ms. (Typical) • It can adjust automatically and continuously to the Input signal when driven with any standard IBM PC/XT/AT color graphics adaptor, IBM PS/2 or compatible board. Superb resolution and bright picture • High resolution: RGB ................... 1120 x 768 dots. Video.................. 600 TV lines. (S-VIDEO) *RGB character reproduction: equivalent to 4000 characters. CRT ...................0.28 mm dot-pitch. Equipped with many adjustment functions for RGB input • For each input mode, image size and horizontal position adjustments can be made. • RGB input terminal is equipped with a loop-through output terminal for easy connection of additional system components. Supports superimpose function for text broadcasts • During RGB mode operation, externally controlled superimpose inputs can be used. 3-mode preset memory • H/V-position and H/V*size settings memorized for two RGB input modes, and contrast, brightness, tint, and color settings for one Video input mode. • The two RGB memories can be switched with the AV control signals: Hi/Low. For the switching mode, see page 10. — 4 — Locations Front Controls (5) Control Switch (6) Control Mode Select Switch ©Control Indicator (8) NORMAL Button - VIDEO _IFPNC51_f Hsioe-nnH - ■y'jrCONTHASTi TbRIGHtT- r—TINT —l r-COLOR-} O1’ -Q -Q ©Control Buttons (4) Input Selection Button (RGB MULTI/VIDEO) (3) Input Selection Button (VIDEO/S-VIDEO) Rear Terminals AC Inlet S-VIDEO IN Terminal 11 VIDEO IN Terminal [2 AUDIO IN Terminal [3 RGB MULTI IN/OUTS Terminals RGB Impedance Switch (5. — 5 — Operations Front Controls (D Power Switch Push this switch to turn the monitor ON/OFF. When the power is ON, one of the Input Mode Indicators light. (2) Input Mode Indicators When the power is ON, the selected input mode is indicated. ® Input Selection Button (VIDEO/S-VIDEO) Push this button to select S-VIDEO or VIDEO input. O This function is only available when VIDEO input was selected with Input Selection Button (RGB MULTI/VIDEO). • Selected input mode is shown on the Input Mode Indicators (D. @ Input Selection Button (RGB MULTI/VIDEO) Push this button to select VIDEO or RGB MULTI input. • Selected input mode is indicated on the Input Mode Indicators ©. • When the RGB MULTI is selected, it is able to select RGB or VIDEO signal within the RGB terminal by using YS signal through the RGB terminal. • When the VIDEO is selected, VIDEO or S-VIDEO input will appear due to the condition of the Input Selection Button (VIDEO/S-VIDEO). (see page 9-10) Set this switch to OFF position to prevent unexpected changes of the adjustments. ON ... All controls can be operated. OFF.. Only power on/off and input selection can be operated. Control Switch (§) Control Mode Select Switch Set this switch to determine which adjustments will be done. FUNC-1 ..... Picture and Volume I FUNC-2I..... Size, Position and Side-plncushion FUNC-1 [ FUN cm — 6 — Operations (£) Control Indicator While a control adjustment is being made, this indicator blinks. When the adjustment level reaches the max/min, this indicator stays lit. Push this button to return the adjustment level to the factory presettings. Use an adjustment screwdriver or tool to push this button. In the control off condition, this has no effect. By using each +/- buttons, the adjustment can be done in 64 steps. The adjustment levels are memorized for each input mode. In the control off condition, these adjustment have no effect. • Function-1 Picture and Volume Set the Control Mode Select Switch to FUNC-1 position. Brightness adjustment — Dark + — Bright Color adjustment (ineffective at RGB) — Low color + ■•• High color Contrast adjustment — Decrease + ■•■ Increase Tint adjustment (ineffective at RGB) Red + Green Volume Control .-VOLUME-] — Decrease T^SiDETiSH + ■■■ Increase • Function-2 Size, Position and Side-pincushion Set the Control Mode Select Switch to the | FUNC-21 position. Horizontal position adjustment (ineffective at VIDEO) r- BRIGHT -Q 3 + Horizontal size adjustment r—TINT — -Q. S k —Tv-posTI— r Vertical position adjustment Vertical size adjustment Side-pincushion adjustment — 8...