Assessments - 5, GPA: 4.2 ( )

Fabricante : AMX Arquivo Tamanho: 4.45 mb Arquivo Nome : Modero.CV7.OperationReferenceGuide.pdf Língua de Ensino:

Example: SEND_COMMAND Panel,"'*BCB-500.504&510,1,12'" Sets the Off state border color to 12 (Yellow). Colors can be set by Color Numbers, Color name, R,G,B,alpha colors (RRGGBBAA) and R, G & B colors values (RRGGBB). Refer to theRGB Values for all 88 Basic Colors table on page 139. ABCF Set the fill color to the specified color. Only if the specified fill color is not the same as the current color. Note: Color can be assigned by color name (without spaces), number or R,G,B value (RRGGBB or RRGGBBAA). Syntax: "'^BCF-,,'" Variable: variable text address range = 1 - 4000. button states range = 1 - 256 for multi-state buttons (0 = All states, for General buttons 1 = Off state and 2 = On state). color value = Refer to theRGB Values for all 88 Basic Colors table on page 139 for more information. Example: SEND_COMMAND Panel,"'*BCF-500.504&510.515,1,12'" SEND_COMMAND Panel,"'*BCF-500.504&510.515,1,Yellow'" SEND_COMMAND Panel,"'*BCF-500.504&510.515,1,#F4EC0A63''" SEND_COMMAND Panel,"'*BCF-500.504&510.515,1,#F4EC0A'" Sets the Off state fill color by color number. Colors can be set by Color Numbers, Color name, R,G,B,alpha colors (RRGGBBAA) and R, G & B colors values (RRGGBB). 7" Modero Touch Panels Programming "A" Button Commands (Cont.) abct Set the text color to the specified color. Only if the specified text color is not the same as the current color. Note: Color can be assigned by color name (without spaces), number or R,G,B value (RRGGBB or RRGGBBAA). Syntax: "'^BCT-,,'" Variable: variable text address range = 1 - 4000. button states range = 1 - 256 for multi-state buttons (0 = All states, for General buttons 1 = Off state and 2 = On state). color value = Refer to theRGB Values for all 88 Basic Colors table on page 139 for more information. Example: SEND_COMMAND Panel,"'*BCT-500.504&510,1,12'" Sets the Off state border color to 12 (Yellow). Colors can be set by Color Numbers, Color name, R,G,B,alpha colors (RRGGBBAA) and R, G & B colors values (RRGGBB). ABDO Set the button draw order. Determines what order each layer of the button is drawn. Syntax: "'^BDO-,,<1-5><1-5><1-5><1-5><1-5>'" Variable: variable text address range = 1 - 4000. button states range = 1 - 256 for multi-state buttons (0 = All states, for General buttons 1 = Off state and 2 = On state). layer assignments = Fill Layer = 1 Image Layer = 2 Icon Layer = 3 Text Layer = 4 Border Layer = 5 Note: The layer assignments are from bottom to top. The default draw order is 12345. Example: SEND_COMMAND Panel,"'*BDO-530,1&2,51432'" Sets the button's variable text 530 ON/OFF state draw order (from bottom to top) to Border, Fill, Text, Icon, and Image. Example 2: SEND_COMMAND Panel,"'*BDO-1,0,12345'" Sets all states of a button back to its default drawing order. ABFB Set the feedback type of the button. ONLY works on General-type buttons. Syntax: "'^BFB-,'" Variable: variable text address range = 1 - 4000. feedback type = (None, Channel, Invert, On (Always on), Momentary, and Blink). Example: SEND_COMMAND Panel,"'*BFB-500,Momentary'" Sets the Feedback type of the button to 'Momentary'. 146 7" Modero Touch Panels Programming "A" Button Commands (Cont.) ABIM Set the input mask for the specified address. Syntax: "'*BIM-,'" Variable: variable text address range = 1 - 4000. input mask = Refer to the Text Area Input Masking section on page 184 for character types. Example: SEND_COMMAND Panel,"'^BIM-500,AAAAAAAAAA'" Sets the input mask to ten 'A' characters, that are required, to either a letter or digit (entry is required). ABLN Set the number of lines removed equally from the top and bottom of a composite video signal. The maximum number of lines to remove is 240. A value of 0 will display the incoming video signal unaffected. This command is used to scale non 4x3 video images into non 4x3 video buttons. Syntax: "'^BLN-,,'" Variable: variable text address range = 1 - 4000. button states range = 1 - 256 for multi-state buttons (0 = All states, for General buttons 1 = Off state and 2 = On state). number of lines = 0 - 240. Example: SEND_COMMAND Panel,"'*BLN-500,55'" Equally removes 55 lines from the top and 55 lines from the bottom of the video button. 7" Modero Touch Panels 147 Programming ^148 " Button Commands (Cont.) ABMC Button copy command. Copy attributes of the source button to all the destination buttons. Note that the source is a single button state. Each state must be copied as a separate command. The section represents what attributes will be copied. All codes are 2 char pairs that can be separated by comma, space, percent or just ran together. Syntax: "'^BMC-,,,,,'" Variable: variable text addres...

Baixe o seu

Para fazer o download, introduza 2 dígitos :