Assessments - 2, GPA: 4
(
)
)
|
Facilidade de uso
• regularly check the door seals and wipe clean to ensure they are clean and free from debris. • rinse and dry thoroughly. Do not pull, move or damage any pipes and/or cables inside the cabinet. Never use detergents, abrasive powders, highly perfumed cleaning products or wax polishes to clean the interior as this will damage the surface and leave a strong odour. Clean the condenser (black grill) and the compressor at the back of the appliance with a brush. This operation will improve the performance of the appliance and save energy consumption. Take care of not to damage the cooling system. When moving the cabinet, lift it by the front edge to avoid scratching the floor. Many proprietary kitchen surface cleaners contain chemicals that can attack/damage the plastics used in this appliance. For this reason use a soft cloth rinsed in warm water and neutral soap emulsion for cleaning external surfaces. Do not use detergents or abrasive paste as these will damage the paint, or stainless steel anti finger print coating. After cleaning, reconnect the equipment to the mains supply. Cleaning the ventilation grille The ventilation grille can be removed for washing. What to do if… 13 Make sure the door is open and then: 1. Loosen the upper edge of the grille by pulling outward/downward. 2. Pull the grille straight out to completely remove it. 3. Vacuum clean under the cabinet. Defrosting of the freezer The freezer compartment of this model, on the other hand, is a "no frost" type. This means that there is no buildup of frost when it is in operation, neither on the internal walls nor on the foods. The absence of frost is due to the continuous circulation of cold air inside the compartment, driven by an automatically controlled fan. Periods of non-operation When the appliance is not in use for long periods, take the following precautions: 1. disconnect the appliance from electricity supply 2. remove all food 3. clean the appliance and all accessories 4. leave the door/doors open to prevent unpleasant smells. If the cabinet will be kept on, ask somebody to check it once in a while to prevent the food inside from spoiling in case of a power failure. WHAT TO DO IF… During operation of the appliance some smaller but annoying trouble can often occur, which does not require calling a technician out. In the following chart information is given about them to avoid unnecessary charges on service. The operation of the appliance goes with certain sounds (compressor and circulating sound). This not means a trouble, but a normal operation. The appliance operates discontinuously, so the stopping of compressor does not mean being no current. That is why you must not touch the electrical parts of the appliance before breaking the circuit. Problem Possible cause Solution The appliance is noisy. The appliance is not supported properly. Check if the appliance stands stable (all feet and wheels should be on the floor). Refer to "Levelling". The buzzer sounds. The Alarm icon flashing. The temperature in the freezer is too high. Refer to "HighTemperature Alarm". 14 14 What to do if… Problem Possible cause Solution The door is not closed correctly. Refer to "Door open alarm". An error has occurred in meas- Call your service representative upper or lower square uring the temperature. (the cooling system will continue is shown in the tempera- to keep food products cold, but temperature adjustment will not be possible). ture display. “dEMo” appears on the The appliance is in demonstra-Keep pressed approximately 10 display. tion mode. sec the OK button since a long sound of buzzer is heard and the display shut off for a short while: appliance start works regularly. The compressor runs con-The Temperature regulator may Set a warmer temperature. tinuously. be set incorrectly. The door is not closed correctly. Refer to "Closing the door". The door has been opened too Do not keep the door open longer frequently. than necessary. The food temperature is too Let the food temperature de- high. crease to room temperature before storage. The room temperature is too Decrease the room temperature. high. There is too much frost The door is not closed correctly. Refer to "Closing the door". and ice. The door gasket is deformed or Refer to "Closing the door". dirty. The temperature in the The Temperature regulator may Set a warmer temperature. appliance is too cold. be set incorrectly. The temperature in the The Temperature regulator may Set a colder temperature. appliance is too warm. be set incorrectly. The door is not closed correctly. Refer to "Closing the door". The food temperature is too Let the food temperature de- high. crease to room temperature before storage. The temperature in the Food is too near to each other. Store food so that there is cold freezer is too warm. air circulation. Large quantities of food to be Insert smaller quantities of food frozen were put in at the same to be frozen at the same time. time. The appliance does not The appliance...
Este manual também é adequado para os modelos :Freezers - EN AGN2901 (526.71 kb)