Assessments - 3, GPA: 4
(
)
)
|
Facilidade de uso
Cleaning discs Fingerprints and dust on the disc can cause poor picture quality and sound distortion. Before play- ing, clean the disc with a clean cloth. Wipe the disc from the center outward. Do not use strong solvents such as alcohol, benzine, thinner, commercially available cleaners, or anti-static spray intended for older vinyl records. Notes on Tapes Preventing record Removing the tab(s) of the cassette (with a small screwdriver) will prevent accidental erasure. To record again, cover the hole of the tab with an adhesive tape. Note Before use Adhesive tape Side A Tab for side B Tab for side A Front / Back Panel 13 1 2 12 3 11 10 4 9 5 8 6 7 1. DISPLAY WINDOW 2. 1 11 /] ]] (POWER) 3. bB/[] PLAY(PAUSE) 4. • m mm (CD SKIP/SEARCH) (FAST REWIND PLAY) • TUNE.- 5. • PORT.IN jack • (Headphone jack) : 3.5mm 6. • FUNCTION (FM, AM, CD, USB, AUX, PORTABLE, TAPE) • XDSS plus • PLAY MODE ST./MONO • CD SYNC • Z CD OPEN (DEMO) 14 15 16 7. Z PUSH EJECT position 8. (USB connector) 9. • M MM (CD SKIP/SEARCH) (FAST FORWARD PLAY) • TUNE.+ 10. VOLUME CONTROL KNOB 11. x STOP 12. • TIMER • CLOCK • SET (RDS - OPTIONAL) 13. DISC TRAY 14. AM/FM ANTENNA TERMINAL 15. AUX IN (AUXILIARY INPUT) connector 16. POWER IN (POWER CORD) 17. SPEAKER TERMINAL Before use 5 Remote Control battery installation Detach the battery cover on the rear of the remote control, and insert two R03 (size AAA) batteries with 3 and # aligned correctly. Caution Do not mix old and new batteries. Never mix different types of batteries (standard, alkaline, etc.). Remote Control Operation Range Point the remote control at the remote sensor and press the buttons. • Distance : About 23 ft (7 m) from the front of the remote sensor. • Angle : About 30° in each direction of the front of the remote sensor. Remote Control AAAAAA 3 # POWER PRESET/FOLDER( ) SLEEP CD FUNCTION BB/[] (PLAY/PAUSE) • x (CD STOP) • .bbbb/BBBB>(CD SKIP/SEARCH)• TUN.-/+ • REPEAT • D.SKIP XTS Pro • XDSS plus • EQ master • RDS (Radio Data System) FUNCTION RDS : OPTIONAL • PTY : OPTIONAL • PTY SEARCH : OPTIONAL • / DIMMER MUTE • USB • FUNCTION VOLUME ( ) CLOCK PROGRAM/MEMO TAPE FUNCTION • bb (BACKWARD PLAY) • BB (FORWARD PLAY) • mm (FAST REWIND PLAY) • MM (FAST FORWARD PLAY) • z/[] (RECORD/RECORD PAUSE) • x (TAPE STOP) RANDOM MP3 Info (MP3/WMA file information display) NUMERIC / 5 Remote Control battery installation Detach the battery cover on the rear of the remote control, and insert two R03 (size AAA) batteries with 3 and # aligned correctly. Caution Do not mix old and new batteries. Never mix different types of batteries (standard, alkaline, etc.). Remote Control Operation Range Point the remote control at the remote sensor and press the buttons. • Distance : About 23 ft (7 m) from the front of the remote sensor. • Angle : About 30° in each direction of the front of the remote sensor. Remote Control AAAAAA 3 # POWER PRESET/FOLDER( ) SLEEP CD FUNCTION BB/[] (PLAY/PAUSE) • x (CD STOP) • .bbbb/BBBB>(CD SKIP/SEARCH)• TUN.-/+ • REPEAT • D.SKIP XTS Pro • XDSS plus • EQ master • RDS (Radio Data System) FUNCTION RDS : OPTIONAL • PTY : OPTIONAL • PTY SEARCH : OPTIONAL • / DIMMER MUTE • USB • FUNCTION VOLUME ( ) CLOCK PROGRAM/MEMO TAPE FUNCTION • bb (BACKWARD PLAY) • BB (FORWARD PLAY) • mm (FAST REWIND PLAY) • MM (FAST FORWARD PLAY) • z/[] (RECORD/RECORD PAUSE) • x (TAPE STOP) RANDOM MP3 Info (MP3/WMA file information display) NUMERIC / Connection Speaker System Connection Connect the speaker cables to the speaker terminal. Front speaker (Right) Front speaker (Left) RED BLACK Notes: • Be sure to match the speaker cable to the appropriate terminal on the components: + to + and – to –. If the cords are reversed, the sound will be distorted and will lack base. • If you use front speakers with low maximum input rating, adjust the volume carefully to avoid excessive output on the speaker. • Connect the Left/Right speaker correctly. If it is reversed, the sound may be distorted. Antenna (Aerial) Connection Auxiliary Function Connect the supplied FM/AM antennas for Connect an auxiliary device such as a TV or radio reception. VCR via the rear mounted AUX connector and press FUNCTION repeatedly to select AUX. FM wire antenna (supplied) AM(MW) loop antenna (aerial) (supplied) For AM(MW) reception, connect the loop antenna (aerial) to the terminal marked AM. Auxiliary Device To AUDIO out AUX IN Notes: Note: • To prevent noise pickup, keep the AM loop antenna away from the unit and other compo- Turn the unit off and then connect an auxiliary device, or it may cause a noise. nents. • Be sure to fully extend the FM wire antenna. • After connecting the FM wire antenna, keep it as horizontal as possible. 6 Operation Basic Operation Headphone jack Connect a headphone plug ( 3.5 mm) into the jack to listen to the sound through headphones. Connecting headphones (not supplied) will switch off the speakers. MUTE Press MUTE to temporarily stop the sound. The “ ” indicator flashes on display window. To cancel it, press VOLUME ...