Assessments - 3, GPA: 4.7
(
)
)
|
Fotos e especificações Sony CMT-CPX11 |
por este dispositivo também tem outras instruções :
Facilidade de uso
3 Press +/– (or turn TUNING +/– on the unit) repeatedly to tune in the desired station. 4 Press TUNER MEMORY. 5 Press +/– (or turn TUNING +/– on the unit) repeatedly to select the desired preset number. 6 Press ENTER. 7 Repeat steps 3 through 6 to preset other stations. Other operations To Do this Tune in a station Follow the procedure described with a weak signal in “Manual tuning preset” (page 11). Set another station After step 4, press +/– (or turn to the existing TUNING +/– on the unit) preset number repeatedly to select the preset number you want to store the station. Tuner continued 11GB To change the AM tuning interval (except for European models) The AM tuning interval is factory-preset to 9 kHz (or 10 kHz for some areas). To change the AM tuning interval, tune in any AM station first, then turn off the system. While holding TUNING +, press ?/1 on the unit. When you change the interval, all the AM preset stations are erased. To reset the interval, repeat the same procedure. Note You cannot change the AM tuning interval in Power Saving Mode. Tips • The preset stations are retained for about half a day even if you disconnect the mains lead or if a power failure occurs. • To improve the reception, adjust the supplied antennas or connect an external antenna. To improve tuner reception When tuner reception is poor, set CD player power off by the CD power manage function. CD power is factory set to on. 1 Press FUNCTION repeatedly to switch the function to CD. 2 Press ?/1 to turn off the system. 3 Press ?/1 on the unit while holding CD x on the unit. “CD POWER” and “OFF” appear. To set the CD power on Repeat the procedure above, and “CD POWER” and “ON” appear. Notes • When “CD POWER” and “OFF” are selected, CD access time is increased. • In Power Saving Mode, switching the CD power on or off using the CD power manage function is not possible. Listening to the radio You can listen to a radio station either by selecting a preset station, or by manually tuning in the station. Listening to a preset station — Preset Tuning Preset radio stations in the tuner’s memory first (see “Presetting radio stations” on page 11). 1 Press TUNER/BAND repeatedly to select “FM” or “AM”. 2 Press TUNING MODE repeatedly until “PRESET” appears in the display. 3 Press +/– (or turn TUNING +/– on the unit) repeatedly to select the desired preset station. Listening to non-preset radio station — Manual Tuning 1 Press TUNER/BAND repeatedly to select “FM” or “AM”. 2 Press TUNING MODE repeatedly until “AUTO” and “PRESET” disappear from the display. 3 Press +/– (or turn TUNING +/– on the unit) repeatedly to tune in the desired station. Tips • To improve broadcast reception, adjust the supplied antennas, or connect a commercially available external antenna. • When an FM stereo program has static noise, press FM MODE repeatedly until “MONO” appears. There will be no stereo effect, but the reception will improve. • Press TUNING MODE repeatedly until “AUTO” appears in step 2 above, then press +/– (or turn TUNING +/– on the unit). The frequency indication changes and scanning stops when the system tunes in a station (Automatic Tuning). • To record the radio programs, use manual recording (pages 16 and 18). 12GB Using the Radio Data System (RDS) (European model only) What is the Radio Data System? Radio Data System (RDS) is a broadcasting service that allows radio stations to send additional information along with the regular program signal. RDS is available only on FM stations.* Note RDS may not work properly if the station you are tuned in is not transmitting the RDS signal properly or if the signal is weak. * Not all FM stations provide RDS service, nor do they provide the same types of services. If you are not familiar with the RDS system, check with your local radio stations for details on RDS services in your area. Tuner Receiving RDS broadcasts Simply select a station from the FM band. When you tune in a station that provides RDS services, the station name appears in the display. To check the RDS information Each time you press DISPLAY, the display changes cyclically as follows: Station name* t Frequency t Clock display t Bass level t Treble level * If the RDS broadcast is not properly received, the station name may not appear in the display. 13GB Tape – Play Loading a tape 1 Press TAPE Z on the unit. 2 Load a tape into the cassette holder. With the side you want to play/record facing towards you. Playing a tape You can use TYPE I (normal) tape. 1 Press TAPE (or FUNCTION repeatedly) to switch the function to TAPE. 2 Press DIRECTION on the unit repeatedly to select “g” to play one side of a tape, “h” to play both sides, or “j”* to play both sides repeatedly. * The tape deck stops automatically after repeating the sequence 5 times. 3 Press N (or TAPE nN on the unit). Press N (or TAPE nN on the unit) again to play the reverse side. Other operations To Do this Stop play Press x. Pause Press X. Press again to resume play. Fast-forward or Press...