Assessments - 2, GPA: 3.5
(
)
)
|
por este dispositivo também tem outras instruções :
Facilidade de uso
Press ./> repeatedly to set the minute, then press ENTER. 6 Set the time to stop playing following the same procedure as step 5. 7 Press ./> repeatedly until the desired sound source appears. Each time you press the button, the display changes cyclically as follows: t TUNER y CD PLAY T t TAPE PLAY T 8 Press ENTER. The start time, the stop time and the sound source appear in turn, then the original display returns. 9 Press ?/1 to turn off the system. Sound Adjustment/Timer continued 17GB Other operations To Do this Check the settings 1 Press CLOCK/TIMER SELECT. 2 Press ./> repeatedly until “PLAY SEL” appears, then press ENTER. Change the setting Start over from step 1. Cancel the timer 1 Press CLOCK/TIMER SELECT. 2 Press ./> repeatedly until “TIMER OFF” appears, then press ENTER. Notes • If you use Play Timer and Sleep Timer at the same time, Sleep Timer has priority. • Do not operate the system from the time the system turns on until the play starts (about 15 seconds before the preset time). • If the system is on about 15 seconds before the preset time, Play Timer will not be activated. • You cannot use the optional component connected to MD/VIDEO IN jacks as the sound source for Play Timer. • You cannot activate Play Timer and Timer recording simultaneously. Timer recording radio programs To timer record, you must first preset the radio station (see “Presetting radio stations” on page 11) and set the clock (see “Setting the clock” on page 7). Use buttons on the remote for the operation. 1 Tune in the preset radio station (see “Listening to a preset station” on page 12). 2 Press CLOCK/TIMER SET. 3 Press ./> repeatedly until “REC SET” appears, then press ENTER. “ON” appears with a flashing hour indication. 4 Set the time to start recording. Press ./> repeatedly to set the hour, then press ENTER. The minute indication flashes. Press ./> repeatedly to set the minute, then press ENTER. 5 Set the time to stop recording following the same procedure as step 4. Timer Recording settings and the desired station appear, then the original display returns. 6 Load a recordable tape and press TAPE (or FUNCTION repeatedly) to switch the function to TAPE. 7 Press DIRECTION on the unit repeatedly until g appears to record on one side or h (or j) to record on both sides. 8 Press N (or TAPE nN on the unit) repeatedly to select recording side, then press x. If you select both sides recording or front side recording, press N (or TAPE nN on the unit) until “N” appears. If you record on the reverse side, press N (or TAPE nN on the unit) again until “n” appears. 9 Press ?/1 to turn off the system. 18GB Other operations To Do this Check the settings 1 Press CLOCK/TIMER SELECT. 2 Press ./> repeatedly until “REC SEL” appears, then press ENTER. Change the setting Start over from step 1. Cancel the timer 1 Press CLOCK/TIMER SELECT. 2 Press ./> repeatedly until “TIMER OFF” appears, then press ENTER. Notes • If you use Timer Recording and Sleep Timer at the same time, Sleep Timer has priority. • Do not operate the system from the time the system turns on until the recording starts (about 15 seconds before the preset time). • If the system is on about 15 seconds before the preset time, Timer Recording will not be activated. • The volume is reduced to minimum during recording. • You cannot activate Play Timer and Timer Recording simultaneously. Tape – Recording 19GB Display Turning off the display — Power Saving Mode The clock display can be turned off to minimize the amount of power consumed during standby (Power Saving Mode). Press DISPLAY repeatedly while the system is off until the clock display disappears. To cancel Power Saving Mode Press DISPLAY while the system is off. Each time you press the button, the display switches cyclically as follows: Clock display* y No display (Power Saving Mode) * The clock is displayed only if you set the clock. Tips • ?/1 indicator lights up even in Power Saving Mode. • The timer continues to operate in Power Saving Mode. Note You cannot perform the following operations in Power Saving Mode. – setting the clock – changing the AM tuning interval (except for European models) – switching the MD/VIDEO function – changing the CD power manage function Viewing information about the disc in the display You can check the playing time and remaining time of the current track or that of the disc. When a CD-TEXT disc or a disc with MP3 audio tracks is loaded, you can also check the information recorded on disc, such as the titles. Checking the remaining time (CD/MP3) Press DISPLAY during Normal Play. Each time you press the button, the display changes cyclically as follows: Current track number and elapsed playing time t Current track number and remaining time or “– –.– –”1) t Remaining time of the disc2) or “– –.– –”1) t Track title of CD-TEXT disc3) or disc with MP3 audio tracks4) t Album name1) t Clock display t Bass level t Treble level 1) For discs with MP3 audio tracks 2) “– –.– –” appears in Program Play mod...